Top 21 Best Steel Supports

 

American Educational 7-G87-A Stamped Steel Support Ring Stand with 2 Rings 6 Length x 4 Width Base Size

American Educational 7-G87-A Stamped Steel Support Ring Stand with 2 Rings, 6″ Length x 4″ Width Base Size

American Educational 7-G87-A Stamped Steel Support Ring Stand with 2 Rings, 6″ Length x 4″ Width Base Size - Coated with an acid resistant finish. Made of stamped steel, strong and dependable support. Base 6″ length by 4″ width rod 5/16″ diameter by 18″ length. The rods are nickel plated steel and are threaded to fit the base. Support ringstand, stamped steel, base 4″x6″, rod 5/16″x18″, and two rings, 3″ and 4″.

 

Eisco Labs 8 x 5 Steel Support Ring Stand with 3 Rings 8 Length x 5 Width Base Size

Eisco Labs 8″ x 5″ Steel Support Ring Stand with 3 Rings, 8″ Length x 5″ Width Base Size

Eisco Labs 8″ x 5″ Steel Support Ring Stand with 3 Rings, 8″ Length x 5″ Width Base Size - Stainless steel resists scaling and corrosion. Eisco support ring stand set is for laboratory use, and contains a 8″x5″ base, 20″ x 3/8″ dia rod, 3 suppor rings sizes ( 3″ , 4″, and 5″) the set’s rod is made of stainless steel, and it has a powder-coated base for durability.

 

Kimble 953730-0000 Vacuum Microfiltration Assembly with Utlra-Ware Stainless Steel Support 25mm Filter Size

Kimble 953730-0000 Vacuum Microfiltration Assembly with Utlra-Ware Stainless Steel Support, 25mm Filter Size

Kimble 953730-0000 Vacuum Microfiltration Assembly with Utlra-Ware Stainless Steel Support, 25mm Filter Size - Stainless steel support screen for xx4304700 polypropylene 47mm in-line pressure filter holder. Suitable for high school or college students, or ages 14 to 21. Filter holders are not autoclavable with filters in place^materials of construction borosilicate glass funnel and base removable stainless steel screen filter support anodized aluminum spring clamp silicone stopper^fitting inlet funnel filter diameter, mm 25 filtration supply type filter holders^filtration area, cm squared 25 diameter, cm (in) 25 pressure/vacuum vacuum height, cm (in) 152^fitting outlet no 5 perforated silicone stopper mounts in standard 125 ml filtering flask. Kimble, funnel/ss supp assy 25mm , ea1.

 

Chemglass CG-3051-08  Series CG-3051 Stainless Steel Support Tube 12 OD 72 Length

Chemglass CG-3051-08 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 72″ Length

Chemglass CG-3051-08 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 72″ Length - They have good surface hardness and do not score from clamp binding screws. The walls are 1/16 inch (1. 6mm) thick, strong, and do not sag. Tubes are 1/2 inch (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of the stainless steel. The ends of each tube are capped with polyethylene tight fitting end-caps. These support tubes are made of brilliant polished 304 stainless steel.

 

Stainless steel support screen  90 mm - 953810-0090 - EACH

Stainless steel support screen , 90 mm – 953810-0090 – EACH

Stainless steel support screen , 90 mm – 953810-0090 – EACH - Simply compress the scissor-like mechanism, insert burette and gently release to grip. Kimble, ss support screen 90mm , ea1. Stand includes one rod place in center of a rectangular weighted base.

 

Advantec MFS 311850 Model PFC2 PhaseFraction Collector Filtration Holder Stainless Steel Support 4035 Glass Joint 47 mm Diameter Borosilicate Glass 045 Borosilicate Glass

Advantec MFS 311850 Model P/FC2 Phase/Fraction Collector Filtration Holder, Stainless Steel Support, 40/35 Glass Joint, 47 mm Diameter, Borosilicate Glass, 0.45 Borosilicate Glass

Advantec MFS 311850 Model P/FC2 Phase/Fraction Collector Filtration Holder, Stainless Steel Support, 40/35 Glass Joint, 47 mm Diameter, Borosilicate Glass, 0.45 Borosilicate Glass - The phase/fraction collector was designed for applications that require aliquots of filtrate to be collected or contained for further analysis such as in multiphase extraction. During the filtration process the liquid can be diverted to the receiver tube by way of the 2-way, y bore ptfe valve. Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. With additional receiver tubes, multiple samples can be collected. The unique design does not require venting hazardous sample or solvents to the atmosphere.

