Coolest 24 Labnet Internationals

 

Labnet International E1007-AD Labnet Power Supply Adapter 4 mm to 4 mm Pack of 2

Labnet International E1007-AD Labnet Power Supply Adapter, 4 mm to 4 mm (Pack of 2)

Labnet International E1007-AD Labnet Power Supply Adapter, 4 mm to 4 mm (Pack of 2) - Control, set voltage, amperage and time. Power, 150v/400ma. Convenience, casting set and combs included. Throughput, up to 112 samples at once. Flexibility, runs 6x6cm to 125x12cm gels.

 

Labnet International - ENDURO 1510 Horizontal Gel Box

Labnet International – ENDURO 15.10 Horizontal Gel Box

Labnet International – ENDURO 15.10 Horizontal Gel Box - 10 and 15. These units provide high resolution separation of nucleic acid fragments 100bp to 20 kbp and are excellent for screening of pcr samples or routine dna fragment analysis. 15 offer a wide degree of versatility. Two trays are available “15 x 10 cm and 15 x 15 cm ” allowing the choice of two gel lengths at the time of purchase. The 15 cm total run length allows restriction fragments or other close mw sample bands to be easily separated and identified. Maximizing comb and tray options allow up to 210 samples to be resolved per gel. The enduro 15. Speed loading is accomplished using 10, 14, 16, 18, 28 or 30 sample multi-channel pipette compatible combs.

 

Labnet International E0500 Labnet Enduro Power Supply 500V 120V

Labnet International E0500 Labnet Enduro Power Supply, 500V, 120V

Labnet International E0500 Labnet Enduro Power Supply, 500V, 120V - 5 liter stirring capacity. Maximum hot temperature surface 380°c. Low profile design with 7″x7″ top plate. Labnet, fastpette pipette controller , ea1.

 

Labnet International I-4000-J Labnet AccuTherm Block J for Vortex Incubator 96 Well ELISA Plate

Labnet International I-4000-J Labnet AccuTherm Block J for Vortex Incubator, 96 Well ELISA Plate

Labnet International I-4000-J Labnet AccuTherm Block J for Vortex Incubator, 96 Well ELISA Plate - Labnet 10x8x4 accutherm shaking incubator accessory block, j, 96 well elisa plate i-4000-j.

 

Labnet International I-2041-125 Labnet Plastic Flask Clamp 125 mL

Labnet International I-2041-125 Labnet Plastic Flask Clamp, 125 mL

Labnet International I-2041-125 Labnet Plastic Flask Clamp, 125 mL - 5 liter stirring capacity. Low profile design with 7″x7″ top plate. Maximum hot temperature surface 380°c. Precise control of temperature and stirring speeds.

 

Labnet International - 12 well MC comb for use with 7cm gel system 15mm thick

Labnet International – 12 well MC comb for use with 7cm gel system, 1.5mm thick

Labnet International – 12 well MC comb for use with 7cm gel system, 1.5mm thick - Dual display. Molded block chamber. Usb connectivity enables traceability of data. Single, dual and four block capacity. Comb for labnet enduro gel boxes.

 

Labnet International - ENDURO Modular Vertical Gel System for PAGE

Labnet International – ENDURO Modular Vertical Gel System for PAGE

Labnet International – ENDURO Modular Vertical Gel System for PAGE - The modular design includes a common buffer tank that holds specialized inserts for polyacrylamide gel electrophoresis (page), electroblotting (western blots), and 2d gel electrophoresis. The coiled electrodes generate a high intensity current so that your transfers will be complete in about an hour. The page insert comes with all the components required for you to pour your own polyacrylamide protein gels, allowing you to control the gel thickness, sample capacity, and acrylamide percentage for optimal separation of your samples. Or save time by using precast gels for convenience and consistent results, the enduro modular vertical gel system is compatible with most brands of commercially available gels, including nusep, bio-rad, invitrogen, and cambrex. For western blots, use the electroblotting insert to transfer up to 3 gels simultaneously. Prepare your transfers as usual by sandwiching your polyacrylamide gels and membrane supports in the provided fiber pads and cassettes, then place the cassettes in the buffer tank with the electroblotting insert to start your run. Set-up takes place directly in the page insert, with a pressure bar to hold the plates in place, so that you can easily transfer your gels from the casting stand to the buffer tank once polymerization is complete. By stacking the plates, the page insert can accommodate up to 4 gels at once to maximize efficiency. Save money by purchasing just the parts you need, or buy the complete set for less than the cost of each individual component alone. With this system, pouring your own polyacrylamide gels is hassle-free. The labnet enduro modular vertical gel system has everything you need to run and transfer your protein gels, all in a single piece of lab equipment.

