Best Oak Ridge Centrifuge Tube out of top 20 in 2020

 

Nalgene 3119-0028 Polypropylene 28mL Oak Ridge Centrifuge Tube with Polypropylene Screw Closure Translucent Case of 10

Nalgene 3119-0028 Polypropylene 28mL Oak Ridge Centrifuge Tube with Polypropylene Screw Closure, Translucent (Case of 10)

Nalgene 3119-0028 Polypropylene 28mL Oak Ridge Centrifuge Tube with Polypropylene Screw Closure, Translucent (Case of 10) - Ppco body for greater flexibility and impact resistance than polypropylene, and for its ability to be sterilized and autoclaved, and is translucent for reduced light filtration while still allowing visual fluid monitoring. Centrifuge tube used with centrifuge equipment and for applications that require a durable container. Cylindrical shape for a wide variety of applications that require solution containment. Autoclavable for applications that require sterilization. Polypropylene screw cap secures contents to help prevent spills and evaporation.

 

Nalgene PSF Oak Ridge Centrifuge Tube 50ml Case of 100

Nalgene PSF Oak Ridge Centrifuge Tube, 50ml (Case of 100)

Nalgene PSF Oak Ridge Centrifuge Tube, 50ml (Case of 100) - Autoclavable/transparent/leakproof. 3115-0050 include pp linerless screw closures, easy to clean and provides leakproof performance under ordinary use for most spins up to 10,000 x g. Transparent, with straw-colored cast, allows easy content viewing. With round bottoms to fit high speed rotors. Can be used up to 50,000 x g in refrigerated or non-refrigerated centrifuges (must be filled to at least 80% capacity for proper performance).

 

3115-0030 - Tube with Screw Cap - Nalgene Oak Ridge Centrifuge Tubes Polysulfone Thermo Scientific - Case of 100

3115-0030 – Tube with Screw Cap – Nalgene Oak Ridge Centrifuge Tubes, Polysulfone, Thermo Scientific – Case of 100

3115-0030 – Tube with Screw Cap – Nalgene Oak Ridge Centrifuge Tubes, Polysulfone, Thermo Scientific – Case of 100 - Leakproof and autoclavable. 1030 for use as protection against bloodborne pathogens. Maximum rcf is 50,000g. Note for proper performance, fill tubes to at least 80% of the total capacity. Transparent with a yellow tint. Nominal volumes correspond to rotor tube sizes -please refer to nominal volumes when ordering tubes to fit a rotor. ” Strong plastic tubes with good resistance to corrosive bases. When autoclaving, place cap loosely on tube without engaging threads. “. Meet osha standard 29 cfr part 1910. For standard and refrigerated centrifugation of biological and chemical samples. Polypropylene screw closures. Tubes with sealing caps include a retained silicone gasket in addition to the tube and screw closure.

 

Nalgene Fluorinated Ethylene Propylene Oak Ridge Centrifuge Tube 10ml Case of 10

Nalgene Fluorinated Ethylene Propylene Oak Ridge Centrifuge Tube, 10ml (Case of 10)

Nalgene Fluorinated Ethylene Propylene Oak Ridge Centrifuge Tube, 10ml (Case of 10) - Use to 50,000 x g in refrigerated centrifuges (tubes must be filled 100% to prevent collapse). Autoclavable/biohazard/leakproof/ptfe fep. Leakproof tefzel etfe closures prevent material loss under ordinary use for most spins 10,000 x g or when spinning hazardous materials.

 

3118-0030 - Nalgene Oak Ridge Centrifuge Tubes Polycarbonate Thermo Scientific - Tube with Screw Cap - Case of 100

3118-0030 – Nalgene Oak Ridge Centrifuge Tubes, Polycarbonate, Thermo Scientific – Tube with Screw Cap – Case of 100

3118-0030 – Nalgene Oak Ridge Centrifuge Tubes, Polycarbonate, Thermo Scientific – Tube with Screw Cap – Case of 100 - Nominal volumes correspond to rotor tube sizes please refer to nominal volumes when ordering tubes to fit a rotor. Leakproof closures provide safe containment. 3138-00103118-0030 transparent autoclavable polycarbonate tubes note for proper performance, fill tubes to at least 80% of the total capacity. Polypropylene screw caps. Ordering information tubes with sealing caps include a silicone gasket in addition to the tube and screw closure. 0 for use as protection against bloodborne pathogens. Certifications meet osha standard 29 cfr part. Withstand up to 50,000g in standard and refrigerated centrifuges. Place cap loosely on tube when autoclaving, without engaging threads.