 

Thomas Rectangular Enameled Steel Support Base 305mm Length x 153mm Width

Thomas Rectangular Enameled Steel Support Base, 305mm Length x 153mm Width

Thomas Rectangular Enameled Steel Support Base, 305mm Length x 153mm Width - Finished in hard enamel. Measures 305mm length by 153mm width. Support is furnished with 914mm rod height. Support base. With heavy, rectangular base of plate steel.

 

KGS 90 Microanalysis Filter Holder 90mm Stainless Steel Support Glass 1000 mL

KGS 90 Microanalysis Filter Holder, 90mm Stainless Steel Support, Glass, 1000 mL

KGS 90 Microanalysis Filter Holder, 90mm Stainless Steel Support, Glass, 1000 mL - Sterlitech glass filter holders are used for the filtration of small volumes for biological or particulate contamination.

 

Chemglass CG-3051-09  Series CG-3051 Stainless Steel Support Tube 12 OD 96 Length

Chemglass CG-3051-09 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 96″ Length

Chemglass CG-3051-09 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 96″ Length - The ends of each tube are capped with polyethylene tight fitting end-caps. Tubes are 1/2 inch (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of the stainless steel. These support tubes are made of brilliant polished 304 stainless steel. The walls are 1/16 inch (1. 6mm) thick, strong, and do not sag. They have good surface hardness and do not score from clamp binding screws.

 

Chemglass CG-1948-L-10 Steel Support Ring with Opening Small 44mm ID 210mm L

Chemglass CG-1948-L-10 Steel Support Ring with Opening, Small, 44mm ID, 210mm L

Chemglass CG-1948-L-10 Steel Support Ring with Opening, Small, 44mm ID, 210mm L - Manufactured from steel wire and zinc plated, rings have an opening to permit items such as separatory funnels to be inserted without removing the support ring from the base.

 

Advantec MFS 311320 Model GFA25 Microanalysis Filter Holder for 15 mL and 250 mL Funnel Stainless Steel Support 25 mm Diameter Borosilicate Glass

Advantec MFS 311320 Model GFA25 Microanalysis Filter Holder for 15 mL and 250 mL Funnel, Stainless Steel Support, 25 mm Diameter, Borosilicate Glass

Advantec MFS 311320 Model GFA25 Microanalysis Filter Holder for 15 mL and 250 mL Funnel, Stainless Steel Support, 25 mm Diameter, Borosilicate Glass - 5 silicone stopper mounts in a standard 125ml vacuum filter flask. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ ptfe gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures particles will not be shed into the filtrate. Borosilicate glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. Available in three graduated funnel capacities 15, 150, or 300 ml. The no. The holder utilizes a 25mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel and base.

 

Chemglass CG-3051-06  Series CG-3051 Stainless Steel Support Tube 12 OD 48 Length

Chemglass CG-3051-06 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 48″ Length

Chemglass CG-3051-06 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 48″ Length - The ends of each tube are capped with polyethylene tight fitting end-caps. The walls are 1/16 inch (1. 6mm) thick, strong, and do not sag. Tubes are 1/2 inch (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of the stainless steel. These support tubes are made of brilliant polished 304 stainless steel. They have good surface hardness and do not score from clamp binding screws.

 

American Educational Stamped Steel Support Ring Stand with 3 Rings 8 Length x 5 Width Base Size

American Educational Stamped Steel Support Ring Stand with 3 Rings, 8″ Length x 5″ Width Base Size

American Educational Stamped Steel Support Ring Stand with 3 Rings, 8″ Length x 5″ Width Base Size - Three rings 3″, 4″ and 5″. Type is coated with an acid resistant finish. Base size 8″ length by 5″ width, rod size 3/8″ diameter by 20″ length. Strong and dependable support. The rods are nickel plated steel and are threaded to fit the base. Available in stamped steel.

 

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish 11 Length x 6 Width Base Size

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish, 11″ Length x 6″ Width Base Size

American Educational Stamped Steel Support Ring Stand with Acid Resistant Finish, 11″ Length x 6″ Width Base Size - Available in stamped steel. Type is coated with an acid resistant finish. Base size 11″ length by 6″ width, rod size 1/2″ diameter by 36″ length. The rods are nickel plated steel and are threaded to fit the base. Strong and dependable support.