 

Labnet International - 96 well tissue-culture treated sterile wlid white plate with clear bottom 100CS

Labnet International – 96 well, tissue-culture treated, sterile, w/lid, white plate with clear bottom 100/CS

Labnet International – 96 well, tissue-culture treated, sterile, w/lid, white plate with clear bottom 100/CS - Flat wells maximize light transmission cell-culture treated for cell-based assays clear-bottom plates have a unique thin polystyrene bottom”permit direct microscopic viewing and ccd camera-based detections. Polystyrene plates meet the sbs standard for external dimensions”ensure compatibility with microplate and automation equipment.

 

Labnet International - Large comb set 1428 teeth reversible pk of 2

Labnet International – Large comb set, 14/28 teeth, reversible, pk of 2

Labnet International – Large comb set, 14/28 teeth, reversible, pk of 2 - Large comb set, 14/28 teeth, reversible, pk of 2. Comb for labnet enduro gel boxes. Dual display. Single, dual and four block capacity. Usb connectivity enables traceability of data.

 

Labnet International - 1L flask clamp for Labnet shaking incubators

Labnet International – 1L flask clamp for Labnet shaking incubators

Labnet International – 1L flask clamp for Labnet shaking incubators - 1l flask clamp for labnet shaking incubators. Standard casting set, includes 1 large and 2 small gel trays, 4 large combs and a casting stand.

 

Labnet International - BioPette Plus Four Pack Starter Kit by Labnet

Labnet International – BioPette Plus Four Pack Starter Kit by Labnet

Labnet International – BioPette Plus Four Pack Starter Kit by Labnet -   The starter kit includes the following products  0. 5 to 10µl 2.   Volume may be adjusted either by rotating the plunger or turning the barrel.   The entire pipette is autoclavable for convenient clean up after an “oops moment. To unlock, lower the collar. 0 to 20µl 20 to 200µl 100 to 1000µl plus a free carousel and three packs of labnet brand pipette tips. Comfortable, lightweight, exceptionally accurate, easy to use these are just some of the accolades we receive about the labnet biopette series of liquid handling instruments.   Each pipette features a simple locking mechanism to hold the volume when engaged in extended pipetting sessions. ” The generous finger hook lets the user relax their grip without fear of dropping the pipette. To lock, simply slide up the barrel collar.

 

Labnet International - Universal linear micropipette stand acrylic holds up to six pipettes

Labnet International – Universal linear micropipette stand, acrylic, holds up to six pipettes

Labnet International – Universal linear micropipette stand, acrylic, holds up to six pipettes - Made of sturdy plastic. Designed to hold all types of universal pipettes. Will support a maximum of six single channel, or four multi-channel pipettes.

 

Labnet International S2056A Labnet VorTemp 56 Shaking Incubator 115V

Labnet International S2056A Labnet VorTemp 56 Shaking Incubator, 115V

Labnet International S2056A Labnet VorTemp 56 Shaking Incubator, 115V - Temperature in the vortex 56 micro plate shaking incubator is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures in tubes and micro plates. Self diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Both platforms are supplied with the unit. Designed for simultaneous heating and mixing of small samples, the vortex 56 features interchangeable platforms for micro tubes and micro plates. The sturdy construction of the vortex 56 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise. Acceleration can be set to three different levels to protect delicate samples. A microprocessor controls all parameters including temperature and timed operation. Mechanical convection provides a uniform and stable environment within the chamber. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations. The vortex 56 may also be used in the cold room for sub-ambient applications. Shaking speed as well as acceleration rates are adjustable.

