Best and Coolest 23 Vacuum Traps

 

Wilmad-LabGlass LG-11065-100 Dewar Shape Vacuum Trap 2L

Wilmad-LabGlass LG-11065-100 Dewar Shape Vacuum Trap, 2L

Wilmad-LabGlass LG-11065-100 Dewar Shape Vacuum Trap, 2L - Lower reservoir has a ptfe valve to remove condensate. Inner cylinder is charged with dry ice/alcohol or liquid nitrogen. Designed to remove relatively large volumes of solvent, these borosilicate glass vacuum traps can be used with rotary evaporators.

 

Chemglass CG-4529-04  Series CG-4529 Vacuum Trap Body for Model CG-4529-01 1000 mL Capacity

Chemglass CG-4529-04 Series CG-4529 Vacuum Trap Body for Model CG-4529-01, 1000 mL Capacity

Chemglass CG-4529-04 Series CG-4529 Vacuum Trap Body for Model CG-4529-01, 1000 mL Capacity - Trap is designed to fit into standard cg-1593 through cg-1595 dewar flasks. D. Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in o.

 

VACUUM TRAP 1000ML

VACUUM TRAP 1000ML

VACUUM TRAP 1000ML - Vacuum trap, large volume, synthware, capacity 1000ml, fits dewar flask size 4300ml.

 

Kimble 926300-0021 Series 926300 Vacuum Trap 10mm Tubing OD 2942 Joints 310mm H x 110mm W

Kimble 926300-0021 Series 926300 Vacuum Trap, 10mm Tubing O.D., 29/42 Joints, 310mm H x 110mm W

Kimble 926300-0021 Series 926300 Vacuum Trap, 10mm Tubing O.D., 29/42 Joints, 310mm H x 110mm W - Two-piece construction allows removal of condensate. Outlets are 180º apart for easy installation into a variety of vacuum systems. Protects the mechanical pump from attack by corrosive vapors which can be condensed by using liquid nitrogen or dry ice/slurry mixtures.

 

Chemglass CG-4513-12 Vacuum Trap with 50 O-Ring Joint 58mm OD x 275mm Length

Chemglass CG-4513-12 Vacuum Trap with #50 O-Ring Joint, 58mm OD x 275mm Length

Chemglass CG-4513-12 Vacuum Trap with #50 O-Ring Joint, 58mm OD x 275mm Length - O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Complete trap is supplied with a stopper, lower body, viton o-ring, and uses. 5mm at the largest serration. 5mm at the smallest serration and 15. Serrated hose connections are 13. Similar to cg-4515 traps but having an o-ring joint to connect the trap body to the stopper. Pinch clamp.

 

Chemglass CG-4516-14  Series CG-4516 Vacuum Trap Complete 60 mm OD 30 mm OD Side and Inner Tube 5550 Joint 300 mm Length

Chemglass CG-4516-14 Series CG-4516 Vacuum Trap Complete, 60 mm OD, 30 mm OD Side and Inner Tube, 55/50 Joint, 300 mm Length

Chemglass CG-4516-14 Series CG-4516 Vacuum Trap Complete, 60 mm OD, 30 mm OD Side and Inner Tube, 55/50 Joint, 300 mm Length - Similar to cg-4514, but with the top inlet tube bent at a 90° angle. , 60mm od, 30mm od side and inner tube, 55/50 joint, 300mm length.

 

Goldleaf Scientific - Vacuum Cold Trap with 10mm Serrated Hose Barbs 225mm Length Below the 3445 Joint

Goldleaf Scientific – Vacuum Cold Trap with 10mm Serrated Hose Barbs & 225mm Length Below the 34/45 Joint

Goldleaf Scientific – Vacuum Cold Trap with 10mm Serrated Hose Barbs & 225mm Length Below the 34/45 Joint - If your vacuum pump ingests vapor it can be detrimental to performance and longevity of the pump. It is crucial to protect your vacuum pump in order to reach and maintain the required vacuum level, and prevent costly and unnecessary oil changes. A vacuum trap or “cold trap” is used to prevent vapors from entering your vacuum pump and contaminating your vacuum pump oil.

 

Laboy HMV010201 Glass Vacuum Trap with 3520 Ball Joints 50 mm Body OD250 mm Length Below 4550 Joint

Laboy HMV010201 Glass Vacuum Trap with 35/20 Ball Joints 50 mm Body O.D.250 mm Length Below 45/50 Joint

Laboy HMV010201 Glass Vacuum Trap with 35/20 Ball Joints 50 mm Body O.D.250 mm Length Below 45/50 Joint - For use with vacuum manifolds having 35/20 socket joints. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. Vacuum trap, also called cold trap, is used to condense all vapors except the permanent gases into a liquid or solid. With joint for easy removal of condense. Laboy glassware are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling. Please order the pump adapter and socket clamp separately.

