Top 23 Polypropylene Test Tube Racks for 2019

 

Full-Size Polypropylene Test Tube Racks 13mm 72 place Red pk of 8

Full-Size Polypropylene Test Tube Racks 13mm 72 place (Red) (pk of 8)

Full-Size Polypropylene Test Tube Racks 13mm 72 place (Red) (pk of 8) - Racks are made of delrin® fiberglass-reinforced polyoxymethylene (pom), an engineering polymer developed by dupont to have exceptional chemical and heat resistance. Autoclavable racks molded in a single, continuous piece-no assembly required and no detachable pieces. Includes molded-in index coordinates and flat areas for labeling.

 

Nalgene 5930-0030 Polypropylene Test Tube Rack for 25-30mm Test Tubes

Nalgene 5930-0030 Polypropylene Test Tube Rack for 25-30mm Test Tubes

Nalgene 5930-0030 Polypropylene Test Tube Rack for 25-30mm Test Tubes - Can be stacked when empty has molded-in handles for easy carrying superior chemical resistance. Holds twenty-four 30mm culture tubes holes are keyed with molded-in numbers and letters for easy tube identification. Material polypropylene. Non-autoclavable. Tube diameter 25-30mm array 3 x 8 size (l x w) 32 x 115cm.

 

BrandTech 4340013 18mm 55 Tubes Yellow Polypropylene Test Tube Rack 5 x 11 Tube -20 to 90 Degree C Operating Temperature Pack of 5

BrandTech 4340013 18mm 55 Tubes Yellow Polypropylene Test Tube Rack, 5 x 11 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5)

BrandTech 4340013 18mm 55 Tubes Yellow Polypropylene Test Tube Rack, 5 x 11 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5) - Will not float in water bath alphanumerical positions for clear sample identification. Accommodates 58 tubes with a diameter of up to 18mm yellow. Polypropylene rack snaps together for easy assembly, sturdy construction, stackable, and is available in four colors. Tube position format 5 x 11. Wide spaces between positions operating temperature -20 to 90°c autoclavable at 121°c.

 

Nalgene 5930-0016 Polypropylene Test Tube Rack for 13-16mm Test Tubes

Nalgene 5930-0016 Polypropylene Test Tube Rack for 13-16mm Test Tubes

Nalgene 5930-0016 Polypropylene Test Tube Rack for 13-16mm Test Tubes - Holds forty 16mm culture tubes holes are keyed with molded-in numbers and letters for easy tube identification. Material polypropylene. Can be stacked when empty has molded-in handles for easy carrying superior chemical resistance. Tube diameter 13-16mm array 4 x 10 size (l x w) 285 x 115cm. Non-autoclavable.

 

BrandTech 4340061 16mm 55 Tubes Blue Polypropylene Test Tube Rack 5 x 11 Tube -20 to 90 Degree C Operating Temperature Pack of 5

BrandTech 4340061 16mm 55 Tubes Blue Polypropylene Test Tube Rack, 5 x 11 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5)

BrandTech 4340061 16mm 55 Tubes Blue Polypropylene Test Tube Rack, 5 x 11 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5) - Polypropylene rack snaps together for easy assembly, sturdy construction, stackable, and is available in four colors. Wide spaces between positions operating temperature -20 to 90°c autoclavable at 121°c. Accommodates 55 tubes with a diameter of up to 16mm blue. Will not float in water bath alphanumerical positions for clear sample identification. Tube position format 5 x 11.

 

BrandTech 4340023 20mm 40 Tubes Yellow Polypropylene Test Tube Rack 4 x 10 Tube -20 to 90 Degree C Operating Temperature Pack of 5

BrandTech 4340023 20mm 40 Tubes Yellow Polypropylene Test Tube Rack, 4 x 10 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5)

BrandTech 4340023 20mm 40 Tubes Yellow Polypropylene Test Tube Rack, 4 x 10 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5) - Tube position format 4 x 10. Wide spaces between positions operating temperature -20 to 90°c autoclavable at 121°c. Polypropylene rack snaps together for easy assembly, sturdy construction, stackable, and is available in four colors. Will not float in water bath alphanumerical positions for clear sample identification. Accommodates 40 tubes with a diameter of up to 20mm yellow.

 

Nalgene Unwire Polypropylene Test Tube Rack 16mm White Case of 8

Nalgene Unwire Polypropylene Test Tube Rack, 16mm, White (Case of 8)

Nalgene Unwire Polypropylene Test Tube Rack, 16mm, White (Case of 8) - Provides an unrestricted view of tubes. Available in four bright colors to help keep samples organized. Hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm sizes or up to 72 smaller diameter tubes can be held at once. Endplates accept large labels, for easy identification of samples. Higher specific gravity than water so stays submerged in a water bath-won’t float.

 

Scienceware 18910-0102 Polypropylene test tube rack

Scienceware 18910-0102 Polypropylene test tube rack

Scienceware 18910-0102 Polypropylene test tube rack - Rack holds 80 tubes in five rows of 16, or 102 inverted for draining or drying. Polypropylene (pp) rack allows full view of contents in size 10- to 13-mm tubes. Autoclavable.