 

Labnet International E0160 Labnet ENDURO Gel XL Electrophoresis System with Gel Tank Power Supply and Standard Casting Set 120V

Labnet International E0160 Labnet ENDURO Gel XL Electrophoresis System with Gel Tank, Power Supply and Standard Casting Set, 120V

Labnet International E0160 Labnet ENDURO Gel XL Electrophoresis System with Gel Tank, Power Supply and Standard Casting Set, 120V - In addition, the lid of the gel box is vented to dissipate heat produced during electrophoresis. 5 x 12cm, 12. Reconnecting is easy-just press the two pieces together. Pressing the eject button separates the gel box and power supply. If the lid is removed while the system is operating, current is immediately shut down. Parameters are shown on the large digital display that is easily visible from a distance. A magnetic sensor allows current to flow to the electrodes only when the lid is in place. Or run two small gels or four micro gels at the same time. To aid in visualizing the gel while it is running, there is a clear window over the gel platform. The direct connection of the power supply into the gel box eliminates the need for power leads. Cassettes protect fragile electrodes from damage and allow for easy replacement. The power supply can be set to either constant voltage or constant current with automatic crossover between the two parameters. Labnet’s enduro gel xl includes all components necessary to cast and run horizontal gels gel trays, combs, casting stand, gel tank and digital power supply. The migration tank, gel trays and multichannel combs are molded for leak-proof performance and a long service life. One larger gel with multiple combs will accommodate up to 112 samples. 5 x 6 cm and 6 x 6cm. There are three different gel options for the enduro gel xl 12.

 

LABNET INTERNATIONAL C1801 Prism Mini Centrifuge 120 V

LABNET INTERNATIONAL C1801 Prism Mini Centrifuge, 120 V

LABNET INTERNATIONAL C1801 Prism Mini Centrifuge, 120 V - Reliable and easy-to-use, the prism mini centrifuge is compact and economical, allowing each workstation to be equipped with a “personal” mini centrifuge. It includes 2 quick release interchangeable rotors, which spin up to 6000 rpm’s. The electronic brake and self opening lid allow for quick deceleration to reduce handling time. The new prism mini centrifuge enhances labnet’s personal centrifuge product line by offering updated features and benefits to the well-known spectrafuge mini. The prism mini’s maintenance-free drive is remarkably quiet and the unique design allows for excellent air-flow, to protect temperature-sensitive samples. The prism mini can be used for a wide range of molecular biology separations and quick spins. The centrifuge was designed to be extremely compact with an exceptionally small footprint.

 

Labnet International D0420 Labnet AccuPlate Hotplate Stirrer 5 x 7 Ceramic Top 120V US Cord

Labnet International D0420 Labnet AccuPlate Hotplate Stirrer, 5″ x 7″ Ceramic Top, 120V, US Cord

Labnet International D0420 Labnet AccuPlate Hotplate Stirrer, 5″ x 7″ Ceramic Top, 120V, US Cord - With three models to choose from, there is an accurate hot plate and stirrer to meet your lab’s needs. The accuplate hotplate and hotplate stirrer models incorporate a powerful heating element positioned directly beneath the ceramic top plate. In addition, the ceramic plates can reach higher temperatures (rated to 550°c) than metal topped units and the white color makes it easy to view color changes in applications such as titrations. This provides optimal heat transfer to the plate and sample while minimizing heat transfer to the electronics and housing. Every unit is built for consistent performance and long term reliability. The durable cast aluminum housing and angled faceplate protect the electronics in the event of an accidental spill. The hotplate and hotplate stirrer models also feature a bright red “hot top” indicator to alert users that the ceramic top is too hot to touch – even if the heater is off, the light will remain on until the top has cooled to a safe temperature. Each accuplate is equipped with a pyroceram ceramic top plate that is extremely durable, easy to clean and is highly resistant to chemical attack. The stirrer and hotplate stirrer utilize a powerful motor drive system paired with strong permanent magnets to ensure a consistent connection to the stir bar. The control software is designed to minimize stir bar decoupling by regulating the acceleration rate of the motor. Labnet’s accuplate digital hot plates and stirrers are versatile, powerful and easy to use.

 

Labnet International - Micro casting set for four gels includes casting stand four 6 x 6 cm gel trays and two combs

Labnet International – Micro casting set for four gels, includes casting stand, four 6 x 6 cm gel trays and two combs

Labnet International – Micro casting set for four gels, includes casting stand, four 6 x 6 cm gel trays and two combs - Micro casting set for four gels, includes casting stand, four 6 x 6 cm gel trays and two combs. Carousel for labnet fixed volume pipettes.

