Best Ptfe Filter out of top 22 in 2019

 

Advantec MFS PF10047MM Depth Filter Grade PF100 0009 psi Pressure Drop 10µm Pore Size 100mm Thickness 47mm Diameter PTFE Pack of 20

Advantec MFS PF10047MM Depth Filter, Grade PF100, 0.009 psi Pressure Drop, 10µm Pore Size, 1.00mm Thickness, 47mm Diameter, PTFE (Pack of 20)

Advantec MFS PF10047MM Depth Filter, Grade PF100, 0.009 psi Pressure Drop, 10µm Pore Size, 1.00mm Thickness, 47mm Diameter, PTFE (Pack of 20) - No absorbtion of acid gases. Autoclaveable. Venting type applications. Ptfe fiber filters are biologically inert and resistant to chemical attack. Collection of airborne dust particulates. Relatively durable and can be folded. Pure ptfe (polytetrafluoroethylene) fibers are sintered to create a unique depth-type filter. Applications use as a prefilter to a membrane or as a final filter. Naturally hydrophobic, the media will separate aqueous from non-aqueous phases of mixtures. Filter solvents for inks and pgmea in lcd industry. Offers high air permeability and minimal pressure drop which makes it an excellent choice for venting and gas filtration applications. Filter hot acids and strong solvents. These ptfe filters offer superior handling and minimal fiber slough-off compared to glass and quartz filters. Use for filtering samples when contamination from media must be held at critically low levels.

 

SyringeFilter PTFE013N045I Hydrophilic PTFE Filter 045 M Non-Sterile Pack of 100

SyringeFilter PTFE013N045I Hydrophilic PTFE Filter, 0.45 M, Non-Sterile (Pack of 100)

SyringeFilter PTFE013N045I Hydrophilic PTFE Filter, 0.45 M, Non-Sterile (Pack of 100) - 13mm, hydrophilic ptfe syringe filter, 0. 45 µm, 100pcs/pack (non-sterile).

 

37 mm Cassette PTFE Filters wpp support Type TF - 37mm Cassette PTFE Filters Electron Microscopy Sciences

37 mm Cassette, PTFE Filters w/pp support (Type TF) – 37mm Cassette, PTFE Filters, Electron Microscopy Sciences

37 mm Cassette, PTFE Filters w/pp support (Type TF) – 37mm Cassette, PTFE Filters, Electron Microscopy Sciences - All 37mm cassettes are individually assembled and preloaded under stringent quality assurance standards with only the finest quality membrane and support pads. All 37mm cassette housings are manufactured in house and are available in both two and three piece configurations. “. ” The 37mm air sampling cassette w/”ptfe” filters are designed to meet all niosh, osha, and epa requirement for air sampling standards.

 

Whatman 6700-7502 Polycap TF 75 PTFE Membrane Capsule Filter with SB Inlet and Outlet 60 psi Maximum Pressure 02 Micron

Whatman 6700-7502 Polycap TF 75 PTFE Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 0.2 Micron

Whatman 6700-7502 Polycap TF 75 PTFE Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 0.2 Micron - Filtration area 75mm capsule. Pore size 02µm. Fittings stepped barb for 6 to 10mm or 3/8 to 1/2 inch tubing. Applications include venting, in-line filtration, isolation, electronics, pharmaceutical, biotech, and laboratory. Designed for use with organic solvents and aggressive solutions fully autoclavable and integrity-testable for sterile applications.

 

INTEL L2A-VRGF Kinetics GS-091 14 LOW PURITY GAS STICK Tescom PTFE Filter 200 PSI Guage 31 Mounting Rail 4 SCFM

INTEL L2A-VRGF Kinetics GS-091 1/4″ LOW PURITY GAS STICK, Tescom, PTFE Filter, 200 PSI Guage, 31″ Mounting Rail 4 SCFM

INTEL L2A-VRGF Kinetics GS-091 1/4″ LOW PURITY GAS STICK, Tescom, PTFE Filter, 200 PSI Guage, 31″ Mounting Rail 4 SCFM - 100 pieces per bag. Intel l2a-vrgf kinetics gs-091 1/4″ low purity gas stick, tescom, ptfe filter, 200 psi guage, 31″ mounting rail 4 scfm. Hydrophilic ptfe filter 02 µm. Non-sterile.

 

SyringeFilter PTFE013N022I Hydrophilic PTFE Filter 02 M Non-Sterile Pack of 100

SyringeFilter PTFE013N022I Hydrophilic PTFE Filter, 0.2 M, Non-Sterile (Pack of 100)

SyringeFilter PTFE013N022I Hydrophilic PTFE Filter, 0.2 M, Non-Sterile (Pack of 100) - 13mm, hydrophilic ptfe syringe filter, 0. 2 µm, 100pcs/pack (non-sterile).

