Best and Coolest 19 Spinner Flasks in 2019

 

Corning 4502-15L Borosilicate Glass 15L Proculture Spinner Flask with 120mm Flat Center Cap and 2 Angled Sidearms

Corning 4502-15L Borosilicate Glass 15L Proculture Spinner Flask, with 120mm Flat Center Cap and 2 Angled Sidearms

Corning 4502-15L Borosilicate Glass 15L Proculture Spinner Flask, with 120mm Flat Center Cap and 2 Angled Sidearms - Sidearm design permits easy access of 25 and 50ml pipets, while the side baffles enhance aeration and agitation of flask contents. Spinner flask has a 120mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm) maximum working volume of 15l. Reuseable, non-sterile flask has a patented ‘stretch’ impeller design that ensures optimal stirring. Borosilicate glass vessel with orange polypropylene 45gl threaded screw caps, with a polysulfone shaft and a vortex impeller paddle assembly.

 

Wheaton 356945 Glass 50mL Celstir Spinner Flask with 15-415 Screw Caps 54mm x 147mm

Wheaton 356945 Glass 50mL Celstir Spinner Flask, with 15-415 Screw Caps, 54mm x 147mm

Wheaton 356945 Glass 50mL Celstir Spinner Flask, with 15-415 Screw Caps, 54mm x 147mm - Entire unit may be autoclaved which makes cleaning easy. Manufactured from low extractable borosilicate glass. Water jacket allows for precise temperature control. Proportioned to provide a head space ratio of 11 or greater. Impeller rod does not extend through top cap which prevents accidentally knocking unit over.

 

Chemglass CLS-1430-1L Glass 1000mL Dimpled Bottom BioProcess Spinner Flask

Chemglass CLS-1430-1L Glass 1000mL Dimpled Bottom BioProcess Spinner Flask

Chemglass CLS-1430-1L Glass 1000mL Dimpled Bottom BioProcess Spinner Flask - Please note the 6l & 8l versions do not have dimpled bottoms. Micro carrier spinner flasks promote optimal growth of suspension and micro carrier cultures. The complete system includes a flask with two angled sidearms and a ptfe paddle with glass shaft that adjusts trough the compression fitting in the cap. Indented bottoms, 100ml thru 1000ml, prevent accumulation of micro carrier beads under the impeller paddle.

 

Wheaton 356943 Glass 25mL Celstir Spinner Flask with 15-415 Screw Caps 54mm x 134mm

Wheaton 356943 Glass 25mL Celstir Spinner Flask, with 15-415 Screw Caps, 54mm x 134mm

Wheaton 356943 Glass 25mL Celstir Spinner Flask, with 15-415 Screw Caps, 54mm x 134mm - Manufactured from low extractable borosilicate glass. Water jacket allows for precise temperature control. Proportioned to provide a head space ratio of 11 or greater. Entire unit may be autoclaved which makes cleaning easy. Impeller rod does not extend through top cap which prevents accidentally knocking unit over.

 

Corning 4500-3L Borosilicate Glass 3L Proculture Spinner Flask with 100mm Flat Center Cap and 2 Angled Sidearms

Corning 4500-3L Borosilicate Glass 3L Proculture Spinner Flask, with 100mm Flat Center Cap and 2 Angled Sidearms

Corning 4500-3L Borosilicate Glass 3L Proculture Spinner Flask, with 100mm Flat Center Cap and 2 Angled Sidearms - Reuseable, non-sterile flask has a patented ‘stretch’ impeller design that ensures optimal stirring. Borosilicate glass vessel with orange polypropylene 45gl threaded screw caps, with a polysulfone shaft and a vortex impeller paddle assembly. Spinner flask has a 100mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm) maximum working volume of 3l. Sidearm design permits easy access of 25 and 50ml pipets, while the side baffles enhance aeration and agitation of flask contents.

 

Corning 4502-3L Borosilicate Glass 3L Proculture Spinner Flask with 120mm Flat Center Cap and 2 Angled Sidearms

Corning 4502-3L Borosilicate Glass 3L Proculture Spinner Flask, with 120mm Flat Center Cap and 2 Angled Sidearms

Corning 4502-3L Borosilicate Glass 3L Proculture Spinner Flask, with 120mm Flat Center Cap and 2 Angled Sidearms - Borosilicate glass vessel with orange polypropylene 45gl threaded screw caps, with a polysulfone shaft and a vortex impeller paddle assembly. Sidearm design permits easy access of 25 and 50ml pipets, while the side baffles enhance aeration and agitation of flask contents. Spinner flask has a 120mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm) maximum working volume of 3l. Reuseable, non-sterile flask has a patented ‘stretch’ impeller design that ensures optimal stirring.