 

Nalgene Polycarbonate Oak Ridge Centrifuge Tube with Sealing Cap 50ml Capacity Case of 50

Nalgene Polycarbonate Oak Ridge Centrifuge Tube with Sealing Cap, 50ml Capacity (Case of 50)

Nalgene Polycarbonate Oak Ridge Centrifuge Tube with Sealing Cap, 50ml Capacity (Case of 50) - Come with pp sealing caps with silicone gaskets for extra leak protection when spinning >10,000 x g or spinning hazardous materials. Round bottom to fit high speed rotors. Can be used up to 50,000 x g in refrigerated or non-refrigerated centrifuges (must be filled to at least 80% capacity for proper performance). Transparent for easy viewing contents. Withstand temperatures from -135° to +135°c (-211° to +275°f).

 

3119-0028 - Nalgene Oak Ridge Centrifuge Tubes Polypropylene Copolymer Thermo Scientific - Tube with Screw Cap - Case of 100

3119-0028 – Nalgene Oak Ridge Centrifuge Tubes, Polypropylene Copolymer, Thermo Scientific – Tube with Screw Cap – Case of 100

3119-0028 – Nalgene Oak Ridge Centrifuge Tubes, Polypropylene Copolymer, Thermo Scientific – Tube with Screw Cap – Case of 100 - Greater chemical resistance than polycarbonate tubes. Certifications meets osha standard 29cfr, part. Ordering information tubes with sealing caps are supplied with polypropylene screw closure and retained silicone gasket. Nominal volumes correspond to rotor tube sizes please refer to nominal volumes when ordering tubes to fit a rotor. Nalgene3119-0028 contact-clear, leakproof polypropylene copolymer tubes allow easy examination of contents repeatedly autoclavable. 0 for use as protection against bloodborne pathogens. Tubes with screw caps are supplied with polypropylene screw closures. Can be used up to 50,000g in refrigerated centrifuges. Before autoclaving, place closure on top of container without engaging threads.

 

CELLTREAT Scientific Products 229461 Oak Ridge Centrifuge Tube 30 mL Screw Cap Bag Nonsterile 12Cs

CELLTREAT Scientific Products 229461 Oak Ridge Centrifuge Tube, 30 mL, Screw Cap, Bag, Nonsterile; 12/Cs

CELLTREAT Scientific Products 229461 Oak Ridge Centrifuge Tube, 30 mL, Screw Cap, Bag, Nonsterile; 12/Cs - Ideal for high-speed, refrigerated, or standard centrifugation featuring leak-proof screw caps, uniform wall thickness, all-polypropylene construction, and round bottoms-these tubes can withstand up to 50,000 rcf x g.

 

3119-0010 - Nalgene Oak Ridge Centrifuge Tubes Polypropylene Copolymer Thermo Scientific - Tube with Screw Cap - Case of 100

3119-0010 – Nalgene Oak Ridge Centrifuge Tubes, Polypropylene Copolymer, Thermo Scientific – Tube with Screw Cap – Case of 100

3119-0010 – Nalgene Oak Ridge Centrifuge Tubes, Polypropylene Copolymer, Thermo Scientific – Tube with Screw Cap – Case of 100 - Greater chemical resistance than polycarbonate tubes. Can be used up to 50,000g in refrigerated centrifuges. Ordering information tubes with sealing caps are supplied with polypropylene screw closure and retained silicone gasket. Nalgene3119-0010 contact-clear, leakproof polypropylene copolymer tubes allow easy examination of contents repeatedly autoclavable. 0 for use as protection against bloodborne pathogens. Before autoclaving, place closure on top of container without engaging threads. Tubes with screw caps are supplied with polypropylene screw closures. Certifications meets osha standard 29cfr, part. Nominal volumes correspond to rotor tube sizes please refer to nominal volumes when ordering tubes to fit a rotor.

 

Nalgene Fluorinated Ethylene Propylene Oak Ridge Centrifuge Tube 30ml Case of 10

Nalgene Fluorinated Ethylene Propylene Oak Ridge Centrifuge Tube, 30ml (Case of 10)

Nalgene Fluorinated Ethylene Propylene Oak Ridge Centrifuge Tube, 30ml (Case of 10) - Leakproof tefzel etfe closures prevent material loss under ordinary use for most spins 10,000 x g or when spinning hazardous materials. Use to 50,000 x g in refrigerated centrifuges (tubes must be filled 100% to prevent collapse). Withstand temperatures from 100° to 150°c (148° to 302°f) for versatility from the freezer to the autoclave and more.