 

Nalgene 5930-0025 Polypropylene Test Tube Rack for 21-25mm Test Tubes

Nalgene 5930-0025 Polypropylene Test Tube Rack for 21-25mm Test Tubes

Nalgene 5930-0025 Polypropylene Test Tube Rack for 21-25mm Test Tubes - Can be stacked when empty has molded-in handles for easy carrying superior chemical resistance. Tube diameter 21-25mm array 3 x 8 size (l x w) 32 x 115cm. Holds twenty-four 25mm culture tubes holes are keyed with molded-in numbers and letters for easy tube identification. Material polypropylene. Non-autoclavable.

 

Fisherbrand Two-Tier Polypropylene Test Tube Racks Vial Support Serum 16-20mm

Fisherbrand Two-Tier Polypropylene Test Tube Racks, Vial Support Serum 16-20mm

Fisherbrand Two-Tier Polypropylene Test Tube Racks, Vial Support Serum 16-20mm - Fit most water baths for elevated temperature incubations. Hold serum vials, ria vials, t3 or t4 reaction vials, or any other vial or tube of same dimensionsw.

 

BrandTech 4340003 13mm 84 Tubes Yellow Polypropylene Test Tube Rack 6 x 14 Tube -20 to 90 Degree C Operating Temperature Pack of 5

BrandTech 4340003 13mm 84 Tubes Yellow Polypropylene Test Tube Rack, 6 x 14 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5)

BrandTech 4340003 13mm 84 Tubes Yellow Polypropylene Test Tube Rack, 6 x 14 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5) - Wide spaces between positions operating temperature -20 to 90°c autoclavable at 121°c. Accommodates 84 tubes with a diameter of up to 13mm yellow. Will not float in water bath alphanumerical positions for clear sample identification. Polypropylene rack snaps together for easy assembly, sturdy construction, stackable, and is available in four colors. Tube position format 6 x 14.

 

Nalgene Polypropylene Test Tube Racks 40 Hole 285cm L x 115cm W Case of 4

Nalgene Polypropylene Test Tube Racks, 40 Hole, 28.5cm L x 11.5cm W (Case of 4)

Nalgene Polypropylene Test Tube Racks, 40 Hole, 28.5cm L x 11.5cm W (Case of 4) - Higher specific gravity than water so stays submerged in a water bath-won’t float. Superior chemical resistance make these compatible for many chemicals in the lab. Will stack with other racks of same length to save space when not in use. Holes are keyed with molded-in numbers and letters for easy identification of tubes. Handles make these racks easy to carry.

 

Nalgene Unwire Polypropylene Test Tube Rack 13mm Red Case of 8

Nalgene Unwire Polypropylene Test Tube Rack, 13mm, Red (Case of 8)

Nalgene Unwire Polypropylene Test Tube Rack, 13mm, Red (Case of 8) - Available in four bright colors to help keep samples organized. Endplates accept large labels, for easy identification of samples. Higher specific gravity than water so stays submerged in a water bath-won’t float. Hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm sizes or up to 72 smaller diameter tubes can be held at once.

 

Nalgene Unwire Polypropylene Test Tube Rack 17 mm Blue Case of 8

Nalgene Unwire Polypropylene Test Tube Rack, 17 mm, Blue (Case of 8)

Nalgene Unwire Polypropylene Test Tube Rack, 17 mm, Blue (Case of 8) - Suitable for drying glass plates and used in electrophoresis and chromatography plates. Consist of an array of pegs spaced to hold given-diameter test tubes while allowing full view of the tube contents. Higher specific gravity than water so stays submerged in a water bath-won’t float. When inverted, ribs keep tubes off base to allow drainage through holes and minimize collection of airborne contaminants inside the tubes. Pegs also hold tubes in inverted position for drying.

 

HEATHROW SCIENTIFIC HS27552D One Rack Full-Size Polypropylene Test Tube Rack Magenta 16 mm x 72 Tubes 5 L x 988 W x 275 H Pack of 8

HEATHROW SCIENTIFIC HS27552D One Rack Full-Size Polypropylene Test Tube Rack, Magenta, 16 mm x 72 Tubes, 5″ L x 9.88″ W x 2.75″ H (Pack of 8)

HEATHROW SCIENTIFIC HS27552D One Rack Full-Size Polypropylene Test Tube Rack, Magenta, 16 mm x 72 Tubes, 5″ L x 9.88″ W x 2.75″ H (Pack of 8) - Molded index coordinates within the rack keep samples well ordered, along with flat labeling areas. The heathrow one rack full-size polypropylene test tube racks are durable and convenient racks are molded in a single, continuous piece so no assemblage is required. Coming in a case of eight, these racks are not recommended for an autoclave, however with an engineered polymer developed by dupont, these racks have excellent chemical resistance and heating capacity. Racks hold tubes ranging in size from 13mm-16mm. Made of a polypropylene that adds clarity to the racks, heathrow scientific polypropylene test tube racks are ideal for holding sample collection tubes, reaction tubes and test tubes in environments where samples need to be seen at all times.

