Best Cold Trap out of top 18 in 2019

 

Labconco 7385040 Stainless Steel CentriVap -105° C Benchtop Cold Trap for Very Low Freezing Point Solvents with North America Receptacle and Plug 230 Volts 60 H

Labconco 7385040 Stainless Steel CentriVap -105° C Benchtop Cold Trap for Very Low Freezing Point Solvents with North America Receptacle and Plug, 230 Volts, 60 H

Labconco 7385040 Stainless Steel CentriVap -105° C Benchtop Cold Trap for Very Low Freezing Point Solvents with North America Receptacle and Plug, 230 Volts, 60 H - The centrivap-105c cold trap collects evaporated liquid from a centrivap concentrator, protecting an accessory vacuum pump from very low freezing point liquids. Exclusive features include brushed, stainless steel and glacier white, epoxy-coated steel exterior with blue accents and temperature graph that illuminates green when collector coil reaches operating temperature of -65° c. Other features include hcfc-free refrigeration system with two 1/3 hp compressors lowers cold trap to -105° c (-157° f) in less than 40 minutes four-liter, stainless steel collector stainless steel lid with two quick-disconnect fittings for connection to a centrivap concentrator stainless steel drain port with corrosion-resistant, nylon valve grounding clip and on/off power switch.

 

Across International T40-CV5110 CleanVac 51 CFM 60 Micron Scroll Pump with T40 -40 Degree F Cold Trap Combo 110V

Across International T40-CV5.110 CleanVac 5.1 CFM 60 Micron Scroll Pump with T40 -40 Degree F Cold Trap Combo, 110V

Across International T40-CV5.110 CleanVac 5.1 CFM 60 Micron Scroll Pump with T40 -40 Degree F Cold Trap Combo, 110V - Vacuum connection 3/8 inch. Cleanvac scroll pump 110v 60hz single phase 250 watts 23 amps. Cold trap reservoir volume 09 gallon (35 liters), traps volume 300ml x 2. T40 cold trap 110v 60hz 1-ph 6a or 220v 50/60hz 1-ph 3a. Cleanvac 60 micron/millitorr 51 cfm kf25/nw25 flange.

 

Cold trap RE - 025260 - EACH

Cold trap RE – 025260 – EACH

Cold trap RE – 025260 – EACH - Perkinelmer. Buchi corporation. Short path distillation.

 

15 Gallon Stainless Steel Cold Trap

1.5 Gallon Stainless Steel Cold Trap

1.5 Gallon Stainless Steel Cold Trap - Running alcohol or ethanol through this system could result in damage. This cold trap is used to prevent condensable vapors from reaching the vacuum pump. Our silicone gasket has a patent pending design that allows it to be used over 10,000 times without deterioration. 100% designed, assembled and tested in the chicago il.

 

Cold trap C - 032352 - EACH

Cold trap C – 032352 – EACH

Cold trap C – 032352 – EACH - Perkinelmer. Short path distillation. Buchi corporation.

 

Labconco 7315023 Acid-Resistant CentriVap Benchtop Vacuum Concentrator Complete Package with Heat Boost Cold Trap Diaphragm Pump Rotor Strobe Light 1725 rpm Glass Lid 115V 12Amps

Labconco 7315023 Acid-Resistant CentriVap Benchtop Vacuum Concentrator Complete Package with Heat Boost, Cold Trap, Diaphragm Pump, Rotor, Strobe Light, 1,725 rpm, Glass Lid, 115V, 12Amps

Labconco 7315023 Acid-Resistant CentriVap Benchtop Vacuum Concentrator Complete Package with Heat Boost, Cold Trap, Diaphragm Pump, Rotor, Strobe Light, 1,725 rpm, Glass Lid, 115V, 12Amps - Programs run time and heat time separately from 1 to 999 minutes, heat from off to 100 degrees c, and stores up to nine user-defined programs. Temperature-controlled centrifugal vacuum concentrator with a maximum speed of 1,725 rpm. 115vac, 60hz input power with 65′ cord and nema 5-15 plug. Concentrator stops when glass lid opens for increased safety. Comes with 300w heater, -50 degree c cold trap, diaphragm vacuum pump, acid-resistant rotor, and centrizap strobe light.

 

Cold trap nut for ATD two required per trap tube - L4275009 - EACH

Cold trap nut for ATD, (two required per trap tube). – L4275009 – EACH

Cold trap nut for ATD, (two required per trap tube). – L4275009 – EACH - Perkinelmer. Short path distillation. Cold trap.