 

3119-0050 - Nalgene Oak Ridge Centrifuge Tubes Polypropylene Copolymer Thermo Scientific - Tube with Screw Cap - Case of 100

3119-0050 – Nalgene Oak Ridge Centrifuge Tubes, Polypropylene Copolymer, Thermo Scientific – Tube with Screw Cap – Case of 100

3119-0050 – Nalgene Oak Ridge Centrifuge Tubes, Polypropylene Copolymer, Thermo Scientific – Tube with Screw Cap – Case of 100 - Nalgene3119-0050 contact-clear, leakproof polypropylene copolymer tubes allow easy examination of contents repeatedly autoclavable. Tubes with screw caps are supplied with polypropylene screw closures. Nominal volumes correspond to rotor tube sizes please refer to nominal volumes when ordering tubes to fit a rotor. 0 for use as protection against bloodborne pathogens. Certifications meets osha standard 29cfr, part. Before autoclaving, place closure on top of container without engaging threads. Can be used up to 50,000g in refrigerated centrifuges. Ordering information tubes with sealing caps are supplied with polypropylene screw closure and retained silicone gasket. Greater chemical resistance than polycarbonate tubes.

 

Nalgene DS3132-0020 PPSilicone Oak Ridge Centrifuge Tube Sealing Cap Assembly Fits 20mm Closure Case of 2

Nalgene DS3132-0020 PP/Silicone Oak Ridge Centrifuge Tube Sealing Cap Assembly, Fits 20mm Closure (Case of 2)

Nalgene DS3132-0020 PP/Silicone Oak Ridge Centrifuge Tube Sealing Cap Assembly, Fits 20mm Closure (Case of 2) - Offers biohazard protection leakproof autoclavable. Fits closure size 20mm. Material polypropylene screw closure with a silicone gasket. Made for use at recommended maximum speeds (10,000 x g or greater) without leakage, even when full. Recommended for spinning hazardous materials that are compatible with centrifuge tube material.

 

Nalgene 3139-0050 Polypropylene 50mL Oak Ridge Centrifuge Tube With Sealing Cap PPSilicone Gasket Translucent Pack of 10

Nalgene 3139-0050 Polypropylene 50mL Oak Ridge Centrifuge Tube With Sealing Cap, PP/Silicone Gasket, Translucent (Pack of 10)

Nalgene 3139-0050 Polypropylene 50mL Oak Ridge Centrifuge Tube With Sealing Cap, PP/Silicone Gasket, Translucent (Pack of 10) - Sealing cap closure assembly included to secure hazardous contents at speeds of 10,000 x g rcf or greater. Ppco body for greater flexibility and impact resistance than polypropylene, and for its ability to be sterilized and autoclaved, and is translucent for reduced light filtration while still allowing visual fluid monitoring. Polypropylene screw cap secures contents to help prevent spills and evaporation. Centrifuge tube used with centrifuge equipment and for applications that require a durable container. Cylindrical shape for a wide variety of applications that require solution containment.

 

CELLTREAT Scientific Products 229462 Oak Ridge Centrifuge Tube 50 mL Screw Cap Bag Nonsterile 12Cs

CELLTREAT Scientific Products 229462 Oak Ridge Centrifuge Tube, 50 mL, Screw Cap, Bag, Nonsterile; 12/Cs

CELLTREAT Scientific Products 229462 Oak Ridge Centrifuge Tube, 50 mL, Screw Cap, Bag, Nonsterile; 12/Cs - Ideal for high-speed, refrigerated, or standard centrifugation featuring leak-proof screw caps, uniform wall thickness, all-polypropylene construction, and round bottoms-these tubes can withstand up to 50,000 rcf x g.

 

Nalgene 3119-0030 Polypropylene 30mL Oak Ridge Centrifuge Tube with PP Screw Closure Pack of 10

Nalgene 3119-0030 Polypropylene 30mL Oak Ridge Centrifuge Tube with PP Screw Closure (Pack of 10)

Nalgene 3119-0030 Polypropylene 30mL Oak Ridge Centrifuge Tube with PP Screw Closure (Pack of 10) - Cylindrical shape for a wide variety of applications that require solution containment. Autoclavable for applications that require sterilization. Ppco body for greater flexibility and impact resistance than polypropylene, and for its ability to be sterilized and autoclaved, and is translucent for reduced light filtration while still allowing visual fluid monitoring. Polypropylene screw cap secures contents to help prevent spills and evaporation. Centrifuge tube used with centrifuge equipment and for applications that require a durable container.

