Best Immersion Heater out of top 25 in 2019

 

Immersion Heater w Dial Controller 1000 watts 7 dia 115 VAC

Immersion Heater w/ Dial Controller, 1000 watts, 7″ dia, 115 VAC

Immersion Heater w/ Dial Controller, 1000 watts, 7″ dia, 115 VAC - Lab equipment & instruments. Manufactured by cole-parmer. Heetgrid brand products. Immersion heater w/ dial controller, 1000 watts, 7″ dia, 115 vac.

 

George Ulanet 306-6-115-1100 Heat-O-Matic Immersion Heater Long Rod  20 L Heated Area 500 watts 115 VAC

George Ulanet 306-6-115-1100 Heat-O-Matic Immersion Heater, Long Rod , 20″ L Heated Area, 500 watts, 115 VAC

George Ulanet 306-6-115-1100 Heat-O-Matic Immersion Heater, Long Rod , 20″ L Heated Area, 500 watts, 115 VAC - Heaters with dial temperature controller have a sensitivity of 1°>f when liquid is stirred. Standard plug, 230 vac models do not have a plug. Top-mounted pilot light indicates that heater is on. S. Heaters feature a plastic grip handle and a 6-ft, three-wire cord, 115 vac models have u. Choose from four styles “a” loop, “b” short rod, “c” flat, and “d” long rod which is the same as style “b” only longer.

 

Immersion heater three 304 SS rods 6L heated area 500 watts 120 VAC

Immersion heater, three 304 SS rods, 6″L heated area, 500 watts, 120 VAC

Immersion heater, three 304 SS rods, 6″L heated area, 500 watts, 120 VAC - Briskheat brand products. Lab equipment & instruments. Manufactured by cole-parmer. Immersion heater, three 304 ss rods, 6″l heated area, 500 watts, 120 vac.

 

Process Tech HXRL4414-C-22L-FR72-PT111-TEF L-Shaped Immersion Heater 4kW

Process Tech HXRL4414-C-22L-FR72-PT111-TEF L-Shaped Immersion Heater 4kW

Process Tech HXRL4414-C-22L-FR72-PT111-TEF L-Shaped Immersion Heater 4kW - Degrees f, 3/4 in npt, min immersion depth 4-1/4. New process tech hxrl4414-c-22l-fr72-pt111-tef l-shaped immersion heater 4kw. In, flange material ptfe, includes brass screw plugs. Technical specification item immersion heater, flange, 40000 w, 480/3 for use with mfr. Phase, overall length 5-1/4 in, control range 266.

 

Immersion heater short rod 55 L heated area 500 watts 115 VAC

Immersion heater, short rod, 5.5″ L heated area, 500 watts, 115 VAC

Immersion heater, short rod, 5.5″ L heated area, 500 watts, 115 VAC - 5″ l heated area, 500 watts, 115 vac. Immersion heater, short rod, 5. Manufactured by cole-parmer. Lab equipment & instruments. Heat-o-matic brand products.

 

Immersion heater flat 275 dia heated area 550 watts 115 VAC

Immersion heater, flat, 2.75″ dia. heated area, 550 watts, 115 VAC

Immersion heater, flat, 2.75″ dia. heated area, 550 watts, 115 VAC - Lab equipment & instruments. Heetgrid brand products. Immersion heater, flat, 2. Heated area, 550 watts, 115 vac. 75″ dia. Manufactured by cole-parmer.

 

George Ulanet 290-6 HeetGrid Immersion Heater with Dial Controller 1500 watts 13 dia 115 VAC

George Ulanet 290-6 HeetGrid Immersion Heater with Dial Controller, 1500 watts, 13″ dia, 115 VAC

George Ulanet 290-6 HeetGrid Immersion Heater with Dial Controller, 1500 watts, 13″ dia, 115 VAC - 6°>c) in an agitated bath. Features a coiled heating element to concentrate heat at the bottom of the vessel. Heaters include a 6-ft, three-wire cord with plug on 115 vac models no plug on 230 vac models. Heaters with dial temperature controller have a sensitivity of 1°>f (0.