 

INTEL H2A-VRGF Kinetics GS-007 14 HIGH PURITY GAS STICK AP-Tech PTFE Filter 30-0-100PSI Guage 31 Mounting rail 01-2 SCFM

INTEL H2A-VRGF Kinetics GS-007 1/4″ HIGH PURITY GAS STICK, AP-Tech, PTFE Filter, 30″-0-100PSI Guage, 31″ Mounting rail 0.1-2 SCFM

INTEL H2A-VRGF Kinetics GS-007 1/4″ HIGH PURITY GAS STICK, AP-Tech, PTFE Filter, 30″-0-100PSI Guage, 31″ Mounting rail 0.1-2 SCFM - Intel l2a-vrgf kinetics gs-091 1/4″ low purity gas stick, tescom, ptfe filter, 200 psi guage, 31″ mounting rail 4 scfm. Intel h2a-vrgf kinetics gs-007 1/4″ high purity gas stick, ap-tech, ptfe filter, 30″-0-100psi guage, 31″ mounting rail 01-2 scfm. Hydrophilic ptfe filter 02 µm. Non-sterile.

 

mdi ITFX1001SSXX102 AseptiVent TF PTFE Filter for AirGas Filtration and Venting Application Non Sterile 34 Sanitary Flange 50 mm Size Pack of 10

mdi ITFX1001SSXX102 AseptiVent TF PTFE Filter for Air/Gas Filtration and Venting Application, Non Sterile, 3/4″ Sanitary Flange, 50 mm Size (Pack of 10)

mdi ITFX1001SSXX102 AseptiVent TF PTFE Filter for Air/Gas Filtration and Venting Application, Non Sterile, 3/4″ Sanitary Flange, 50 mm Size (Pack of 10) - Aseptivent tf disposable inline ptfe gas filters are convenient pre-fabricated devices used for sterilization of gases and as a bacterial air vent in various pharmaceutical and biopharmaceutical processes.

 

Whatman 6722-1003 In-Line Vacuum Protection Filter Capsule Molecular SievePTFE

Whatman 6722-1003 In-Line Vacuum Protection Filter Capsule, Molecular Sieve/PTFE

Whatman 6722-1003 In-Line Vacuum Protection Filter Capsule, Molecular Sieve/PTFE - The a family of molecular sieves has been considered the universal product for removal of water from various gases. Designed for in-line use with stepped barb connection for 10-12 mm id hose-generally installed on the pump inlet. This color change is easily seen through the translucent housing. The filters can be used as a backup between a cold trap and the pump to protect against vapors if the cold trap fails activated carbon is a microporous carbonaceous material that is produced from various raw materials. Designed to protect vacuum pumps and minimize harmful pump exhaust fumes combination of chemical traps and hydrophobic ptfe filter membrane ensure best protection results available in three classic chemical traps activated carbon, molecular sieve, and desiccant additional feature of a hydrophobic ptfe membrane retains 99. 1µm and aqueous aerosoles application high velocity acidic air streams. With the addition of calcium chloride, the desiccant changes from blue to pink as the limit of absorption is reached. Desiccant contains anhydrous calcium sulfate prepared from natural gypsum and impregnated with calcium chloride. The granular activated carbon is produced from lignite coal and is acid washed after steam activation. 9% of airborne particles 0. This steam activation process creates pores of molecular dimensions within the carbon particle, yielding a material with extremely high internal porosity and surface area. Molecular sieves are crystalline alkali metal aluminosilicates with a three-dimensional interconnecting network structure of silica and alumina tetrahedral. Its drying efficiency for gases is high because of its superior absorption of water. It will absorb molecules with a size of less than 4a, and exclude those larger.

 

SPL 50ml Bioreactor Tube PP Tube  HDPE Cap  PTFE Filter PS Dial SterileNon - pyrogenic Non - cytotoxic DNase RNase - freeHuman DNA - free 20 Packes of 25 tubes Sleeve 3  Box 90

SPL 50ml Bioreactor Tube (PP Tube / HDPE Cap / PTFE Filter /PS Dial), Sterile,Non – pyrogenic, Non – cytotoxic, DNase /RNase – free,Human DNA – free, (20 Packes of 25 tubes) Sleeve 3 / Box 90

SPL 50ml Bioreactor Tube (PP Tube / HDPE Cap / PTFE Filter /PS Dial), Sterile,Non – pyrogenic, Non – cytotoxic, DNase /RNase – free,Human DNA – free, (20 Packes of 25 tubes) Sleeve 3 / Box 90 - Tubes are sterilized after complete packaging to eliminate contamination. The air circultaion within the reactor can be controlled by the dial on the center of the reactor cap, providing 4 levels of ventilation. Bioreactor spl life sciences bioreactors are designed to cultivate mammalian cells and microorganism under suspension condition.

