Top 24 Glass Microfiber Filter Papers for 2020

 

125 cm - Glass Microfiber Filter Paper Grade 193 Ahlstrom

12.5 cm – Glass Microfiber Filter Paper, Grade 193, Ahlstrom

12.5 cm – Glass Microfiber Filter Paper, Grade 193, Ahlstrom - It is recommended for use in the toxicity characteristic leaching procedure (tclp) as described in epa method 1311. Ahlstrom grade 193 is a binder-free microfiber glass filter made with acid-treated borosilicated glass microfibers with inherently low levels of barium and zind the filter media contains no binders or other additives that may cause interference with samples.

 

Ahlstrom 1410-0470 Grade 141 Glass Microfiber Filter Paper 470 cm Diameter Pack of 100

Ahlstrom 1410-0470 Grade 141 Glass Microfiber Filter Paper, 4.70 cm Diameter (Pack of 100)

Ahlstrom 1410-0470 Grade 141 Glass Microfiber Filter Paper, 4.70 cm Diameter (Pack of 100) - Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required.

 

Ahlstrom 1510-0700 Borosilicate Glass Microfiber Filter Paper 07 Micron Slow Flow Grade 151 7cm Diameter Box of 100

Ahlstrom 1510-0700 Borosilicate Glass Microfiber Filter Paper, 0.7 Micron, Slow Flow, Grade 151, 7cm Diameter (Box of 100)

Ahlstrom 1510-0700 Borosilicate Glass Microfiber Filter Paper, 0.7 Micron, Slow Flow, Grade 151, 7cm Diameter (Box of 100) - Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Applications for glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. In the filtration of nucleic acids and difficult biochemical solutions, grade 151 is used in combination with grade 141 as a highly efficient protective and retentive pre-filter to extend the loading capacity of membrane filters. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, fine particle retention 0. 1 micrometer, high loading capacity, chemical and thermal resistance (up to 500 percent c), long shelf life, brilliant white color reflecting more than 96 degree of visible light, custom cut. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Grade 151 is recommended for use in tclp procedure as described in test methods for evaluating solid wastes, epa method 1311. Grade 151 is recommended for filtering fine precipitated proteins. This high performance grade is designed to retain extremely fine particles down to 0. 7 micrometer. Grade 151 has retention comparable to membrane filter while providing higher flow and loading capacity. 7 micrometer, 3.

 

Ahlstrom 1610-1250 Grade 161 Glass Microfiber Filter Paper 125 cm Diameter Pack of 100

Ahlstrom 1610-1250 Grade 161 Glass Microfiber Filter Paper, 12.5 cm Diameter (Pack of 100)

Ahlstrom 1610-1250 Grade 161 Glass Microfiber Filter Paper, 12.5 cm Diameter (Pack of 100) - Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass.

 

Ahlstrom 1610-0550 Borosilicate Glass Microfiber Filter Paper 11 Micron Medium Flow Grade 161 55cm Diameter Box of 100

Ahlstrom 1610-0550 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 5.5cm Diameter (Box of 100)

Ahlstrom 1610-0550 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 5.5cm Diameter (Box of 100) - It is also found in the filtration of hot gases and liquids, and in pre-filtration. Grade 161 is generally recommended for water pollution monitoring techniques for total suspended solids. Microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Grade 161 is used in general laboratory applications, cell harvesting, liquid scintillation counting, and in the monitoring of air and water pollution. This popular grade offers finer particle retention and higher flow rate than traditional analytical filter papers. Standard glass microfiber filters. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging.

 

Glass Microfiber Filter Paper 70 cm

Glass Microfiber Filter Paper 7.0 cm

Glass Microfiber Filter Paper 7.0 cm - Ahlstrom 141 3. Laboratory analysis 100% pure borosilicate glass rapid flow rate fine particle retention 0. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Ahlstrom 141 is particularly recommended for pre-filtration of membrane filters and is also used in combination with ahlstrom 121 as a highly efficient protective and retentive grade density pre-filter for membrane filters. 1 m high loading capacity chemical and thermal resistance (up to 500c) long shelf life brilliant white color reflecting more than 96% of visible light custom cut standard glass microfiber filters standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. 1m, fast speed this grade offers better filtration speed and a higher loading capacity than an analytical filter paper of similar particle retention. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. 7m, 3.