 

Chemglass CG-4514-16  Series CG-4514 Vacuum Trap Body 5550 Joint

Chemglass CG-4514-16 Series CG-4514 Vacuum Trap Body, 55/50 Joint

Chemglass CG-4514-16 Series CG-4514 Vacuum Trap Body, 55/50 Joint - Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning. , 55/50 joint, sold in each, manufactured by chemglass.

 

Across International T40110 AI  Cold Trap for Safe Vacuum Operations with Ovens -40 Degree F

Across International T40.110 AI Cold Trap for Safe Vacuum Operations with Ovens, -40 Degree F

Across International T40.110 AI Cold Trap for Safe Vacuum Operations with Ovens, -40 Degree F - Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold. Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Features, no dry ice or liquid nitrogen needed, all steel construction for durability, small footprint, plug and play, no assembly required. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back-stream into the cavity.

 

Chemglass CG-4513-20  Series CG-4513 Vacuum Trap Lower Body O-Ring Style 30 O-Ring Joint

Chemglass CG-4513-20 Series CG-4513 Vacuum Trap Lower Body, O-Ring Style, #30 O-Ring Joint

Chemglass CG-4513-20 Series CG-4513 Vacuum Trap Lower Body, O-Ring Style, #30 O-Ring Joint - Similar to cg-4515 traps but having an o-ring joint to connect the trap body to the stopper. 5mm at the smallest serration and 15. Pinch clamp. Complete trap is supplied with a stopper, lower body, viton o-ring, and uses. 5mm at the largest serration. Serrated hose connections are 13. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning.

 

Chemglass CG-4516-02  Series CG-4516 Vacuum Trap Stopper 2942 Joint

Chemglass CG-4516-02 Series CG-4516 Vacuum Trap Stopper, 29/42 Joint

Chemglass CG-4516-02 Series CG-4516 Vacuum Trap Stopper, 29/42 Joint - , 29/42 joint, sold in each, manufactured by chemglass. Similar to cg-4514, but with the top inlet tube bent at a 90° angle.

 

Chemglass CG-4532-01 Complete Vacuum Trap with 4550 Rodaviss Joint

Chemglass CG-4532-01 Complete Vacuum Trap with 45/50 Rodaviss Joint

Chemglass CG-4532-01 Complete Vacuum Trap with 45/50 Rodaviss Joint - 5mm at the smallest serration and 15. Vacuum trap with a 45/50 rodaviss joint. 5mm at the largest serration. Serrated hose connections are 13. Threaded joint provides a vacuum tight seal without grease and if frozen, can be taken apart using the optional loosening ring. Complete trap is supplied with stopper, lower body, viton o-ring, loosening ring, and rodaviss cap.

 

Laboy HMV010118 Glass Vacuum Trap with 10 mm Serrated Hose 250 mm Length Below The 4050 Joint

Laboy HMV010118 Glass Vacuum Trap with 10 mm Serrated Hose 250 mm Length Below The 40/50 Joint

Laboy HMV010118 Glass Vacuum Trap with 10 mm Serrated Hose 250 mm Length Below The 40/50 Joint - Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. D. With joint for easy removal of condense. Of 13mm at the smallest serration and 16mm at the largest serration. Serrated hose connections for side tube have an o. Vacuum trap, also called cold trap, is used to condense all vapors except the permanent gases into a liquid or solid. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.

 

Chemglass CG-4515-01 Complete Serrated Hose Connection Vacuum Trap with 2942 Joint 32mm OD x 200mm Overall Length

Chemglass CG-4515-01 Complete Serrated Hose Connection Vacuum Trap with 29/42 Joint, 32mm OD x 200mm Overall Length

Chemglass CG-4515-01 Complete Serrated Hose Connection Vacuum Trap with 29/42 Joint, 32mm OD x 200mm Overall Length - Of 13mm at the smallest serration and 16mm at the largest serration. Two piece construction for easy removal of condensate. Serrated hose connections have an o. Body length is the overall length from the top of the joint to the bottom of the round bottom. Inlet and outlet are 180° apart for installation into a variety of vacuum systems. D. Stopper has a standard taper inner joint and body has an outer joint.

 

Chemglass CG-4510-04  Series CG-4510 Vacuum Trap 38 mm OD 18 mm OD Side and Inner Tube 250 mm Length

Chemglass CG-4510-04 Series CG-4510 Vacuum Trap, 38 mm OD, 18 mm OD Side and Inner Tube, 250 mm Length

Chemglass CG-4510-04 Series CG-4510 Vacuum Trap, 38 mm OD, 18 mm OD Side and Inner Tube, 250 mm Length - , 38mm od, 250mm length, 18mm od side and inner tube. One piece trap used in the removal of undesired vapors in the vacuum system by condensation.

 

Corning Pyrex Borosilicate Glass Vacuum Trap Separable 2942 Standard Taper Inner and Outer Joint 28mm OD x 200mm L Case of 4

Corning Pyrex Borosilicate Glass Vacuum Trap, Separable, 29/42 Standard Taper Inner and Outer Joint, 28mm OD x 200mm L (Case of 4)

Corning Pyrex Borosilicate Glass Vacuum Trap, Separable, 29/42 Standard Taper Inner and Outer Joint, 28mm OD x 200mm L (Case of 4) - Top and side tubulations are 75 mm long and have same od specified for inlet tube in listings. Body lengths specified exclude joint inlet tube extends to approximately 25 mm from bottom. Body od x length, inlet tube od x length and standard taper joint size shown in table. With standard taper joint 2 piece unit.