 

480V 15Kw 1Ph Light Wt Oil Immersion Heater Nnb

480V 1.5Kw 1Ph Light Wt Oil Immersion Heater Nnb

480V 1.5Kw 1Ph Light Wt Oil Immersion Heater Nnb - New process tech hxrl4414-c-22l-fr72-pt111-tef l-shaped immersion heater 4kw. 480v 15kw 1ph light wt oil immersion heater nnb. Technical specification item immersion heater, flange, 40000 w, 480/3 for use with mfr. Phase, overall length 5-1/4 in, control range 266. In, flange material ptfe, includes brass screw plugs.

 

Vulcan Electric WTP-906 Immersion Heater WTP906

Vulcan Electric WTP-906 Immersion Heater WTP906

Vulcan Electric WTP-906 Immersion Heater WTP906 - In, flange material ptfe, includes brass screw plugs. New process tech hxrl4414-c-22l-fr72-pt111-tef l-shaped immersion heater 4kw. Phase, overall length 5-1/4 in, control range 266. Degrees f, 3/4 in npt, min immersion depth 4-1/4. Technical specification item immersion heater, flange, 40000 w, 480/3 for use with mfr.

 

Brinkmann IC-2 Water Bath Immersion Heater

Brinkmann IC-2 Water Bath Immersion Heater

Brinkmann IC-2 Water Bath Immersion Heater - Product type immersion heater. Temp range ambient to 212°f (100°c). Watts 500. Heated area 3-18 in dia. Immersion depth 225 in.

 

Process Technology VS5211 Immersion Heater Three 304 SS Rod s 6 L Heated Area 500 Watts 240 V

Process Technology VS.5211 Immersion Heater, Three 304 SS Rod s, 6″ L Heated Area, 500 Watts, 240 V

Process Technology VS.5211 Immersion Heater, Three 304 SS Rod s, 6″ L Heated Area, 500 Watts, 240 V - Heaters are self-limiting for safer operation. Ptfe-coated heaters are ideal for use in corrosive environments. Multi-element heaters encased in 304 stainless steel or ptfe include a grounded solid-state heating element. The numbers of heating rods coming down from the polypropylene terminal head are dependent on the wattage of the heater 300 watt = 2 rods, 500 watt = 3 rods, and 1000 watt = 5 rods. Heaters include 3 ft wire and flexible conduit.

 

Ulanet 492-4 316 Stainless Steel Heetgrid Utility Immersion Heater with Thermostat Control 10-12 Diameter 14 Height

Ulanet 492-4 316 Stainless Steel Heetgrid Utility Immersion Heater with Thermostat Control, 10-1/2″ Diameter, 14″ Height

Ulanet 492-4 316 Stainless Steel Heetgrid Utility Immersion Heater with Thermostat Control, 10-1/2″ Diameter, 14″ Height - Risers are unheated 1,500 watts, 115 volts. This heater design allows hanging over edge of vessel. The heating element in the coil section helps in concentrating the heat at bottom of vessel. This heater works fine with suitable liquids in laboratory and industrial use. Heating element is polished type 316 stainless steel.

 

Tempco - TFP01586 - Immersion Heater Flange 40000 W 4803

Tempco – TFP01586 – Immersion Heater, Flange, 40000 W, 480/3

Tempco – TFP01586 – Immersion Heater, Flange, 40000 W, 480/3 - Degrees f, 3/4 in npt, min immersion depth 4-1/4. Technical specification item immersion heater, flange, 40000 w, 480/3 for use with mfr. Phase, overall length 5-1/4 in, control range 266. Incoloy(r), watt density 106 sq in, voltage 120, 1. In, flange material ptfe, includes brass screw plugs.

