Top 15 Talboys for 2019

 

Talboys 954002 Stainless Steel Staining Rack 2374 Length x 35 Width

Talboys 954002 Stainless Steel Staining Rack, 23.74″ Length x 3.5″ Width

Talboys 954002 Stainless Steel Staining Rack, 23.74″ Length x 3.5″ Width - Constructed of stainless steel, the talboys slide staining rack will resist corrosion under normal use. Adjustable to fit trays or sinks up to 21″ inside.

 

Talboys 152L Propeller Shaft 35 Blade Diameter 516 Shaft Diameter x 18 Shaft Length Stainless Steel

Talboys 152L Propeller Shaft, 3.5″ Blade Diameter, 5/16″ Shaft Diameter x 18″ Shaft Length, Stainless Steel

Talboys 152L Propeller Shaft, 3.5″ Blade Diameter, 5/16″ Shaft Diameter x 18″ Shaft Length, Stainless Steel - 15 degree pitched blades. Axial flow. Various shaft lengths and diameters with permanent 2″ or 35″ 3-blade propeller for every mixing need. All stainless steel 303/304 construction.

 

Talboys 916358 Stainless Steel Hook Connector for Labjaws Clamp Electro-Polished Finish 0-13mm Grip Size

Talboys 916358 Stainless Steel Hook Connector for Labjaws Clamp, Electro-Polished Finish, 0-13mm Grip Size

Talboys 916358 Stainless Steel Hook Connector for Labjaws Clamp, Electro-Polished Finish, 0-13mm Grip Size - Stainless steel electro-polished finish construction. Simple, versatile, and easy-to-use. Hook connectors allow one-handed assembly of two components with one adjustment screw.

 

Talboys 152 Propeller Shaft 35 Blade Diameter 516 Shaft Diameter x 12 Shaft Length Stainless Steel

Talboys 152 Propeller Shaft, 3.5″ Blade Diameter, 5/16″ Shaft Diameter x 12″ Shaft Length, Stainless Steel

Talboys 152 Propeller Shaft, 3.5″ Blade Diameter, 5/16″ Shaft Diameter x 12″ Shaft Length, Stainless Steel - All stainless steel 303/304 construction. Various shaft lengths and diameters with permanent 2″ or 35″ 3-blade propeller for every mixing need. 15 degree pitched blades. Axial flow.

 

Talboys 712 Aluminum Heavy-Duty Cylinder Bench Clamp with Strap 325 Length x 6 Width x 45 Height

Talboys 712 Aluminum Heavy-Duty Cylinder Bench Clamp with Strap, 3.25″ Length x 6″ Width x 4.5″ Height

Talboys 712 Aluminum Heavy-Duty Cylinder Bench Clamp with Strap, 3.25″ Length x 6″ Width x 4.5″ Height - This clamp is not available with a safety message strap. 5″ thick. Rugged cast aluminumbench clamp features a 1″ wide,54″ long nylon strap with nickelplated, non-slip spring catch buckle to hold cylinders from 4 to 14″ diameter. 25″ overhang. This bench clamp has two screw clamps to tighten for extra firm mounting to any flat surface up to 1. Especially convenient for temporary storage situations. 75″ thick with a 1. The 1″ wide, 54″ long nylon strap features a nickel-plated,non-slip spring catch and buckle for easy adjustment around cylinders from 4 to 14″ diameter. Rugged cast aluminum clamps safely secure gas cylinders to benches, tables or other flat surfaces up to 2.

 

Talboys 980096 Rubber Mat 24 x 24 Size For Shaker

Talboys 980096 Rubber Mat, 24″ x 24″ Size, For Shaker

Talboys 980096 Rubber Mat, 24″ x 24″ Size, For Shaker - 24 x 24 (61 x 61cm) rubber mat for use with shaker models advanced 10000-1/10000-2.

 

Talboys 984TA5AASTUS Polymer Basic Mini Auto-Stirrer 100 - 1200 rpm 120V

Talboys 984TA5AASTUS Polymer Basic Mini Auto-Stirrer, 100 – 1200 rpm, 120V

Talboys 984TA5AASTUS Polymer Basic Mini Auto-Stirrer, 100 – 1200 rpm, 120V - Powerful motor and magnet deliver reliable and consistent stirring. Basic mini auto-stirrer is automatically activated by the minimum weight of ~50 grams (1. Durable, cast aluminum top plate will not crack or chip, and provides an even heating surface. Talboys basic mini hotplates, stirrers, and hotplate-stirrers are rugged, compact units that heat and stir up to 1000ml of liquid. Compact design saves bench space. Built in support rod holder with locking knob accepts optional support rod and clamp kit. Powerful heater reaches maximum temperature in only minutes. Operating features adjustment knobs basic speed and temperature control knob with dial markings from 1 to 10. Bi-metallic thermostat offers reliable temperature control. 75oz) and will stop stirring when mixing vessel is removed.

