Top 15 for Best Retort Stand in 2019

 

LEMO Mini Retort Stands Support Clamp Flask Laboratory Stand Set High Height 30CM TO301

LEMO Mini Retort Stands Support Clamp Flask Laboratory Stand Set High Height 30CM TO301

LEMO Mini Retort Stands Support Clamp Flask Laboratory Stand Set High Height 30CM TO301 - Application it is suitable for the use of schools, factories, scientific research units, families, hospitals, laboratories, laboratory. Stand size 150 x 80 x 4mm. Composion base,iron rod,flask holder,siderosphere(with fixing clip). Package include 1 x lab retort stand. Commonly used in filtration, heating experiment is one of the most widely used instruments in experiments.

 

PUL FACTORY Laboratory Support Stand with 2 Holes for Retort Rod 200 x 125mm Base 60cm Rod

PUL FACTORY Laboratory Support Stand with 2 Holes for Retort Rod, 200 x 125mm Base, 60cm Rod

PUL FACTORY Laboratory Support Stand with 2 Holes for Retort Rod, 200 x 125mm Base, 60cm Rod - 6 inch) rod diameter10mm it is cast iron and painted blue with 2 holes for retort rod. Pul factory rectangular laboratory retort stand basebase size 200x125mm(8×5 inch)rod length 60cm (23.

 

Retort Stand base 6 x 4 150mm x 100mm height 20 500mm

Retort Stand base: 6″ x 4″ (150mm x 100mm); height: 20″ (500mm)

Retort Stand base: 6″ x 4″ (150mm x 100mm); height: 20″ (500mm) - Wide base offers a sturdy setup for your experiments. A laboratory essential use specialized clamps and rings to support pipettes, burettes, test tubes, thermometers, condensers, flasks, funnels and other scientific equipment.

 

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder 4 Pcs

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder 4 Pcs

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder 4 Pcs - Malab lab clamp holder 2 boss heads retort stand holder 4 pcscondition 100% brand new and high quality material cast iron diameter this holder can hold 0-16mmlength150mmweight 200 g package content 4 x lab clamp holderuse to hold a clamp in labs.

 

Sciencent Retort Stand 3 Support Ring set Premium Lab Metalware Equipment

Sciencent Retort Stand 3 Support Ring set. Premium Lab Metalware Equipment

Sciencent Retort Stand 3 Support Ring set. Premium Lab Metalware Equipment - Powder coated polished royal blue base measures 8″x5″ (lxw). Padded base prevents scratches on the surface and maintains a much required grip during experiments. Polished stainless steel corrosion resistant rod measures 24″. Set contains 3 support rings for lab experiments with diameter 3″ 4″ 5″. The rod comes with a a loose & small grip lever to properly screw it in the base.

 

MALAB Lab Clamp Holder Retort Stand Holder Strong Plastic 1 Pcs

MALAB Lab Clamp Holder Retort Stand Holder Strong Plastic 1 Pcs

MALAB Lab Clamp Holder Retort Stand Holder Strong Plastic 1 Pcs - Malab lab clamp holder retort stand holder strong plastic 1 pcscondition 100% brand new and high quality material strong plastic diameter this holder can hold 0-19mmlength150mmweight 100 g package content 1 x lab clamp holderuse to hold a clamp in labs.

 

Base Retort Stand - A-Frame - 10x11 - Cast Iron - w Leveling Screws - Eisco Labs

Base Retort Stand – A-Frame – 10×11″ – Cast Iron – w/ Leveling Screws – Eisco Labs

Base Retort Stand – A-Frame – 10×11″ – Cast Iron – w/ Leveling Screws – Eisco Labs - 5″ width and comes complete with leveling screws on the feet. This heavy duty cast iron base retort stand weighs in at just under 8 lbs and will withstand the harshest lab applications while providing decades of stability to all of your valuable labware. It has a tapped 10×1. It has 10″ legs and an 11. 5mm metric thread hole and a slick black finish.