 

George Ulanet 324-114 Heat-O-Matic Immersion Heater short Rod  55 L Heated Area 500 watts 115 VAC

George Ulanet 324-114 Heat-O-Matic Immersion Heater, short Rod , 5.5″ L Heated Area, 500 watts, 115 VAC

George Ulanet 324-114 Heat-O-Matic Immersion Heater, short Rod , 5.5″ L Heated Area, 500 watts, 115 VAC - Heaters with dial temperature controller have a sensitivity of 1°>f when liquid is stirred. S. Standard plug, 230 vac models do not have a plug. Top-mounted pilot light indicates that heater is on. Heaters feature a plastic grip handle and a 6-ft, three-wire cord, 115 vac models have u. Choose from four styles “a” loop, “b” short rod, “c” flat, and “d” long rod which is the same as style “b” only longer.

 

Ulanet 492-2 316 Stainless Steel Heetgrid Utility Immersion Heater with Thermostat Control 7 Diameter 14 Height

Ulanet 492-2 316 Stainless Steel Heetgrid Utility Immersion Heater with Thermostat Control, 7″ Diameter, 14″ Height

Ulanet 492-2 316 Stainless Steel Heetgrid Utility Immersion Heater with Thermostat Control, 7″ Diameter, 14″ Height - The heating element in the coil section helps in concentrating the heat at bottom of vessel. Risers are unheated 1,500 watts, 115 volts. Heating element is polished type 316 stainless steel. This heater works fine with suitable liquids in laboratory and industrial use. This heater design allows hanging over edge of vessel.

 

Process Technology VS5111 Immersion Heater Three 304 SS Rod s 6 L Heated Area 500 Watts 120 V

Process Technology VS.5111 Immersion Heater, Three 304 SS Rod s, 6″ L Heated Area, 500 Watts, 120 V

Process Technology VS.5111 Immersion Heater, Three 304 SS Rod s, 6″ L Heated Area, 500 Watts, 120 V - Multi-element heaters encased in 304 stainless steel or ptfe include a grounded solid-state heating element. Heaters include 3 ft wire and flexible conduit. Ptfe-coated heaters are ideal for use in corrosive environments. The numbers of heating rods coming down from the polypropylene terminal head are dependent on the wattage of the heater 300 watt = 2 rods, 500 watt = 3 rods, and 1000 watt = 5 rods. Heaters are self-limiting for safer operation.

 

Barnstead Mega-Pure Water Stills Immersion Heater for Model Mp-3A 240V

Barnstead Mega-Pure Water Stills Immersion Heater for Model Mp-3A, 240V

Barnstead Mega-Pure Water Stills Immersion Heater for Model Mp-3A, 240V - Choice of wall or bench-mounting. Choose from three models depending upon your specific volume needs. Features a vertical condenser for maximum efficiency and removal of gaseous impurities. Pyrex trap to remove airborne contaminants. Dependable vycor heating elements ul and csa listed.

 

George Ulanet 492-2 Heat-O-Matic Immersion Heater with Thermostatic Controller 1500 watts 7 dia

George Ulanet 492-2 Heat-O-Matic Immersion Heater with Thermostatic Controller, 1500 watts, 7″ dia

George Ulanet 492-2 Heat-O-Matic Immersion Heater with Thermostatic Controller, 1500 watts, 7″ dia - Heaters with thermostatic temperature controller have a sensitivity of 2°>f(1°>c) in an agitated bath. A 6-ft, three-wire cord with plug is included. Voltage transformer listed below is required for 230 vac operation. Heaters feature a coiled heating element to concentrate heat at bottom of vessel.

 

SMAGREHO Immersion Heater£¬Hot Water Heater

SMAGREHO, Immersion Heater£¬Hot Water Heater

SMAGREHO, Immersion Heater£¬Hot Water Heater - It’s your trusted travel companion, bringing the comforts of home to on-the-go living. Plugs directly into power socket. Boils water in minutes. Durable construction. Please note that you should first fill up your container with water, then put the immersion heater in the water.