 

Labnet International - Biopette Plus Four-Pack

Labnet International – Biopette Plus Four-Pack

Labnet International – Biopette Plus Four-Pack - 5µl to 1000µl (0. The biopette plus 4-pack starter kit also includes three racks of labnet’s new biofree pipette tips and a six position carousel stand. 5 to 10µl, 2. The biopette plus four pack starter kit is a complete liquid handling package including everything needed to get started with reproducible and accurate pipetting. 0 to 20µl, 20 to 200µl and 100 to 1000µl). Unlike many common liquid handling starter kits that include only 3 pipettes, the biopette plus 4-pack starter kit includes four pipettes covering a wide volume range from 0.

 

Labnet International - 2L flask clamp for Labnet shaking incubators

Labnet International – 2L flask clamp for Labnet shaking incubators

Labnet International – 2L flask clamp for Labnet shaking incubators - 500ml flask clamp for labnet shaking incubators. 2l flask clamp for labnet shaking incubators.

 

Labnet International - Micro gel tray set 6 x 6cm pk of 4

Labnet International – Micro gel tray set (6 x 6cm), pk of 4

Labnet International – Micro gel tray set (6 x 6cm), pk of 4 - Usb connectivity enables traceability of data. Dual display. Micro gel tray set (6 x 6cm), pk of 4. Single, dual and four block capacity. Molded block chamber.

 

Labnet International - 96 well tissue-culture treated sterile wlid black plate with clear bottom 100CS

Labnet International – 96 well, tissue-culture treated, sterile, w/lid, black plate with clear bottom 100/CS

Labnet International – 96 well, tissue-culture treated, sterile, w/lid, black plate with clear bottom 100/CS - Polystyrene plates meet the sbs standard for external dimensions”ensure compatibility with microplate and automation equipment. Flat wells maximize light transmission cell-culture treated for cell-based assays clear-bottom plates have a unique thin polystyrene bottom”permit direct microscopic viewing and ccd camera-based detections.

 

Labnet International D0400 Labnet AccuPlate Hotplate 5 x 7 Ceramic Top 120V US Cord

Labnet International D0400 Labnet AccuPlate Hotplate, 5″ x 7″ Ceramic Top, 120V, US Cord

Labnet International D0400 Labnet AccuPlate Hotplate, 5″ x 7″ Ceramic Top, 120V, US Cord - Labnet accuplate hotplates, 120v d0400.

 

Labnet International P3900-200 Labnet Labpette FX Fixed Volume Laboratory Pipette 200 µl

Labnet International P3900-200 Labnet Labpette FX Fixed Volume Laboratory Pipette, 200 µl

Labnet International P3900-200 Labnet Labpette FX Fixed Volume Laboratory Pipette, 200 µl - Manufactured from lightweight, high impact plastic, the labpette fx pipettes are extremely durable, offer excellent chemical resistance and retain their high level of accuracy and precision during repeated use. Both the shaft and tip ejector are autoclavable. An ergonomically designed body and finger rest make these fixed volume pipettes comfortable to hold, even during extended pipetting sessions. Labpette fx pipettes are color coded for easy identification and proper tip selection. The smooth plunger action and unique twist-eject tip removal system require minimal force and aid in reducing the risk of repetitive strain injuries.

 

Labnet International S0200-21 Labnet Optional Head Attachment for 24 mL x 1520 mL Tube 24 mL x 05 mL Tube and 32 mL x 02 mL Tube

Labnet International S0200-21 Labnet Optional Head Attachment for 24 mL x 1.5/2.0 mL Tube, 24 mL x 0.5 mL Tube and 32 mL x 0.2 mL Tube

Labnet International S0200-21 Labnet Optional Head Attachment for 24 mL x 1.5/2.0 mL Tube, 24 mL x 0.5 mL Tube and 32 mL x 0.2 mL Tube - Throughput, up to 112 samples at once. Convenience, casting set and combs included. Control, set voltage, amperage and time. Labnet international, inc. Power, 150v/400ma.