 

Cast Iron Base Retort Stand - Heavy Duty - 8x5 - Eisco Labs

Cast Iron Base Retort Stand – Heavy Duty – 8×5″ – Eisco Labs

Cast Iron Base Retort Stand – Heavy Duty – 8×5″ – Eisco Labs - It is remarkably heavy duty and has a single 10×1. 5mm metric threading. Eisco labs premium base offering is built of rugged powder coated cast iron and is chemical resistant. The unit measures 8×5″ and has a stable foundation comprised of 4 raised corners.

 

JLab Retort Stand 8X5X24

JLab Retort Stand 8X5X24

JLab Retort Stand 8X5X24 - A retort stand, sometimes called a ring stand, is a piece of scientific equipment, to which clamps can be attached to hold test tubes and other equipment such as burettes which are most often used in titration experiments.

 

Sciencent Retort Stand with Clamp and Retort Ring Set Premium Lab Metalware Equipment

Sciencent Retort Stand with Clamp and Retort Ring Set. Premium Lab Metalware Equipment

Sciencent Retort Stand with Clamp and Retort Ring Set. Premium Lab Metalware Equipment - Polished stainless steel corrosion resistant rod measures 24″. The rod comes with a a loose & small grip lever to properly screw it in the base. Powder coated polished royal blue base measures 8″x5″ (lxw). Padded base prevents scratches on the surface and maintains a much required grip during experiments. Set contains clamp and retort ring for lab experiments.

 

Eisco Labs Metal Retort Stand Base approximately 8 x 5 approx 20 x 125cm

Eisco Labs Metal Retort Stand Base, approximately 8″ x 5″ (approx. 20 x 12.5cm)

Eisco Labs Metal Retort Stand Base, approximately 8″ x 5″ (approx. 20 x 12.5cm) - Rubber strips on feet protect standing surface. Retort stand base measuring approximately 8″ x 5″. Threaded opening can hold equipment approximately 05″ in diameter. Base is coated in epoxy to protect it from chemicals. Metal base is sturdy and can secure heavy stand loads.

 

Metal Retort Stand Base 65 x 4 16x10cm Eisco Labs Premium Metalware

Metal Retort Stand Base, 6.5″ x 4″ (16x10cm) Eisco Labs Premium Metalware

Metal Retort Stand Base, 6.5″ x 4″ (16x10cm) Eisco Labs Premium Metalware - Threaded opening can hold equipment approximately 6/16″ in diameter. Metal base is sturdy and can secure heavy stand loads. Rubber strips on feet protect standing surface. Retort stand base measuring approximately 65″ x 4″. Base is coated in epoxy to protect it from chemicals.

 

Vee Gee Scientific 2011BK-25 Burette Kit with Retort Stand Two 25 mL Class A Burets and One White Finish Burette Clamp Pack of 3

Vee Gee Scientific 2011BK-25 Burette Kit with Retort Stand, Two 25 mL Class A Burets and One White Finish Burette Clamp (Pack of 3)

Vee Gee Scientific 2011BK-25 Burette Kit with Retort Stand, Two 25 mL Class A Burets and One White Finish Burette Clamp (Pack of 3) - Set of three vee gee burette products including two class a burets of borosilicate glass and ptfe stopcock, burette retort stand with non corrosive polystyrene base and polypropylene covered metallic rod and white finish double burette clamp.

 

Retort Stand base 8 x 5 200mm x 125mm height 24 600mm

Retort Stand base: 8″ x 5″ (200mm x 125mm); height: 24″ (600mm)

Retort Stand base: 8″ x 5″ (200mm x 125mm); height: 24″ (600mm) - Wide base offers a sturdy setup for your experiments. A laboratory essential use specialized clamps and rings to support pipettes, burettes, test tubes, thermometers, condensers, flasks, funnels and other scientific equipment.

 

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder Cast Iron 2 Pcs

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder Cast Iron 2 Pcs

MALAB Lab Clamp Holder 2 Boss Heads Retort Stand Holder Cast Iron 2 Pcs - Malab lab clamp holder 2 boss heads retort stand holder cast iron 2 pcscondition 100% brand new and high quality material cast iron diameter this holder can hold 0-16mmlength150mmweight 130 g package content 2 x lab clamp holderuse to hold a clamp in labs.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.