 

Chemglass CG-1948-L-11 Steel Support Ring with Opening Medium 64mm ID 220mm L

Chemglass CG-1948-L-11 Steel Support Ring with Opening, Medium, 64mm ID, 220mm L

Chemglass CG-1948-L-11 Steel Support Ring with Opening, Medium, 64mm ID, 220mm L - Filter holders are not autoclavable with filters in place^materials of construction borosilicate glass funnel and base removable stainless steel screen filter support anodized aluminum spring clamp silicone stopper^fitting inlet funnel filter diameter, mm 25 filtration supply type filter holders^filtration area, cm squared 25 diameter, cm (in) 25 pressure/vacuum vacuum height, cm (in) 152^fitting outlet no 5 perforated silicone stopper mounts in standard 125 ml filtering flask. Stainless steel support screen for xx4304700 polypropylene 47mm in-line pressure filter holder. Stainless steel rod with powder-coated base for durability. Suitable for high school or college students, or ages 14 to 21.

 

Chemglass CG-3051-03  Series CG-3051 Stainless Steel Support Tube 12 OD 18 Length

Chemglass CG-3051-03 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 18″ Length

Chemglass CG-3051-03 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 18″ Length - The ends of each tube are capped with polyethylene tight fitting end-caps. They have good surface hardness and do not score from clamp binding screws. The walls are 1/16 inch (1. These support tubes are made of brilliant polished 304 stainless steel. 6mm) thick, strong, and do not sag. Tubes are 1/2 inch (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of the stainless steel.

 

Millipore XX1002530 Glass Microanalysis Filter Holder with Stainless Steel Support 25mm Diameter

Millipore XX1002530 Glass Microanalysis Filter Holder with Stainless Steel Support, 25mm Diameter

Millipore XX1002530 Glass Microanalysis Filter Holder with Stainless Steel Support, 25mm Diameter - Stainless steel support screen for xx4304700 polypropylene 47mm in-line pressure filter holder. Suitable for high school or college students, or ages 14 to 21. Stainless steel rod with powder-coated base for durability. Filter holders are not autoclavable with filters in place^materials of construction borosilicate glass funnel and base removable stainless steel screen filter support anodized aluminum spring clamp silicone stopper^fitting inlet funnel filter diameter, mm 25 filtration supply type filter holders^filtration area, cm squared 25 diameter, cm (in) 25 pressure/vacuum vacuum height, cm (in) 152^fitting outlet no 5 perforated silicone stopper mounts in standard 125 ml filtering flask.

 

Bel-Art F18391-0002 Stainless Steel Vertical Support Rod for Poly-Jaque Plastic Lab Jack F18391-0001

Bel-Art F18391-0002 Stainless Steel Vertical Support Rod for Poly-Jaque Plastic Lab Jack F18391-0001

Bel-Art F18391-0002 Stainless Steel Vertical Support Rod for Poly-Jaque Plastic Lab Jack F18391-0001 - The rod diameter is 79 mm (5/16″) and is supplied with two hex nuts for secure attachment to the jack top plate. This metal rod is electrically conductive. This 46 cm (18″) long stainless steel support rod attaches to the top plate of the poly-jaque lab jack to allow attachment of various clamps and other accessories.

 

Cole-Parmer AO-08129-83 Stainless Steel Support Stand Stabilizer Knobs Pack of 2

Cole-Parmer AO-08129-83 Stainless Steel Support Stand Stabilizer Knobs (Pack of 2)

Cole-Parmer AO-08129-83 Stainless Steel Support Stand Stabilizer Knobs (Pack of 2) - Cole-parmer brand products. Manufactured by cole-parmer. Cole-parmer stainless steel support stand stabilizer knobs. Lab equipment & instruments.

 

Talboys 916349 Stainless Steel Support Stand with Rod

Talboys 916349, Stainless Steel Support Stand with Rod

Talboys 916349, Stainless Steel Support Stand with Rod - Stainless steel support stand with rod stainless steel electro-polished finish or nickel-plated zinc double buret clamp holds any size buret from micro to 100ml capacity. Numbers and graduation on buret remain easy to read. Stainless steel or aluminum support rod attaches to optional porcelain base. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Double buret clamp unit attaches to optional standard support rod with built-reinforced hook connector. For height adjustments, recompress mechanism and slide buret up or down and gently release. Adjusting nut faces forward for easy use.

 

Chemglass CG-3051-07  Series CG-3051 Stainless Steel Support Tube 12 OD 60 Length

Chemglass CG-3051-07 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 60″ Length

Chemglass CG-3051-07 Series CG-3051 Stainless Steel Support Tube, 1/2″ OD, 60″ Length - The ends of each tube are capped with polyethylene tight fitting end-caps. The walls are 1/16 inch (1. Tubes are 1/2 inch (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of the stainless steel. They have good surface hardness and do not score from clamp binding screws. These support tubes are made of brilliant polished 304 stainless steel. 6mm) thick, strong, and do not sag.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.