 

Talboys 949142 Anodized Aluminum Vial Single Block 20 Well 127mm Well Diameter 375 Length x 3 Width x 2 Height For 12mm Vial

Talboys 949142 Anodized Aluminum Vial Single Block, 20 Well, 12.7mm Well Diameter, 3.75″ Length x 3″ Width x 2″ Height, For 12mm Vial

Talboys 949142 Anodized Aluminum Vial Single Block, 20 Well, 12.7mm Well Diameter, 3.75″ Length x 3″ Width x 2″ Height, For 12mm Vial - Caution to avoid possible electrical hazard, do not fill well or block with water or other liquids. Units are designed as a dry bath/incubator. Constructed from a solid anodized aluminum block, the close contact of tubes to block walls allow for maximum heat retention. Each block has a thermometer well for measuring block temperature.

 

Talboys 949138 Stainless Steel Shot For Stainless Steel Sand Bath

Talboys 949138 Stainless Steel Shot, For Stainless Steel Sand Bath

Talboys 949138 Stainless Steel Shot, For Stainless Steel Sand Bath - Radial flow. Mixes the contents of narrow-mouthed vessels. Complements all stirrers designed to accept 1/4″ (64mm) diameter shafts. Equipped as a swivel blade attached to a shaft shaft diameter and length vary. The blade measures 2″ width by 1/2″ height (51mm x 13 mm).

 

Talboys 916129 Nickel-Plated Zinc Large Chain Clamp 35mm-280mm Holding Size 206mm Overall Length

Talboys 916129 Nickel-Plated Zinc Large Chain Clamp, 35mm-280mm Holding Size, 206mm Overall Length

Talboys 916129 Nickel-Plated Zinc Large Chain Clamp, 35mm-280mm Holding Size, 206mm Overall Length - Made of nickel-plated zinc with a chrome brass chain for corrosion resistance. Chain clamp for securing round or irregular objects to a lab frame, rod, or other apparatus. 127mm (5″) long extension arm allows the clamp to be set at varying distances from a frame or rod. Slip-on chain connection and an adjusting knob for a firm hold. Grip range is 35 to 280mm (138″ to 1102″) in diameter.

 

Talboys 980097 Rubber Mat 24 x 36 Size For Shaker

Talboys 980097 Rubber Mat, 24″ x 36″ Size, For Shaker

Talboys 980097 Rubber Mat, 24″ x 36″ Size, For Shaker - It provides the highest quality for maximum strength and durability. Chamfered ends for easy location and smooth fit. All rods are corrosion-resistant. Used on advanced 15000-1 / 15000-2 shakers. High-quality offerings are designed for durability.

 

Talboys 980082 Flask Clamp Stainless Steel For 250mL Erlenmeyer Flask

Talboys 980082 Flask Clamp, Stainless Steel, For 250mL Erlenmeyer Flask

Talboys 980082 Flask Clamp, Stainless Steel, For 250mL Erlenmeyer Flask - Flask clamps 125ml and higher are supplied with a spring to hold flask in place. Includes hardware for easy attachment to platforms. Designed to hold erlenmeyer flasks from 250ml.

 

Talboys 110-36 303 Stainless Steel Labjaws Support Stand with 36 Rod

Talboys 110-36 303 Stainless Steel Labjaws Support Stand with 36″ Rod

Talboys 110-36 303 Stainless Steel Labjaws Support Stand with 36″ Rod - Made entirely of 303 stainless steel. Base area is 1775″ (451cm) across x 105″ (267cm) deep overall. The stainless steel support rod is 5/8″ (159mm) in diameter and is screwed to the support base. Durable base can accommodate vessels up to 18″ (457cm) in diameter within the “u”. Two additional threaded holes in the base legs accommodate rods, enabling the stand to support two mixers.

 

Talboys 916132 Nickel Plated Zinc Labjaws Lab-Frame Foot 275 Diameter x 125 Height

Talboys 916132 Nickel Plated Zinc Labjaws Lab-Frame Foot, 2.75″ Diameter x 1.25″ Height

Talboys 916132 Nickel Plated Zinc Labjaws Lab-Frame Foot, 2.75″ Diameter x 1.25″ Height - Nickel plated zinc construction. Spilled fluids roll right off the smooth body contour, minimizing contamination and easing clean-ups. 75″ (19mm) mounting screws. Strong, durable lab-frame foot is designed for mounting lab-frames permanently to bench tops, fume hoods, walls, and floors. Features a set screw and includes three 0.

 

Talboys 115 Adjusta-Speed Control For Mixers

Talboys 115 Adjusta-Speed Control, For Mixers

Talboys 115 Adjusta-Speed Control, For Mixers - Ideal for use with models 105, 103x, 104x, and 107. Solid state, electronic, voltage control varies speed steplessly over the motor’s range. Excellent upgrade for units with no speed control.