 

Immersion heater short rod 55 L heated area 500 watts 230 VAC

Immersion heater, short rod, 5.5″ L heated area, 500 watts, 230 VAC

Immersion heater, short rod, 5.5″ L heated area, 500 watts, 230 VAC - Lab equipment & instruments. Immersion heater, short rod, 5. Manufactured by cole-parmer. Heat-o-matic brand products. 5″ l heated area, 500 watts, 230 vac.

 

Immersion heater beaker 275 dia heated area 550 watts 230 VAC

Immersion heater, beaker, 2.75″ dia. heated area, 550 watts, 230 VAC

Immersion heater, beaker, 2.75″ dia. heated area, 550 watts, 230 VAC - 75″ dia. Lab equipment & instruments. Heetgrid brand products. Immersion heater, beaker, 2. Heated area, 550 watts, 230 vac. Manufactured by cole-parmer.

 

George Ulanet 306-20-1100W-230V Heat-O-Matic Immersion Heater Long Rod  20 L Heated Area 1100 watts 230 VAC

George Ulanet 306-20″-1100W-230V Heat-O-Matic Immersion Heater, Long Rod , 20″ L Heated Area, 1100 watts, 230 VAC

George Ulanet 306-20″-1100W-230V Heat-O-Matic Immersion Heater, Long Rod , 20″ L Heated Area, 1100 watts, 230 VAC - Choose from four styles “a” loop, “b” short rod, “c” flat, and “d” long rod which is the same as style “b” only longer. Standard plug, 230 vac models do not have a plug. S. Top-mounted pilot light indicates that heater is on. Heaters feature a plastic grip handle and a 6-ft, three-wire cord, 115 vac models have u. Heaters with dial temperature controller have a sensitivity of 1°>f when liquid is stirred.

 

George Ulanet 306-6-115-1100 Heat-O-Matic Immersion Heater Long Rod  20 L Heated Area 500 watts 115 VAC

George Ulanet 306-6-115-1100 Heat-O-Matic Immersion Heater, Long Rod , 20″ L Heated Area, 500 watts, 115 VAC

George Ulanet 306-6-115-1100 Heat-O-Matic Immersion Heater, Long Rod , 20″ L Heated Area, 500 watts, 115 VAC - Standard plug, 230 vac models do not have a plug. Choose from four styles “a” loop, “b” short rod, “c” flat, and “d” long rod which is the same as style “b” only longer. Heaters feature a plastic grip handle and a 6-ft, three-wire cord, 115 vac models have u. Heaters with dial temperature controller have a sensitivity of ±1°>f when liquid is stirred. Top-mounted pilot light indicates that heater is on. S.

 

Baltimore Aircoil 326397-1 3263971 Immersion Heater 380Vac 3Ph

Baltimore Aircoil 326397-1 3263971 Immersion Heater 380Vac 3Ph

Baltimore Aircoil 326397-1 3263971 Immersion Heater 380Vac 3Ph - Degrees f, 3/4 in npt, min immersion depth 4-1/4. In, flange material ptfe, includes brass screw plugs. Phase, overall length 5-1/4 in, control range 266. New process tech hxrl4414-c-22l-fr72-pt111-tef l-shaped immersion heater 4kw. Technical specification item immersion heater, flange, 40000 w, 480/3 for use with mfr.

 

Tempco Hdl00019 Cartridge Immersion Heater5-14 In L

Tempco Hdl00019 Cartridge Immersion Heater,5-1/4 In. L

Tempco Hdl00019 Cartridge Immersion Heater,5-1/4 In. L - Immersion depth 4-1/4 in. , Voltage 120, 1 phase, overall length 5-1/4 in. , Flange material ptfe, includes brass screw plugs. In. Npt, min. Cartridge immersion heater, 1000 watts, sheath material incoloy(r), watt density 106 sq. , Control range 266 degrees f, 3/4 in.