 

Ahlstrom 1610-3200 Borosilicate Glass Microfiber Filter Paper 11 Micron Medium Flow Grade 161 32cm Diameter Box of 100

Ahlstrom 1610-3200 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 32cm Diameter (Box of 100)

Ahlstrom 1610-3200 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 32cm Diameter (Box of 100) - Microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Grade 161 is generally recommended for water pollution monitoring techniques for total suspended solids. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut. This popular grade offers finer particle retention and higher flow rate than traditional analytical filter papers. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. It is also found in the filtration of hot gases and liquids, and in pre-filtration. Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Standard glass microfiber filters. Grade 161 is used in general laboratory applications, cell harvesting, liquid scintillation counting, and in the monitoring of air and water pollution.

 

Glass Microfiber Filter Paper 125 cm

Glass Microfiber Filter Paper 12.5 cm

Glass Microfiber Filter Paper 12.5 cm - Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. 1 m high loading capacity chemical and thermal resistance (up to 500c) long shelf life brilliant white color reflecting more than 96% of visible light custom cut standard glass microfiber filters standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. 0m, medium speed this very thick grade offers finer particle retention than ahlstrom 111 with high wet strength and loading capacity. Ahlstrom 121 is recommended for the clarification of liquid suspensions loaded with fine particulates. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Laboratory analysis 100% pure borosilicate glass rapid flow rate fine particle retention 0. 7m, 3. Ahlstrom 121 1. Ahlstrom 121 is also used in membrane pre-filtration and is also found in quantification of solids, and lsc (liquid scintillation counting) techniques th. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required.

 

Glass Microfiber Filter Paper 21 cm

Glass Microfiber Filter Paper 2.1 cm

Glass Microfiber Filter Paper 2.1 cm - 1 m high loading capacity chemical and thermal resistance (up to 500c) long shelf life brilliant white color reflecting more than 96% of visible light custom cut standard glass microfiber filters standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Ahlstrom 131 is recommended for the collection of suspended solids in potable water and in industrial wastes. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Ahlstrom 131 1. 7m, 3. In biochemical tests, ahlstrom 131 is suited for cell harvesting, liquid scintillation countin. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. 0m, medium speed this standard grade found in many environmental applications offers slightly more retention than ahlstrom 111 with slightly lower filtration speed and loading capacity. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Laboratory analysis 100% pure borosilicate glass rapid flow rate fine particle retention 0.

 

Ahlstrom 1310-0700 Grade 131 Glass Microfiber Filter Paper 70 cm Diameter Pack of 100

Ahlstrom 1310-0700 Grade 131 Glass Microfiber Filter Paper, 7.0 cm Diameter (Pack of 100)

Ahlstrom 1310-0700 Grade 131 Glass Microfiber Filter Paper, 7.0 cm Diameter (Pack of 100) - Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples.

 

Ahlstrom 1310-0250 Grade 131 Glass Microfiber Filter Paper 25 cm Diameter Pack of 100

Ahlstrom 1310-0250 Grade 131 Glass Microfiber Filter Paper, 2.5 cm Diameter (Pack of 100)

Ahlstrom 1310-0250 Grade 131 Glass Microfiber Filter Paper, 2.5 cm Diameter (Pack of 100) - Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration.

 

Borosilicate Glass Microfiber Filter Paper 47mm 16μm Binder Free GF 250mlmin·cm² Pack of 100

Borosilicate Glass Microfiber Filter Paper 47mm, 1.6μm Binder Free GF 250ml/min·cm², Pack of 100

Borosilicate Glass Microfiber Filter Paper 47mm, 1.6μm Binder Free GF 250ml/min·cm², Pack of 100 - Long shelf life. Rapid flow rate. 100 percent pure borosilicate glass. Laboratory analysis. High loading capacity.