 

Across International SE13c-S2 SolventVap 5 L Rotary Evaporator with Cold Trap Condenser and Chemical Resistant Vacuum Pump WaterVac 07 CFM Pack of 2

Across International SE13c-S2 SolventVap 5 L Rotary Evaporator with Cold Trap Condenser and Chemical Resistant Vacuum Pump, WaterVac 0.7 CFM (Pack of 2)

Across International SE13c-S2 SolventVap 5 L Rotary Evaporator with Cold Trap Condenser and Chemical Resistant Vacuum Pump, WaterVac 0.7 CFM (Pack of 2) - Maximum evaporating flask capacity 13 gallon (5 liters). Receiving flask 079 gallon (3 liter). (no suggestions) 220v 60hz single phase, 10a, 2200 watts (rotation motor 40 watts). Unit/shipping dimensions 30 x 157 x 42″ / 29 x 17 x 35″ (evaporator), 22 x 22 x 22″ (glassware) (w x d x h). Water bath temperature range ambient to 99°c (210°f).

 

BUCHI 11R300112C102 Series R-300 Rota vapor Manual Lift 1 L Heating Bath SJ 2440 Joint Cold Trap Assembly Safety Coating 110V 615 mm Height 400 mm Wide 320 mm Length

BUCHI 11R300112C102 Series R-300 Rota vapor, Manual Lift, 1 L Heating Bath, SJ 24/40 Joint, Cold Trap Assembly, Safety Coating, 110V, 615 mm Height, 400 mm Wide, 320 mm Length

BUCHI 11R300112C102 Series R-300 Rota vapor, Manual Lift, 1 L Heating Bath, SJ 24/40 Joint, Cold Trap Assembly, Safety Coating, 110V, 615 mm Height, 400 mm Wide, 320 mm Length - User-friendly operation due to ergonomic electric or manual lift. Comfortable flask and vapor duct removal thanks to easy to use combo-clip. Precise operation control with integrated digital display of heating temperature, rotation speed and lift position. Choice between 5 l high-temperature and 1 l fast-heating bath. Instant alert with push notification on mobile devices in case of process deviation (with interface i-300 / i-300 pro only).

 

Across International SE13c220 SolventVap 13 gal5 L Rotary Evaporator with Cold Trap Condenser and Motorized Lift 220V 2200W 10 Amp

Across International SE13c.220 SolventVap 1.3 gal/5 L Rotary Evaporator with Cold Trap Condenser and Motorized Lift, 220V, 2200W, 10 Amp

Across International SE13c.220 SolventVap 1.3 gal/5 L Rotary Evaporator with Cold Trap Condenser and Motorized Lift, 220V, 2200W, 10 Amp - Water bath temperature range ambient to 99°c (210°f). Evaporating flask capacity 132 gallon (5 liters). Receiving flask 079 gallon (3 liter). Unit dimensions 30 x 157 x 42″ (w x d x h) shipping dimensions 29 x 17 x 35″ (evaporator), 22 x 22 x 22″ (glassware) (w x d x h). 220v 50/60hz single phase, 2200 watts, 10a (rotation motor 40 watts).

 

15 Gallon 2QT Tank Cold Trap

1.5 Gallon (2QT Tank) Cold Trap

1.5 Gallon (2QT Tank) Cold Trap - No hose is included with this cold trap. 75 diameter by 6. The gasket itself is reversible (doubling the life of our system guaranteed) allowing customers to instantly take it off and flip it over. 5 gallon outer container. This system is recommended to protect pump from condensable vapors. 5hg) • (2) brass valves with 1/4″ barbed fittings. 5 tall. The barbs sticking out of both sides are 1/4″ barbs that will connect to 1/4″ id hose. The center slurry container has a lid for it, this lid simply helps prevent evaporation of your slurry. 25″ diameter x 8. 25″ tall inside container internal dimension 4. This trap comes with an industrial grade, heat cured silicone gasket designed only for our systems. 5inhg (+/-. This cold trap is made of 304ss made in usa, utilizing polycarbonate lids for durability, flexibility and chemical resistance to alcohol and solvents. The vacuum pump will hold the interior 2 quart container for your dry ice slurry in compression with the larger outer lid. 5gl high strength stainless steel outer container (made of solid 304 stainless made in usa) • (1) 2q interior slurry container (made of solid 304 stainless made in usa) • (2) 1/2″ thick clear polycarbonate lids • (1) industrial grade silicone gasket ◦100% chemically resistant ◦can withstand max working temps of 392f gasket only ◦60a durometer density • (1) max vacuum -29. No adhesives are used the system will maintain a vacuum seal only under vacuum. Temperature rated for -100-160f this cold trap comes assembled and includes • (1) 1. There is nothing of equal quality in the market. The larger outer lid will be held in compression with 1. Outside container internal dimensions 7. This is a complete cold trap and will come assembled for instant use.

