Coolest 17 Tough Tags in 2020

 

Diversified Biotech Tough-Tags TTLW-2016-O Laser Label 128 Length x 050 Width Orange Pack of 2125

Diversified Biotech Tough-Tags TTLW-2016-O Laser Label, 1.28″ Length x 0.50″ Width, Orange (Pack of 2125)

Diversified Biotech Tough-Tags TTLW-2016-O Laser Label, 1.28″ Length x 0.50″ Width, Orange (Pack of 2125) - Unlike conventional tape materials, these labels withstand steam-autoclaving, boiling water baths, freezer temperatures to at least -20°c, organic solvents, caustic agents, and other challenges without peeling. Microcentrifuge tubes with tough-tags wrap-around labels slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate even after boiling and autoclaving. The labels are chemically inert polyester, which strongly adhere to all plastics and other materials. Unlike paper and many other label materials, this advanced material won’t dry out, fall off, or tear. Heat-resistant stay-flat sheets won’t jam in laser printers. Specially designed label sheets are top coated to readily accept laser printing. Laser tough-tags for laser printers are pre-cut, peel off labels that are perfectly sized to fit microcentrifuge tubes and other containers in the research and clinical laboratory. Rounded corners between labels allow for easy non-stick lifting.

 

Diversified Biotech Tough-Tags TTSW-2240-Y Laser Label 094 Length x 050 Width Yellow Pack of 2975

Diversified Biotech Tough-Tags TTSW-2240-Y Laser Label, 0.94″ Length x 0.50″ Width, Yellow (Pack of 2975)

Diversified Biotech Tough-Tags TTSW-2240-Y Laser Label, 0.94″ Length x 0.50″ Width, Yellow (Pack of 2975) - Specially designed label sheets are top coated to readily accept laser printing. Unlike paper and many other label materials, this advanced material won’t dry out, fall off, or tear. The labels are chemically inert polyester, which strongly adhere to all plastics and other materials. Rounded corners between labels allow for easy non-stick lifting. Microcentrifuge tubes with tough-tags wrap-around labels slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate even after boiling and autoclaving. Unlike conventional tape materials, these labels withstand steam-autoclaving, boiling water baths, freezer temperatures to at least -20°c, organic solvents, caustic agents, and other challenges without peeling. Heat-resistant stay-flat sheets won’t jam in laser printers. Laser tough-tags for laser printers are pre-cut, peel off labels that are perfectly sized to fit microcentrifuge tubes and other containers in the research and clinical laboratory.

 

Diversified Biotech Ttlo-1000 Tough-Tags 128 X 050 Orange Roll Of 1000

Diversified Biotech Ttlo-1000, Tough-Tags 1.28″ X 0.50″ Orange (Roll Of 1000)

Diversified Biotech Ttlo-1000, Tough-Tags 1.28″ X 0.50″ Orange (Roll Of 1000) - Temperature resistant from -40°c to 121°c and withstand autoclaving, boiling water baths, freezer temperatures, solvents and caustic agents. Perfect for identifying samples. Tough-tags® are chemically inert labels that strongly adhere to microtubes, test tubes, storage boxes and microscope slides.

 

Diversified Biotech Tough-Tags THER-1225 Thermal Transfer Label 2 Length x 025 Width Roll of 2000

Diversified Biotech Tough-Tags THER-1225 Thermal Transfer Label, 2″ Length x 0.25″ Width (Roll of 2000)

Diversified Biotech Tough-Tags THER-1225 Thermal Transfer Label, 2″ Length x 0.25″ Width (Roll of 2000) - Print popular barcode formats for fast and easy sample identification. Coated for use with a resin ribbon that provides the best performance under extreme conditions. Unique solvent-resistant, acrylic-based adhesive provides excellent cold temperature performance. Resists degradation from scuffing, chemicals, moisture and wide temperature fluctuations. Rint as little as one label at a time, eliminating label waste and saving time and money.

 

Tough-Tag Labels On a Roll 33 mm x 13 mm 15 ml Tubes 1000PK

Tough-Tag Labels On a Roll 33 mm x 13 mm 1.5 ml Tubes, 1000/PK

Tough-Tag Labels On a Roll 33 mm x 13 mm 1.5 ml Tubes, 1000/PK - Tough-tags are pre-cut, peel-off labels that accept any marking instrument. 1. 28″x 0. 5 ml tubes. They are sized to fit microcentrifuge tubes and other containers in the laboratory. Ideal use 1. 50″ (33mm x 13mm).