 

ProCulture Polypropylene Gas Venting Cap with 02µm PTFE Filter and Sanitary Fitting for Vertical Sidearm Flasks 50mm Filter

ProCulture Polypropylene Gas Venting Cap with 0.2µm PTFE Filter and Sanitary Fitting for Vertical Sidearm Flasks, 50mm Filter

ProCulture Polypropylene Gas Venting Cap with 0.2µm PTFE Filter and Sanitary Fitting for Vertical Sidearm Flasks, 50mm Filter - Corning, procult® gas venting cap w/ 50mm 02µm ptfe filter w/ sanitary fitting for vertical sidearm flasks, ea1. Housing polypropylene(pp) housing with light yellow ring. Connectors inlet female luer outlet male slip luer. Fluid volume up to 1~10 ml. Filter area 109 cm².

 

Syringe Filters PTFE Hydrophobic 25 mm 022 um Non Sterile 25pk by KS-Tek

Syringe Filters PTFE Hydrophobic 25 mm 0.22 um Non Sterile 25/pk by KS-Tek

Syringe Filters PTFE Hydrophobic 25 mm 0.22 um Non Sterile 25/pk by KS-Tek - It can be used for working with aggressive media such as strong acids, alcohols, bases, aromatics. Ptfe filters can also be used to prevent moisture passing through air vents.  the units are ready-to-use and allow for simple, rapid and reliable ultra-cleaning of small volume samples for hplc or gc analysis. Ptfe is a hydrophobic membrane and chemically resistant to virtually all solvents. Applicationsfiltration of organic solvent with strong chemical causticity strong acid solvent filtrationalkaline solvent filtration.

 

Whatman 2702T Polycap TF 75 PTFE Membrane Capsule Filter with FNPT Inlet and Outlet 60 psi Maximum Pressure 02 Micron Pack of 5

Whatman 2702T Polycap TF 75 PTFE Membrane Capsule Filter with FNPT Inlet and Outlet, 60 psi Maximum Pressure, 0.2 Micron (Pack of 5)

Whatman 2702T Polycap TF 75 PTFE Membrane Capsule Filter with FNPT Inlet and Outlet, 60 psi Maximum Pressure, 0.2 Micron (Pack of 5) - Filtration area 75mm capsule. Applications include venting, in-line filtration, isolation, electronics, pharmaceutical, biotech, and laboratory. Fittings 3/8 inch female national pipe thread. Pore size 02µm. Designed for use with organic solvents and aggressive solutions fully autoclavable and integrity-testable for sterile applications.

 

INTEL L4BVRGF Kinetics GS-097 12 LOW PURITY GAS STICK Tescom PTFE Filter 200 PSI Guage 31 Mounting Rail 10 SCFM

INTEL L4BVRGF Kinetics GS-097 1/2″ LOW PURITY GAS STICK, Tescom, PTFE Filter, 200 PSI Guage, 31″ Mounting Rail 10 SCFM

INTEL L4BVRGF Kinetics GS-097 1/2″ LOW PURITY GAS STICK, Tescom, PTFE Filter, 200 PSI Guage, 31″ Mounting Rail 10 SCFM - Intel l4bvrgf kinetics gs-097 1/2″ low purity gas stick, tescom, ptfe filter, 200 psi guage, 31″ mounting rail 10 scfm. Non-sterile. Intel l2a-vrgf kinetics gs-091 1/4″ low purity gas stick, tescom, ptfe filter, 200 psi guage, 31″ mounting rail 4 scfm. Hydrophilic ptfe filter 02 µm.

 

1L Polycarbonate Erlenmeyer Flask with Dip Tube with 02µm PTFE Filter MLL

1L Polycarbonate Erlenmeyer Flask with Dip Tube, with 0.2µm PTFE Filter, MLL

1L Polycarbonate Erlenmeyer Flask with Dip Tube, with 0.2µm PTFE Filter, MLL - Corning, 1l pc erlenmeyer flask w/ dip tube, w/ 02µm ptfe filter, mll, cs4. 100% integrity tested. Lightweight and self-supporting. Heat sealed. High heat stability.

 

37 mm Cassette PTFE Filters Unsupport Zylon - 37mm Cassette PTFE Filters Electron Microscopy Sciences

37 mm Cassette, PTFE Filters Unsupport, (Zylon) – 37mm Cassette, PTFE Filters, Electron Microscopy Sciences

37 mm Cassette, PTFE Filters Unsupport, (Zylon) – 37mm Cassette, PTFE Filters, Electron Microscopy Sciences - All 37mm cassette housings are manufactured in house and are available in both two and three piece configurations. ” the 37mm air sampling cassette w/”ptfe” filters are designed to meet all niosh, osha, and epa requirement for air sampling standards. “. All 37mm cassettes are individually assembled and preloaded under stringent quality assurance standards with only the finest quality membrane and support pads.