 

Ahlstrom 1410-3200 Borosilicate Glass Microfiber Filter Paper 31 Micron Medium Flow Grade 141 32cm Diameter Pack of 100

Ahlstrom 1410-3200 Borosilicate Glass Microfiber Filter Paper, 3.1 Micron, Medium Flow, Grade 141, 32cm Diameter (Pack of 100)

Ahlstrom 1410-3200 Borosilicate Glass Microfiber Filter Paper, 3.1 Micron, Medium Flow, Grade 141, 32cm Diameter (Pack of 100) - 100 percent pure borosilicate glass microfibers contains no binders or additives. Grade 141 (3. 1 micrometer, chemical and thermal resistance (up to 550 degree c), long shelf life. Widely used as a depth type pre-filter ahead of final membrane filters. 1 micrometer) must faster filtration speed with higher loading capacity than cellulose analytical papers with similar particle retention. High loading capacity, consistent uniformity and excellent weight repeatability, rapid flow rate, particle retention range 0. 7, 3. Sometimes used in combination with grade 121 as a graded porosity protective and retentive pre-filter for highly-efficient protection of membrane filters.

 

Glass Microfiber Filter Paper 425 cm

Glass Microfiber Filter Paper 4.25 cm

Glass Microfiber Filter Paper 4.25 cm - Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. 1 m high loading capacity chemical and thermal resistance (up to 500c) long shelf life brilliant white color reflecting more than 96% of visible light custom cut standard glass microfiber filters standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. 1m, fast speed this grade offers better filtration speed and a higher loading capacity than an analytical filter paper of similar particle retention. Laboratory analysis 100% pure borosilicate glass rapid flow rate fine particle retention 0. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Ahlstrom 141 is particularly recommended for pre-filtration of membrane filters and is also used in combination with ahlstrom 121 as a highly efficient protective and retentive grade density pre-filter for membrane filters. Ahlstrom 141 3. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. 7m, 3. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration.

 

Ahlstrom 1510-0550 Borosilicate Glass Microfiber Filter Paper 07 Micron Slow Flow Grade 151 55cm Diameter Box of 100

Ahlstrom 1510-0550 Borosilicate Glass Microfiber Filter Paper, 0.7 Micron, Slow Flow, Grade 151, 5.5cm Diameter (Box of 100)

Ahlstrom 1510-0550 Borosilicate Glass Microfiber Filter Paper, 0.7 Micron, Slow Flow, Grade 151, 5.5cm Diameter (Box of 100) - 7 micrometer. In the filtration of nucleic acids and difficult biochemical solutions, grade 151 is used in combination with grade 141 as a highly efficient protective and retentive pre-filter to extend the loading capacity of membrane filters. Applications for glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. This high performance grade is designed to retain extremely fine particles down to 0. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, fine particle retention 0. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Grade 151 is recommended for use in tclp procedure as described in test methods for evaluating solid wastes, epa method 1311. 1 micrometer, high loading capacity, chemical and thermal resistance (up to 500 percent c), long shelf life, brilliant white color reflecting more than 96 degree of visible light, custom cut. 7 micrometer, 3. Grade 151 has retention comparable to membrane filter while providing higher flow and loading capacity. Grade 151 is recommended for filtering fine precipitated proteins. Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass.

 

Glass Microfiber Filter Paper 21 cm

Glass Microfiber Filter Paper 2.1 cm

Glass Microfiber Filter Paper 2.1 cm - 1 independent temperature safety device (din 12880) with visual temperature alarm computer interface rs 422. Line preheating chamber technology gravity convection adjustable exhaust air flap controller with timer functions inner door made of tempered safety glass 2 chrome-plated racks units up to 115 liters are stackable class 3. Temperature range room temperature plus 5c to 100c apt.

 

Glass Microfiber Filter Paper 21 cm

Glass Microfiber Filter Paper 2.1 cm

Glass Microfiber Filter Paper 2.1 cm - Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Ahlstrom 141 3. 7m, 3. Ahlstrom 141 is particularly recommended for pre-filtration of membrane filters and is also used in combination with ahlstrom 121 as a highly efficient protective and retentive grade density pre-filter for membrane filters. 1 m high loading capacity chemical and thermal resistance (up to 500c) long shelf life brilliant white color reflecting more than 96% of visible light custom cut standard glass microfiber filters standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. 1m, fast speed this grade offers better filtration speed and a higher loading capacity than an analytical filter paper of similar particle retention. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Laboratory analysis 100% pure borosilicate glass rapid flow rate fine particle retention 0.

 

Ahlstrom 1310-0240 Grade 131 Glass Microfiber Filter Paper 24 cm Diameter Pack of 100

Ahlstrom 1310-0240 Grade 131 Glass Microfiber Filter Paper, 2.4 cm Diameter (Pack of 100)

Ahlstrom 1310-0240 Grade 131 Glass Microfiber Filter Paper, 2.4 cm Diameter (Pack of 100) - Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples.

