Best and Coolest 22 Glass Stirrers in 2019

 

Chemglass CG-2045-01  Series CG-2045 Flex-Drive Coupling for Stirrer Shaft 10 mm OD Glass #ad

Chemglass CG-2045-01 Series CG-2045 Flex-Drive Coupling for Stirrer Shaft, 10 mm OD, Glass

Chemglass CG-2045-01 Series CG-2045 Flex-Drive Coupling for Stirrer Shaft, 10 mm OD, Glass #ad - Coupling incorporates a 3in long epoxy coated spring to compensate for misalignment and to help isolate breakage. Top epoxy coated bushing is fitted with an allen screw and will accept 5/16in o. D. Lower end of coupling has a celcon compression nut which secures the glass shaft to the coupling via a silicone rubber insert. The design of our flex-drive stirrer coupling eliminates the need to use rubber hose or universal adapters to attach your glass stirrer shafts to overhead motors. The silicone insert, along with the knurled compression nut, permits hand tightening of both ground and polished shafts. Stirrer motor shafts. Adapters to 1/4″, 3/8in and 1/2″ are also supplied to permit use of coupling with stirrer motors having different drive shaft diameters.

 

New ACE GLASS 10mm OD 690mm OAL PTFE Coated Glass Stirrer Button Type Shaft 8070 #ad

New ACE GLASS 10mm OD 690mm OAL PTFE Coated Glass Stirrer Button Type Shaft 8070

New ACE GLASS 10mm OD 690mm OAL PTFE Coated Glass Stirrer Button Type Shaft 8070 #ad - 8b6 (631)). Biotech bargains california new ace glass 10mm od 690mm oal ptfe coated glass stirrer button type shaft 8070 this product can not be intended for use in either human or animal food manufacturing processes or related purposes.  _gsrx_vers_631 (gs 6. 9.

 

Glass Rod 98 inch Stirrer Glass 250 mm Glass Stirring Rod Pack 10 pcs of stir sticks #ad

Glass Rod 9.8 inch Stirrer Glass 250 mm Glass Stirring Rod Pack: 10 pcs of stir sticks

Glass Rod 9.8 inch Stirrer Glass 250 mm Glass Stirring Rod Pack: 10 pcs of stir sticks #ad - Glass rods are great for blending essential oils and these do a great job with creams, balms, beeswax, butters (shea, cocoa, etc) and diy projects wash off easily without absorbing any fragrance. Stir rods are perfect for stirring the solution. Glass stirrer nothing more nothing less cool cocktail stirrers. Stirring rods are good for mixing volatile substances and acids, useful if you are making preparations for cleaning metals and stones. Perfect for coffee stirrers stir sticks are delightful for stirring tea glass stir is easier to quickly rinse than a spoon.

 

Chemglass CG-2046-90  Series CG-2046 Stirrer Shaft Coupling for CG-2033-11 Motor 254 mm Size #ad

Chemglass CG-2046-90 Series CG-2046 Stirrer Shaft Coupling for CG-2033-11 Motor, 25.4 mm Size

Chemglass CG-2046-90 Series CG-2046 Stirrer Shaft Coupling for CG-2033-11 Motor, 25.4 mm Size #ad - For use with 30l thru 100l process reactor systems. Incorporates a universal stirrer shaft coupling (cg-2046) to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Stainless steel stud and upper coupling attach directly to the motor shaft.

 

Wilmad LG-9500-106 Glass Stirrer Shaft 10 mm Diameter 50L Capacity #ad

Wilmad LG-9500-106 Glass Stirrer Shaft, 10 mm Diameter, 50L Capacity

Wilmad LG-9500-106 Glass Stirrer Shaft, 10 mm Diameter, 50L Capacity #ad - Precision ground with side button for attachment of stirrer blades.

 

Wilmad-Lab Glass LG-9501-102 Polished Glass Stirrer Shaft 12 L Flask Capacity #ad

Wilmad-Lab Glass LG-9501-102 Polished Glass Stirrer Shaft, 12 L Flask Capacity

Wilmad-Lab Glass LG-9501-102 Polished Glass Stirrer Shaft, 12 L Flask Capacity #ad - Precision ground and polished, 10mm od. For use with lg-9475t bearing with ptfe bearing surface, or other bearings with a ptfe interface with the same bore.

 

100 L Cylindrical Flasks - Heavy Duty Polished Glass Stirrer Shaft 28mm Ace Glass Incorporated #ad

100 L Cylindrical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated

100 L Cylindrical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated #ad - Fits ace 89054-598 swivel connector and 89054-602 chuck. For agitators and turbines reference the following numbers 89062-152, 89062-174, 89062-176, 71001-576, 71001-578. Shaft has pre-drilled holes at top and bottom for positive attachment to motor coupling and agitator, respectively. Heavy duty, 28 mm o. Recommended for use with ace ptfe trubore® and mechanical seal bearings. Use with agitators for 28 mm rods. D. Glass stirring shaft for use with ace reactors.