 

Nalgene Unwire Polypropylene Test Tube Rack 13mm White Case of 8

Nalgene Unwire Polypropylene Test Tube Rack, 13mm, White (Case of 8)

Nalgene Unwire Polypropylene Test Tube Rack, 13mm, White (Case of 8) - Available in four bright colors to help keep samples organized. Endplates accept large labels, for easy identification of samples. Higher specific gravity than water so stays submerged in a water bath-won’t float. Hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm sizes or up to 72 smaller diameter tubes can be held at once.

 

Nalgene 5976-0013 Polypropylene Unwire Test Tube Rack for 13mm Test Tubes White

Nalgene 5976-0013 Polypropylene Unwire Test Tube Rack for 13mm Test Tubes, White

Nalgene 5976-0013 Polypropylene Unwire Test Tube Rack for 13mm Test Tubes, White - Not autoclavable. Color white. Racks will not float in water baths. Dimensions (l x w x h) 200 x 102 x 57mm. Rack securely holds a full load of seventy-two (72) test tubes in a 6 x 12 array. Tube size 13mm. This 13mm polypropylene test tube rack offers the same innovative design as unwire™ test tube racks made using resmer™ manufacturing technology. Capacity 72 tubes. Stackable when empty to save space. Nalgene # 5976-0013. Material polypropylene. Array 6 x 12.

 

Nalgene Unwire Polypropylene Test Tube Rack 13mm White Case of 8

Nalgene Unwire Polypropylene Test Tube Rack, 13mm, White (Case of 8)

Nalgene Unwire Polypropylene Test Tube Rack, 13mm, White (Case of 8) - Autoclavable. Suitable for drying glass plates and used in electrophoresis and chromatography plates. Higher specific gravity than water so stays submerged in a water bath-won’t float. Consist of an array of pegs spaced to hold given-diameter test tubes while allowing full view of the tube contents. When inverted, ribs keep tubes off base to allow drainage through holes and minimize collection of airborne contaminants inside the tubes.

 

OneRack Full-Size Polypropylene Test Tube Racks 16mm White 8pack

OneRack Full-Size Polypropylene Test Tube Racks, 16mm, White, 8/pack

OneRack Full-Size Polypropylene Test Tube Racks, 16mm, White, 8/pack - Available in four bright colors to help keep samples organized. Hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm sizes or up to 72 smaller diameter tubes can be held at once. Endplates accept large labels, for easy identification of samples. Higher specific gravity than water so stays submerged in a water bath-won’t float.

 

Full-Size Polypropylene Test Tube Racks 13mm 72 place Blue pk of 8

Full-Size Polypropylene Test Tube Racks 13mm 72 place (Blue) (pk of 8)

Full-Size Polypropylene Test Tube Racks 13mm 72 place (Blue) (pk of 8) - Racks are made of delrin® fiberglass-reinforced polyoxymethylene (pom), an engineering polymer developed by dupont to have exceptional chemical and heat resistance. Autoclavable racks molded in a single, continuous piece-no assembly required and no detachable pieces. Includes molded-in index coordinates and flat areas for labeling.

 

Fisherbrand Three-Tier Polypropylene Test Tube Racks 13 to 16mm

Fisherbrand Three-Tier Polypropylene Test Tube Racks, 13 to 16mm

Fisherbrand Three-Tier Polypropylene Test Tube Racks, 13 to 16mm - Won’t deteriorate in bath, won’t rust. Molded racks provide rigid support when fully loaded–reduce breakagestack neatly empty or filleda.

 

BrandTech 4340040 30mm 21 Tubes White Polypropylene Test Tube Rack 3 x 7 Tube -20 to 90 Degree C Operating Temperature Pack of 5

BrandTech 4340040 30mm 21 Tubes White Polypropylene Test Tube Rack, 3 x 7 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5)

BrandTech 4340040 30mm 21 Tubes White Polypropylene Test Tube Rack, 3 x 7 Tube, -20 to 90 Degree C Operating Temperature (Pack of 5) - Wide spaces between positions operating temperature -20 to 90°c autoclavable at 121°c. Tube position format 3 x 7. Accommodates 21 tubes with a diameter of up to 30mm white. Will not float in water bath alphanumerical positions for clear sample identification. Polypropylene rack snaps together for easy assembly, sturdy construction, stackable, and is available in four colors.

 

Globe Scientific 456508 Polypropylene Test Tube Rack for 1617mm Tubes 60 Holes Pink

Globe Scientific 456508 Polypropylene Test Tube Rack for 16/17mm Tubes, 60 Holes, Pink

Globe Scientific 456508 Polypropylene Test Tube Rack for 16/17mm Tubes, 60 Holes, Pink - This innovative line of plastic test tube racks are shipped flat in order to reduce shelf space and then simply snap together for use. These racks can be used in freezers without deforming or going brittle. Alphanumeric markings are molded into the racks to provide easy test tube identification. They are available in assorted colors for sample coding or aesthetics. The special design allows all samples to be incubated at the same temperature. They will not rot, rust of deform.