 

Chemglass AF-0203-05 Series AF-0203 Main Trap Body for Dual Vacuum Trap Airfree Schlenk

Chemglass AF-0203-05 Series AF-0203 Main Trap Body for Dual Vacuum Trap, Airfree, Schlenk

Chemglass AF-0203-05 Series AF-0203 Main Trap Body for Dual Vacuum Trap, Airfree, Schlenk - Complete item is supplied with one #331 viton o-ring, one cg-139-02 horseshoe clamp, three #116 viton o-rings and two cg-150-05 #28 s. Center to center distance between the traps is 175mm. Dual trap assembly for use with af-0060 or af-0061 manifolds. Both traps can be isolated from the manifold or pump via 0-12mm chem-vac chem-cap valves (h). Pre-trap (b) is 51mm od x 250mm long with 28/15 polished socket joints to connect the line shut off adapter (a) to the main trap stopper assembly (c) which has 28/15 o-ring ball joints. Pinch clamps. Connection to the manifold is made via a #15 o-ring joint (e) while the fore-pump is connected to the main trap assembly at the (f) port using any size of af-0070 or af-0071 adapters depending upon the size of flexible tubing being used. A #15 o-ring joint (g) is placed between the main and pre-trap to permit connection of vacuum measurement device via a af-0300-07 thermocouple adapter. Trap assembly is designed to allow connection to either the right or left side of af-0060 or af-0061 manifolds. S. The main trap (d) is constructed using a 57mm flat o-ring flange and the body is 57mm od x 250mm long.

 

Chemglass CG-4515-02 Complete Serrated Hose Connection Vacuum Trap with 3445 Joint 38mm OD x 225mm Overall Length

Chemglass CG-4515-02 Complete Serrated Hose Connection Vacuum Trap with 34/45 Joint, 38mm OD x 225mm Overall Length

Chemglass CG-4515-02 Complete Serrated Hose Connection Vacuum Trap with 34/45 Joint, 38mm OD x 225mm Overall Length - D. Serrated hose connections have an o. Of 13mm at the smallest serration and 16mm at the largest serration. Inlet and outlet are 180° apart for installation into a variety of vacuum systems. Body length is the overall length from the top of the joint to the bottom of the round bottom. Two piece construction for easy removal of condensate. Stopper has a standard taper inner joint and body has an outer joint.

 

Chemglass CG-4519-01 Complete Plastic Coated Vacuum Trap For Large Volume Solvent Vapor

Chemglass CG-4519-01 Complete Plastic Coated Vacuum Trap, For Large Volume Solvent Vapor

Chemglass CG-4519-01 Complete Plastic Coated Vacuum Trap, For Large Volume Solvent Vapor - Trap is designed for large volume solvent vapor removal during rotary evaporation. Plastic coated to contain solvent in case of breakage and supplied complete with a uhmw lid with handle. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump.

 

Chemglass CG-4530-01 Complete Vacuum Trap

Chemglass CG-4530-01 Complete Vacuum Trap

Chemglass CG-4530-01 Complete Vacuum Trap - The 55/50 standard taper joint connects the trap body with the stopper. Trap is designed for high volume solvent removal by vacuum. The unique design of the stopper decreases the chance of freezing by allowing vapor to pass through the holes in the side of the inner tube. Hose connections are 15mm od at the largest serration.

 

Laboy HMV010121 Glass Vacuum Trap with 10 mm Serrated Hose 300 mm Length Below The 5550 Joint

Laboy HMV010121 Glass Vacuum Trap with 10 mm Serrated Hose 300 mm Length Below The 55/50 Joint

Laboy HMV010121 Glass Vacuum Trap with 10 mm Serrated Hose 300 mm Length Below The 55/50 Joint - Serrated hose connections for side tube have an o. D. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. With joint for easy removal of condense. Vacuum trap, also called cold trap, is used to condense all vapors except the permanent gases into a liquid or solid. Of 13mm at the smallest serration and 16mm at the largest serration. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.

 

Laboy HMV010115 Glass Vacuum Trap with 10 mm Serrated Hose 200 mm Length Below the 2440 Joint

Laboy HMV010115 Glass Vacuum Trap with 10 mm Serrated Hose, 200 mm Length Below the 24/40 Joint

Laboy HMV010115 Glass Vacuum Trap with 10 mm Serrated Hose, 200 mm Length Below the 24/40 Joint - Serrated hose connections for side tube have an o. Of 13mm at the smallest serration and 16mm at the largest serration. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. Vacuum trap, also called cold trap, is used to condense all vapors except the permanent gases into a liquid or solid. With joint for easy removal of condense. D. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.