 

Diversified Biotech Tough-Tags TTGP-1050-G Laser Label 150 Length x 075 Width Green Pack of 1500

Diversified Biotech Tough-Tags TTGP-1050-G Laser Label, 1.50″ Length x 0.75″ Width, Green (Pack of 1500)

Diversified Biotech Tough-Tags TTGP-1050-G Laser Label, 1.50″ Length x 0.75″ Width, Green (Pack of 1500) - Won’t bind centrifuge rotors. Label sheets are heat-resistant, stay-flat sheets that will not jam in laser printers. From -40°c to 121°c. Resists most organic solvents and caustic agents.

 

Diversified Biotech Ttsw-Kk-20 Laser Tough-Tags 094 X 050 Kisscut Pack Of 3200

Diversified Biotech Ttsw-Kk-20, Laser Tough-Tags 0.94″ X 0.50″ Kisscut (Pack Of 3200)

Diversified Biotech Ttsw-Kk-20, Laser Tough-Tags 0.94″ X 0.50″ Kisscut (Pack Of 3200) - Kiss-cut tough-tags® are chemically resistant, flexible, polyester labels that can withstand autoclaving, boiling water baths, freezing to -40°c, or heating up to 121°c without degrading. They adhere strongly to plastics and other materials. Tough-tags® are thin and will not bind centrifuge rotors.

 

Diversified Biotech TTLB-1000 Tough-Tags Label Use with 15ml Tube 050 Width x 128 Length Blue Roll of 1000

Diversified Biotech TTLB-1000 Tough-Tags Label, Use with 1.5ml Tube, 0.50″ Width x 1.28″ Length, Blue (Roll of 1000)

Diversified Biotech TTLB-1000 Tough-Tags Label, Use with 1.5ml Tube, 0.50″ Width x 1.28″ Length, Blue (Roll of 1000) - 5”. Dimensions small 0. Tags have strong adhesion to all plastics and other materials. 94” x 0. Microcentrifuge tube tough-tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°c, organic solvents, caustic agents and other challenges without peeling. 25” x 0. 5” large 1.

 

Diversified Biotech Tough-Tags MISL-1000 Microscope Slide Label 0875 Length x 0875 Width White Pack of 2400

Diversified Biotech Tough-Tags MISL-1000 Microscope Slide Label, 0.875″ Length x 0.875″ Width, White (Pack of 2400)

Diversified Biotech Tough-Tags MISL-1000 Microscope Slide Label, 0.875″ Length x 0.875″ Width, White (Pack of 2400) - Resists most organic solvents and caustic agents. Label sheets are heat-resistant, stay-flat sheets that will not jam in laser printers. From -40°c to 121°c. Won’t bind centrifuge rotors.

 

Diversified Biotech Tough-Tags TTGP-1050 Laser Label 150 Length x 075 Width White Pack of 1500

Diversified Biotech Tough-Tags TTGP-1050 Laser Label, 1.50″ Length x 0.75″ Width, White (Pack of 1500)

Diversified Biotech Tough-Tags TTGP-1050 Laser Label, 1.50″ Length x 0.75″ Width, White (Pack of 1500) - Scuff and smear-proof and withstand steam autoclaving. Chemical resistant. Sized to perfectly fit microcentrifuge tubes. Chemically inert polyester and temperature resistant.

 

Diversified Biotech Tough-Tags RNBW-3000 Laser Label 128 Length x 050 Width Rainbow Pack Pack of 2125

Diversified Biotech Tough-Tags RNBW-3000 Laser Label, 1.28″ Length x 0.50″ Width, Rainbow Pack (Pack of 2125)

Diversified Biotech Tough-Tags RNBW-3000 Laser Label, 1.28″ Length x 0.50″ Width, Rainbow Pack (Pack of 2125) - Unlike paper and many other label materials, this advanced material won’t dry out, fall off, or tear. Heat-resistant stay-flat sheets won’t jam in laser printers. Rounded corners between labels allow for easy non-stick lifting. Microcentrifuge tubes with tough-tags wrap-around labels slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate even after boiling and autoclaving. Specially designed label sheets are top coated to readily accept laser printing. The labels are chemically inert polyester, which strongly adhere to all plastics and other materials. Unlike conventional tape materials, these labels withstand steam-autoclaving, boiling water baths, freezer temperatures to at least -20°c, organic solvents, caustic agents, and other challenges without peeling. Laser tough-tags for laser printers are pre-cut, peel off labels that are perfectly sized to fit microcentrifuge tubes and other containers in the research and clinical laboratory.