 

Glass Microfiber Filter Paper 70 cm

Glass Microfiber Filter Paper 7.0 cm

Glass Microfiber Filter Paper 7.0 cm - Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Ahlstrom 121 is also used in membrane pre-filtration and is also found in quantification of solids, and lsc (liquid scintillation counting) techniques th. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. 7m, 3. 1 m high loading capacity chemical and thermal resistance (up to 500c) long shelf life brilliant white color reflecting more than 96% of visible light custom cut standard glass microfiber filters standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Laboratory analysis 100% pure borosilicate glass rapid flow rate fine particle retention 0. Ahlstrom 121 1. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. 0m, medium speed this very thick grade offers finer particle retention than ahlstrom 111 with high wet strength and loading capacity. Ahlstrom 121 is recommended for the clarification of liquid suspensions loaded with fine particulates.

 

1930-1500 - 15 cm - Glass Microfiber Filter Paper Grade 193 Ahlstrom - Pack of 100

1930-1500 – 15 cm – Glass Microfiber Filter Paper, Grade 193, Ahlstrom – Pack of 100

1930-1500 – 15 cm – Glass Microfiber Filter Paper, Grade 193, Ahlstrom – Pack of 100 - Ahlstrom grade 193 is a binder-free microfiber glass filter made with acid-treated borosilicated glass microfibers with inherently low levels of barium and zind the filter media contains no binders or other additives that may cause interference with samples. It is recommended for use in the toxicity characteristic leaching procedure (tclp) as described in epa method 1311.

 

Ahlstrom 1510-1100 Glass Microfiber Filter Paper 151 1 Centimeters Height 1 Centimeters Wide 11 Centimeters Length Borosilicate Glass Pack of 100

Ahlstrom 1510-1100 Glass Microfiber Filter Paper, 151, 1 Centimeters Height, 1 Centimeters Wide, 11 Centimeters Length, Borosilicate Glass (Pack of 100)

Ahlstrom 1510-1100 Glass Microfiber Filter Paper, 151, 1 Centimeters Height, 1 Centimeters Wide, 11 Centimeters Length, Borosilicate Glass (Pack of 100) - Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass.

 

Ahlstrom 1610-0425 Borosilicate Glass Microfiber Filter Paper 11 Micron Medium Flow Grade 161 425cm Diameter Box of 100

Ahlstrom 1610-0425 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 4.25cm Diameter (Box of 100)

Ahlstrom 1610-0425 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 4.25cm Diameter (Box of 100) - Microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Grade 161 is used in general laboratory applications, cell harvesting, liquid scintillation counting, and in the monitoring of air and water pollution. It is also found in the filtration of hot gases and liquids, and in pre-filtration. Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut. Standard glass microfiber filters. Grade 161 is generally recommended for water pollution monitoring techniques for total suspended solids. This popular grade offers finer particle retention and higher flow rate than traditional analytical filter papers. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions.

 

Ahlstrom 1310-0425 Grade 131 Glass Microfiber Filter Paper 425 cm Diameter Pack of 100

Ahlstrom 1310-0425 Grade 131 Glass Microfiber Filter Paper, 4.25 cm Diameter (Pack of 100)

Ahlstrom 1310-0425 Grade 131 Glass Microfiber Filter Paper, 4.25 cm Diameter (Pack of 100) - Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required.

 

0260-0900 - 9 cm - Glass Microfiber Filter Paper Grade 26 Ahlstrom - Pack of 50

0260-0900 – 9 cm – Glass Microfiber Filter Paper, Grade 26, Ahlstrom – Pack of 50

0260-0900 – 9 cm – Glass Microfiber Filter Paper, Grade 26, Ahlstrom – Pack of 50 - It is recommended for use in the toxicity characteristic leaching procedure (tclp) as described in epa method 1311. Ahlstrom grade 26 is a binder-free microfiber glass filter made with acid-treated borosilicated glass microfibers with inherently low levels of barium and zinc it is then acid-washed using the 1n hno3, as described in the epa method 1311, and thoroughly rinsed in a multi-stage process using copious amounts of high-purity deionized water. The filter media contains no binders or other additives that may cause interference with samples.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.