 

Whatman 1950-117 PTFE Filter Funnel Plate for Glass Microfiber Filter 70mm Diameter

Whatman 1950-117 PTFE Filter Funnel Plate for Glass Microfiber Filter, 70mm Diameter

Whatman 1950-117 PTFE Filter Funnel Plate for Glass Microfiber Filter, 70mm Diameter - Maximum working temperature 200 degree c. For quick and easy filtration, whatman 3-piece filter funnels are available with a choice of three plates. For virtually all common acids, alkalis and solvents at temperatures up to 100 degree c. Ptfe plate optional extra.

 

37 mm Cassette PTFE Filters wpp support Type TF - 37mm Cassette PTFE Filters Electron Microscopy Sciences

37 mm Cassette, PTFE Filters w/pp support (Type TF) – 37mm Cassette, PTFE Filters, Electron Microscopy Sciences

37 mm Cassette, PTFE Filters w/pp support (Type TF) – 37mm Cassette, PTFE Filters, Electron Microscopy Sciences - All 37mm cassette housings are manufactured in house and are available in both two and three piece configurations. All 37mm cassettes are individually assembled and preloaded under stringent quality assurance standards with only the finest quality membrane and support pads. “. ” The 37mm air sampling cassette w/”ptfe” filters are designed to meet all niosh, osha, and epa requirement for air sampling standards.

 

Corning Easy Grip Storage Bottle 500mL Polystyrene bottle with Closed System Tubing accessories with 02m PTFE Filter and MLL and with Diptube Sterile Pack of 4

Corning Easy Grip Storage Bottle, 500mL Polystyrene bottle with Closed System Tubing accessories with 0.2m PTFE Filter and MLL, and with Diptube, Sterile, Pack of 4

Corning Easy Grip Storage Bottle, 500mL Polystyrene bottle with Closed System Tubing accessories with 0.2m PTFE Filter and MLL, and with Diptube, Sterile, Pack of 4 - Corning easy grip storage bottle, 500ml polystyrene bottle with closed system tubing accessories with 0. 2m ptfe filter and mll, and with diptube, sterile, 1 per bag, 4 per case.

 

Whatman 1950-114 PTFE Filter Funnel Plate for Glass Microfiber Filter 47mm Diameter

Whatman 1950-114 PTFE Filter Funnel Plate for Glass Microfiber Filter, 47mm Diameter

Whatman 1950-114 PTFE Filter Funnel Plate for Glass Microfiber Filter, 47mm Diameter - Ptfe plate optional extra. For quick and easy filtration, whatman 3-piece filter funnels are available with a choice of three plates. For virtually all common acids, alkalis and solvents at temperatures up to 100 degree c. Maximum working temperature 200 degree c.

 

SyringeFilter PTFEP030N022O Hydrophobic PTFE Filter 02 M Non-Sterile Pack of 100

SyringeFilter PTFEP030N022O Hydrophobic PTFE Filter, 0.2 M, Non-Sterile (Pack of 100)

SyringeFilter PTFEP030N022O Hydrophobic PTFE Filter, 0.2 M, Non-Sterile (Pack of 100) - 2 µm, 100pcs/pack (non-sterile). 30mm, hydrophobic ptfe syringe filter, 0.

 

Whatman 6711-3601 Polycap TF 36 PTFE Membrane Capsule Filter with MNPT Inlet and SB Outlet 60 psi Maximum Pressure 01 Micron

Whatman 6711-3601 Polycap TF 36 PTFE Membrane Capsule Filter with MNPT Inlet and SB Outlet, 60 psi Maximum Pressure, 0.1 Micron

Whatman 6711-3601 Polycap TF 36 PTFE Membrane Capsule Filter with MNPT Inlet and SB Outlet, 60 psi Maximum Pressure, 0.1 Micron - The capsule filter is manufactured under very clean conditions in a class 10,000 clean room and under an iso quality system. 1/pack. Filtration area, capsule 36mm. 1 bar). 1µm. It is fully autoclavable and integrity-testable for sterile applications. The maximum pressure is 60psi (4. This whatman polycap tf 36 ptfe filter device is an excellent disposable encapsulated filters and has a 0. The hydrophobic ptfe membrane housed in a polypropylene capsule is designed for use with solvents and aggressive solutions. Fittings 1/4 inch male national pipe thread inlet stepped barb outlet for 6 to 10mm or 3/8 to 1/2 inch tubing. Whatman # 6711-3601. 1µm pore size, a male national pipe thread inlet, and a stepped barb outlet. Pore size 0.