 

Diversified Biotech TT-TNY Teeny Tough-Tags Label Use with 02ml PCR Tube 081 Length x 028 Width White Roll of 1500

Diversified Biotech TT-TNY Teeny Tough-Tags Label, Use with 0.2ml PCR Tube, 0.81″ Length x 0.28″ Width, White (Roll of 1500)

Diversified Biotech TT-TNY Teeny Tough-Tags Label, Use with 0.2ml PCR Tube, 0.81″ Length x 0.28″ Width, White (Roll of 1500) - For best adhesion it is recommended that siliconized surfaces be avoided. They are temperature resistant from 121°c to –40°c and withstand autoclaving, boiling water baths, freezer temperatures, organic solvents and caustic agents. Tough-tags are perfect for accurately identifying important samples stored in tubes, microplates or boxes that will be autoclaved or stored in moderate freezer temperatures. Tough-tags are chemically inert labels that strongly adhere to microtubes, test tubes, storage boxes and other microscope slides.

 

Tough-Tags 9187-1000 Large Labels White 125 x 05 1000RL

Tough-Tags 9187-1000 Large Labels, White, 1.25″ x 0.5″; 1000/RL

Tough-Tags 9187-1000 Large Labels, White, 1.25″ x 0.5″; 1000/RL - Labels are made of chemically inert polyester that strongly adheres to all plastics and other materials. Scuff- and smear-resistant. Available in a variety of colors to code your different applications. Pre-cut, peel off labels are the ideal size to fit micro centrifuge tubes and other laboratory containers. Teeny tag fits 0. Note do not apply to moist or siliconized tubes. Designed to withstand steam-autoclaving, boiling water baths, freezer temperatures, organic solvents, and caustic agents without peeling or falling off. Withstand temperatures as low as -20°c-80 and when used with virgin polypropylene tubes. 2-ml pcr tubes.

 

Diversified Biotech Tough-Tags LTTM-1000 Laser Teeny Label 091 Length x 032 Width White Pack of 3850

Diversified Biotech Tough-Tags LTTM-1000 Laser Teeny Label, 0.91″ Length x 0.32″ Width, White (Pack of 3850)

Diversified Biotech Tough-Tags LTTM-1000 Laser Teeny Label, 0.91″ Length x 0.32″ Width, White (Pack of 3850) - Won’t bind centrifuge rotors. Resists most organic solvents and caustic agents. From -40°c to 121°c. Label sheets are heat-resistant, stay-flat sheets that will not jam in laser printers.

 

Diversified Biotech Tough-Tags COLR-1000 Color Coded Dual Label for Use with 15ml Tubes 125 Length x 05625 Width with 044 Spot Red Roll of 500

Diversified Biotech Tough-Tags COLR-1000 Color Coded Dual Label for Use with 1.5ml Tubes, 1.25″ Length x 0.5625″ Width with 0.44″ Spot, Red (Roll of 500)

Diversified Biotech Tough-Tags COLR-1000 Color Coded Dual Label for Use with 1.5ml Tubes, 1.25″ Length x 0.5625″ Width with 0.44″ Spot, Red (Roll of 500) - For best adhesion itis recommended that siliconized surfaces be avoided. They are temperature resistant from 121°c to –40°c. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. Tubes with tough-tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving. Tough-tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory.

 

Diversified Biotech Tough-Tags TTLW-2016-Y Laser Label 128 Length x 050 Width Yellow Pack of 2125

Diversified Biotech Tough-Tags TTLW-2016-Y Laser Label, 1.28″ Length x 0.50″ Width, Yellow (Pack of 2125)

Diversified Biotech Tough-Tags TTLW-2016-Y Laser Label, 1.28″ Length x 0.50″ Width, Yellow (Pack of 2125) - Rounded corners between labels allow for easy non-stick lifting. Laser tough-tags for laser printers are pre-cut, peel off labels that are perfectly sized to fit microcentrifuge tubes and other containers in the research and clinical laboratory. Specially designed label sheets are top coated to readily accept laser printing. Unlike paper and many other label materials, this advanced material won’t dry out, fall off, or tear. Microcentrifuge tubes with tough-tags wrap-around labels slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate even after boiling and autoclaving. The labels are chemically inert polyester, which strongly adhere to all plastics and other materials. Heat-resistant stay-flat sheets won’t jam in laser printers. Unlike conventional tape materials, these labels withstand steam-autoclaving, boiling water baths, freezer temperatures to at least -20°c, organic solvents, caustic agents, and other challenges without peeling.

 

Diversified Biotech Ther-1150 Thermal Tough-Tags 150 X 75 1 Core Roll Of 2000

Diversified Biotech Ther-1150, Thermal Tough-Tags 1.50″ X .75″, 1″ Core (Roll Of 2000)

Diversified Biotech Ther-1150, Thermal Tough-Tags 1.50″ X .75″, 1″ Core (Roll Of 2000) - Tough-tags are thin and will not bind centrifuge rotors. Thermal transfer tough-tags are chemically resistant, polyester labels that can withstand autoclaving, boiling water baths, freezing to -40°c, or heating up to 150°c without degrading. They adhere strongly to plastics and other materials.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.