 

50 L Cylindrical Flasks - Heavy Duty Polished Glass Stirrer Shaft 28mm Ace Glass Incorporated #ad

50 L Cylindrical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated

50 L Cylindrical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated #ad - Heavy duty, 28 mm o. Fits ace 89054-598 swivel connector and 89054-602 chuck. Recommended for use with ace ptfe trubore® and mechanical seal bearings. For agitators and turbines reference the following numbers 89062-152, 89062-174, 89062-176, 71001-576, 71001-578. Glass stirring shaft for use with ace reactors. Use with agitators for 28 mm rods. D. Shaft has pre-drilled holes at top and bottom for positive attachment to motor coupling and agitator, respectively.

 

Wilmad-LabGlass LG-9501-104 Polished Glass Stirrer Shaft 590mmL #ad

Wilmad-LabGlass LG-9501-104 Polished Glass Stirrer Shaft, 590mmL

Wilmad-LabGlass LG-9501-104 Polished Glass Stirrer Shaft, 590mmL #ad - Precision ground and polished, 10 mm od. With side button at bottom for attachment of any of the stirrer blades, lg-9505 through lg-9511t. 590 mm length. For use with lg-9475t bearing with ptfe bearing surface, or other bearings with a ptfe interface with the same bore.

 

100 L Cylindrical Flasks - Heavy Duty Polished Glass Stirrer Shaft 28mm Ace Glass Incorporated #ad

100 L Cylindrical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated

100 L Cylindrical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated #ad - Use with agitators for 28 mm rods. Glass stirring shaft for use with ace reactors. Shaft has pre-drilled holes at top and bottom for positive attachment to motor coupling and agitator, respectively. For agitators and turbines reference the following numbers 89062-152, 89062-174, 89062-176, 71001-576, 71001-578. Fits ace 89054-598 swivel connector and 89054-602 chuck. Heavy duty, 28 mm o. Recommended for use with ace ptfe trubore® and mechanical seal bearings. D.

 

Wilmad ML-1765-700 10mm Glass Stirrer Shaft 50-500ml Flask Capacity #ad

Wilmad ML-1765-700 10mm Glass Stirrer Shaft, 50-500ml Flask Capacity

Wilmad ML-1765-700 10mm Glass Stirrer Shaft, 50-500ml Flask Capacity #ad - Precision ground with side button for attachment of stirrer blades.

 

150 L Spherical Flasks - Heavy Duty Polished Glass Stirrer Shaft 28mm Ace Glass Incorporated #ad

150 L Spherical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated

150 L Spherical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated #ad - Recommended for use with ace ptfe trubore® and mechanical seal bearings. Fits ace 89054-598 swivel connector and 89054-602 chuck. Glass stirring shaft for use with ace reactors. D. Heavy duty, 28 mm o. For agitators and turbines reference the following numbers 89062-152, 89062-174, 89062-176, 71001-576, 71001-578. Use with agitators for 28 mm rods. Shaft has pre-drilled holes at top and bottom for positive attachment to motor coupling and agitator, respectively.

 

50 Low-Stance Flasks - Heavy Duty Polished Glass Stirrer Shaft 28mm Ace Glass Incorporated #ad

50 Low-Stance Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated

50 Low-Stance Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated #ad - Glass stirring shaft for use with ace reactors. Heavy duty, 28 mm o. Use with agitators for 28 mm rods. Recommended for use with ace ptfe trubore® and mechanical seal bearings. D. For agitators and turbines reference the following numbers 89062-152, 89062-174, 89062-176, 71001-576, 71001-578. Fits ace 89054-598 swivel connector and 89054-602 chuck. Shaft has pre-drilled holes at top and bottom for positive attachment to motor coupling and agitator, respectively.

 

Chemglass CG-2046-92  Series CG-2046 Stirrer Shaft Coupling for CG-2033-X-11 Motor 254 mm Size #ad

Chemglass CG-2046-92 Series CG-2046 Stirrer Shaft Coupling for CG-2033-X-11 Motor, 25.4 mm Size

Chemglass CG-2046-92 Series CG-2046 Stirrer Shaft Coupling for CG-2033-X-11 Motor, 25.4 mm Size #ad - For use with 30l thru 100l process reactor systems. Stainless steel stud and upper coupling attach directly to the motor shaft. Nylon bushing compresses around shaft using an allen screw. Incorporates a universal stirrer shaft coupling (cg-2046) to compensate for misalignment of drive motor and glass stirrer shaft.