 

Nalgene 3138-0050 Polycarbonate 50mL Oak Ridge Centrifuge Tube with Sealing Cap PPSilicone Gasket Translucent Pack of 10

Nalgene 3138-0050 Polycarbonate 50mL Oak Ridge Centrifuge Tube with Sealing Cap, PP/Silicone Gasket, Translucent (Pack of 10)

Nalgene 3138-0050 Polycarbonate 50mL Oak Ridge Centrifuge Tube with Sealing Cap, PP/Silicone Gasket, Translucent (Pack of 10) - Sealing cap closure assembly included to secure hazardous contents at speeds of 10,000 x g rcf or greater. Cylindrical shape for a wide variety of applications that require solution containment. Polycarbonate body resists oils, greases, detergents, most inorganic acids, and impact over a wide temperature range, and is translucent for reduced light filtration while still allowing visual fluid monitoring. Polypropylene screw cap with a silicone gasket secures contents to help prevent spills and evaporation. Centrifuge bottle used with centrifuge equipment and for applications that require a durable container.

 

3118-0085 - Nalgene Oak Ridge Centrifuge Tubes Polycarbonate Thermo Scientific - Tube with Screw Cap - Pack of 10

3118-0085 – Nalgene Oak Ridge Centrifuge Tubes, Polycarbonate, Thermo Scientific – Tube with Screw Cap – Pack of 10

3118-0085 – Nalgene Oak Ridge Centrifuge Tubes, Polycarbonate, Thermo Scientific – Tube with Screw Cap – Pack of 10 - 0 for use as protection against bloodborne pathogens. Transparent autoclavable polycarbonate tubes note for proper performance, fill tubes to at least 80% of the total capacity. Withstand up to 50,000g in standard and refrigerated centrifuges. Ordering information tubes with sealing caps include a silicone gasket in addition to the tube and screw closure. Place cap loosely on tube when autoclaving, without engaging threads. Leakproof closures provide safe containment. Nominal volumes correspond to rotor tube sizes please refer to nominal volumes when ordering tubes to fit a rotor. Certifications meet osha standard 29 cfr part 1910. Polypropylene screw caps.

 

Nalgene 3138-0016 Polycarbonate 16mL Oak Ridge Centrifuge Tube with Sealing Cap PPSilicone Gasket Translucent Pack of 10

Nalgene 3138-0016 Polycarbonate 16mL Oak Ridge Centrifuge Tube with Sealing Cap, PP/Silicone Gasket, Translucent (Pack of 10)

Nalgene 3138-0016 Polycarbonate 16mL Oak Ridge Centrifuge Tube with Sealing Cap, PP/Silicone Gasket, Translucent (Pack of 10) - Centrifuge bottle used with centrifuge equipment and for applications that require a durable container. Sealing cap closure assembly included to secure hazardous contents at speeds of 10,000 x g rcf or greater. Polypropylene screw cap with a silicone gasket secures contents to help prevent spills and evaporation. Cylindrical shape for a wide variety of applications that require solution containment. Polycarbonate body resists oils, greases, detergents, most inorganic acids, and impact over a wide temperature range, and is translucent for reduced light filtration while still allowing visual fluid monitoring.

 

Nalgene 3139-0030 Polypropylene 30mL Oak Ridge Centrifuge Tube With Sealing Cap PPSilicone Gasket Translucent Pack of 10

Nalgene 3139-0030 Polypropylene 30mL Oak Ridge Centrifuge Tube With Sealing Cap, PP/Silicone Gasket, Translucent (Pack of 10)

Nalgene 3139-0030 Polypropylene 30mL Oak Ridge Centrifuge Tube With Sealing Cap, PP/Silicone Gasket, Translucent (Pack of 10) - Ppco body for greater flexibility and impact resistance than polypropylene, and for its ability to be sterilized and autoclaved, and is translucent for reduced light filtration while still allowing visual fluid monitoring. Cylindrical shape for a wide variety of applications that require solution containment. Centrifuge tube used with centrifuge equipment and for applications that require a durable container. Polypropylene screw cap secures contents to help prevent spills and evaporation. Sealing cap closure assembly included to secure hazardous contents at speeds of 10,000 x g rcf or greater.

 

Celltreat 229461 Oak Ridge Style Centrifuge Tube Round Bottom Polypropylene Screw Cap Non-Sterile 30 mL Clear Pack of 12

Celltreat 229461 Oak Ridge Style Centrifuge Tube, Round Bottom, Polypropylene, Screw Cap, Non-Sterile, 30 mL, Clear (Pack of 12)

Celltreat 229461 Oak Ridge Style Centrifuge Tube, Round Bottom, Polypropylene, Screw Cap, Non-Sterile, 30 mL, Clear (Pack of 12) - Oak ridge style centrifuge tubes are reusable and autoclavable, packaged non-sterile in boxes. For proper performance, 80% of total capacity must be filled. Oak ridge style high speed tubes feature a round bottom and uniform wall thickness. Manufactured from high quality polypropylene with polypropylene screw caps for excellent chemical resistance. Tubes are economical and leak-proof for refrigerated or standard centrifugation.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.