 

BUCHI 11V100012 Series V-100 Vacuum Pump Without Interface With Woulff Bottle and Cold Trap 415 mm Height 220 mm Width 350 mm Length

BUCHI 11V100012 Series V-100 Vacuum Pump, Without Interface, With Woulff Bottle and Cold Trap, 415 mm Height, 220 mm Width, 350 mm Length

BUCHI 11V100012 Series V-100 Vacuum Pump, Without Interface, With Woulff Bottle and Cold Trap, 415 mm Height, 220 mm Width, 350 mm Length - The vacuum pump v-100 is an economical and chemically resistant ptfe diaphragm vacuum pump with a space saving design. On/offregulated by the interface i-100, it is optimally suited to work with the rotavapor r-100. The ready to use vacuum pump will be delivered with a silencer and 2m of vacuum tubing. It covers the essential needs in vacuum generation.

 

Labconco 7811041 Centrivap Ultra-Low Cold Trap

Labconco 7811041 Centrivap Ultra-Low Cold Trap

Labconco 7811041 Centrivap Ultra-Low Cold Trap - 2” (d) x 13. An epoxy coated aluminum base with an acrylic/pvc thermoplastic control panel. Ultra-low cold trap measures 14. 5” (w) x 24. 5” w x 22. Reaches -55°c in less than 15 minutes. Ultra-low cold trap reaches -85°c in less than 30 minutes. 0” d x 20. These trap inserts remove acids, moisture, radio chemicals or solvents to minimize release of contaminants into the atmosphere. 8”(h), weight 70 lbs. Ready indicator illuminates when the collector coil reaches operating temperature of -40°c. Clear canister is attached to the left side of the cold trap and can hold various trap inserts. Overall dimensions 14. 9” h.

 

Edwards High Vacuum International D15425010 Seal Solder Cold Trap

Edwards High Vacuum International D15425010 Seal Solder Cold Trap

Edwards High Vacuum International D15425010 Seal Solder Cold Trap - Best value vacs brand 3 cfm two stage vacuum pump. 1/4″ flare adapter is not included. Ultimate vacuum rating as low as 50 microns. Dual voltage operation 110-120v / 220v 50/60hz. Flare port connection for ¼” sae with check valve.

 

Lab Glass 1000ml jacketed cold trap light catalytic reactor bottledouble layer

Lab Glass 1000ml jacketed cold trap light catalytic reactor bottle,double layer

Lab Glass 1000ml jacketed cold trap light catalytic reactor bottle,double layer - 3, low linear coefficient of expansion and high annealing point (each addtional item is free shipping, combined orders above usd130 is free shipping) special capacity, joint size, and custom made are available upon request. 1000ml jacketed cold trap light catalytic reactor bottle,double layer made with borosilicate glass 3.

 

Labconco 7460040 CentriVap -84°C Cold Trap 230V 60Hz

Labconco 7460040 CentriVap -84°C Cold Trap, 230V, 60Hz

Labconco 7460040 CentriVap -84°C Cold Trap, 230V, 60Hz - Exclusive features include brushed, stainless steel and glacier white, epoxy-coated steel exterior with blue accents and temperature graph that illuminates green when collector coil reaches operating temperature of -40° c. Other features include hcfc-free refrigeration system with two 1/3 hp compressors lowers cold trap to -84° c (-119° f) in less than 40 minutes four-liter, stainless steel collector stainless steel lid with two quick-disconnect fittings for connection to a centrivap concentrator stainless steel drain port with corrosion-resistant, nylon valve grounding clip and on/off power switch. The centrivap -84°c cold trap collects evaporated liquid from a centrivap concentrator, protecting an accessory vacuum pump from low freezing point liquids.

 

BUCHI 11SR300152CS02 Series R-300 Dynamic Rota vapor System Manual Lift 5 L Heating Bath SJ 2440 Joint Cold Trap Assembly 1-300 Interface without Chiller 110V

BUCHI 11SR300152CS02 Series R-300 Dynamic Rota vapor System, Manual Lift, 5 L Heating Bath, SJ 24/40 Joint, Cold Trap Assembly, 1-300 Interface, without Chiller, 110V

BUCHI 11SR300152CS02 Series R-300 Dynamic Rota vapor System, Manual Lift, 5 L Heating Bath, SJ 24/40 Joint, Cold Trap Assembly, 1-300 Interface, without Chiller, 110V - Choice between 5 l high-temperature and 1 l fast-heating bath. User-friendly operation due to ergonomic electric or manual lift. Comfortable flask and vapor duct removal thanks to easy to use combo-clip. Precise operation control with integrated digital display of heating temperature, rotation speed and lift position. Instant alert with push notification on mobile devices in case of process deviation (with interface i-300 / i-300 pro only).

 

Lab Companion AAA62501 CE-500 U-Type Glass Trap for Model CTB-10 Cold Trap Bath

Lab Companion AAA62501 CE-500 U-Type Glass Trap for Model CTB-10 Cold Trap Bath

Lab Companion AAA62501 CE-500 U-Type Glass Trap for Model CTB-10 Cold Trap Bath - 200mm length below the 24/40 joint. Made of borosilicate glass. Made by hand blowing. Vacuum trap. With 10 mm serrated hose.