 

Wilmad-LabGlass LG-9501-102 Polished Glass Stirrer Shaft 515mmL #ad

Wilmad-LabGlass LG-9501-102 Polished Glass Stirrer Shaft, 515mmL

Wilmad-LabGlass LG-9501-102 Polished Glass Stirrer Shaft, 515mmL #ad - For use with lg-9475t bearing with ptfe bearing surface, or other bearings with a ptfe interface with the same bore. With side button at bottom for attachment of any of the stirrer blades, lg-9505 through lg-9511t. 515 mm length. Precision ground and polished, 10 mm od.

 

Wilmad-LabGlass LG-9501-100 Polished Glass Stirrer Shaft 445mmL #ad

Wilmad-LabGlass LG-9501-100 Polished Glass Stirrer Shaft, 445mmL

Wilmad-LabGlass LG-9501-100 Polished Glass Stirrer Shaft, 445mmL #ad - For use with lg-9475t bearing with ptfe bearing surface, or other bearings with a ptfe interface with the same bore. 445 mm length. Precision ground and polished, 10 mm od. With side button at bottom for attachment of any of the stirrer blades, lg-9505 through lg-9511t.

 

Wilmad LG-9504-110 Heavy Duty Glass Stirrer Shaft 50 litres Flask Capacity 820 mm Length #ad

Wilmad LG-9504-110 Heavy Duty Glass Stirrer Shaft, 50 litres Flask Capacity, 820 mm Length

Wilmad LG-9504-110 Heavy Duty Glass Stirrer Shaft, 50 litres Flask Capacity, 820 mm Length #ad - Shaft has large side button for attaching stirrer blades. 50000ml flask capacity. 820mm overall length.

 

Wilmad-Lab Glass LG-9501-100 Polished Glass Stirrer Shaft 100-5000 mL Flask Capacity #ad

Wilmad-Lab Glass LG-9501-100 Polished Glass Stirrer Shaft, 100-5000 mL Flask Capacity

Wilmad-Lab Glass LG-9501-100 Polished Glass Stirrer Shaft, 100-5000 mL Flask Capacity #ad - Precision ground and polished, 10mm od. For use with lg-9475t bearing with ptfe bearing surface, or other bearings with a ptfe interface with the same bore.

 

Wilmad LG-9500-100 Glass Stirrer Shaft 10 mm Diameter 100-5000 mL Capacity #ad

Wilmad LG-9500-100 Glass Stirrer Shaft, 10 mm Diameter, 100-5000 mL Capacity

Wilmad LG-9500-100 Glass Stirrer Shaft, 10 mm Diameter, 100-5000 mL Capacity #ad - Precision ground with side button for attachment of stirrer blades.

 

30 L Cylindrical 72 L 100 L Spherical Flasks - Heavy Duty Polished Glass Stirrer Shaft 28mm Ace Glass Incorporated #ad

30 L Cylindrical, 72 L & 100 L Spherical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated

30 L Cylindrical, 72 L & 100 L Spherical Flasks – Heavy Duty Polished Glass Stirrer Shaft, 28mm, Ace Glass Incorporated #ad - Glass stirring shaft for use with ace reactors. Fits ace 89054-598 swivel connector and 89054-602 chuck. Heavy duty, 28 mm o. For agitators and turbines reference the following numbers 89062-152, 89062-174, 89062-176, 71001-576, 71001-578. D. Use with agitators for 28 mm rods. Shaft has pre-drilled holes at top and bottom for positive attachment to motor coupling and agitator, respectively. Recommended for use with ace ptfe trubore® and mechanical seal bearings.

 

Chemglass CG-2046-97  Series CG-2046 Stirrer Shaft Coupling for CG-2033-X-11 Motor 30 mm Size #ad

Chemglass CG-2046-97 Series CG-2046 Stirrer Shaft Coupling for CG-2033-X-11 Motor, 30 mm Size

Chemglass CG-2046-97 Series CG-2046 Stirrer Shaft Coupling for CG-2033-X-11 Motor, 30 mm Size #ad - Nylon bushing compresses around shaft using an allen screw. Incorporates a universal stirrer shaft coupling (cg-2046) to compensate for misalignment of drive motor and glass stirrer shaft. For use with 30l thru 100l process reactor systems. Stainless steel stud and upper coupling attach directly to the motor shaft.

 

Wilmad LG-9504-108 Heavy Duty Glass Stirrer Shaft 22 litres Flask Capacity 720 mm Length #ad

Wilmad LG-9504-108 Heavy Duty Glass Stirrer Shaft, 22 litres Flask Capacity, 720 mm Length

Wilmad LG-9504-108 Heavy Duty Glass Stirrer Shaft, 22 litres Flask Capacity, 720 mm Length #ad - 22000ml flask capacity. 720mm overall length. Shaft has large side button for attaching stirrer blades.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.