 

Corning 3563 Plastic Disposable Spinner Flask with Solid Cap Sterile 3L Maximum Working Volume Case of 4

Corning 3563 Plastic Disposable Spinner Flask with Solid Cap, Sterile, 3L Maximum Working Volume (Case of 4)

Corning 3563 Plastic Disposable Spinner Flask with Solid Cap, Sterile, 3L Maximum Working Volume (Case of 4) - Two wide neck openings for easy pouring easily accept a 100ml pipet. Extended paddle design ensures constant top-to-bottom motion of the liquid without having to adjust the height of the paddle. Vertical side baffles break up laminar flow, ensures better mixing and maximizes cell production. Single use only flasks cannot be autoclaved or resterilized with alcohol any attempt to do so will result in degradation of the materials. Bottom contours on the paddle hug the shape of the flask, eliminating dead spots.

 

Chemglass CLS-1430-J3L1  Series CLS-1430 Bioprocess Spinner Flask Jacketed Plain Bottom 200 mm OD 330 mm Height 3000 mL

Chemglass CLS-1430-J3L1 Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, 200 mm OD, 330 mm Height, 3000 mL

Chemglass CLS-1430-J3L1 Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, 200 mm OD, 330 mm Height, 3000 mL - Flasks are typically used with a circulating water bath. Jacket volumes are approximate and flasks are not graduated. Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from type 1 class a borosilicate glass, and a micro carrier style impeller with glass shaft that extends through the cap and ptfe paddle.

 

SPINNER FLASK 125ML 12CS

SPINNER FLASK 125ML 12/CS

SPINNER FLASK 125ML 12/CS - Impeller rod does not extend through top cap which prevents accidentally knocking unit over. Manufactured from low extractable borosilicate glass. Water jacket allows for precise temperature control. Entire unit may be autoclaved which makes cleaning easy. Proportioned to provide a head space ratio of 11 or greater.

 

Corning 4500-15L Borosilicate Glass 15L Proculture Spinner Flask with 100mm Flat Center Cap and 2 Angled Sidearms

Corning 4500-15L Borosilicate Glass 15L Proculture Spinner Flask, with 100mm Flat Center Cap and 2 Angled Sidearms

Corning 4500-15L Borosilicate Glass 15L Proculture Spinner Flask, with 100mm Flat Center Cap and 2 Angled Sidearms - Reuseable, non-sterile flask has a patented ‘stretch’ impeller design that ensures optimal stirring. Borosilicate glass vessel with orange polypropylene 45gl threaded screw cap, with a polysulfone shaft and a vortex impeller paddle assembly. Sidearm design permits easy access of 25 and 50ml pipets, while the side baffles enhance aeration and agitation of flask contents. Spinner flask has a 100mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm) maximum working volume of 15l.

 

Wheaton 356830 Glass 125mL MagnaFlex Microcarrier Spinner Flask with 33-430 Screw Caps 65mm x 155mm

Wheaton 356830 Glass 125mL MagnaFlex Microcarrier Spinner Flask, with 33-430 Screw Caps, 65mm x 155mm

Wheaton 356830 Glass 125mL MagnaFlex Microcarrier Spinner Flask, with 33-430 Screw Caps, 65mm x 155mm - Removable stainless steel pin immobilizes the impeller during handling or decanting to prevent damage to cells or microcarriers. Stirring system increases stirring efficiency and provides a gentle, even circulation throughout the flask while keeping the beads in. Designed for use with microcarrier cultures. Entire unit may be autoclaved which makes clean easy. Side arms for 500ml, 6l flasks allow vented caps which enables the flask to “breath” while protecting from contamination.

 

Chemglass CLS-1430-J3L  Series CLS-1430 Bioprocess Spinner Flask Jacketed Plain Bottom Complete 200 mm OD 330 mm Height 3000 mL

Chemglass CLS-1430-J3L Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, Complete, 200 mm OD, 330 mm Height, 3000 mL

Chemglass CLS-1430-J3L Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, Complete, 200 mm OD, 330 mm Height, 3000 mL - Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from type 1 class a borosilicate glass, and a micro carrier style impeller with glass shaft that extends through the cap and ptfe paddle. Flasks are typically used with a circulating water bath. Jacket volumes are approximate and flasks are not graduated.

 

Corning 4502-6L Borosilicate Glass 6L Proculture Spinner Flask with 120mm Flat Center Cap and 2 Angled Sidearms

Corning 4502-6L Borosilicate Glass 6L Proculture Spinner Flask, with 120mm Flat Center Cap and 2 Angled Sidearms

Corning 4502-6L Borosilicate Glass 6L Proculture Spinner Flask, with 120mm Flat Center Cap and 2 Angled Sidearms - Spinner flask has a 120mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm) maximum working volume of 6l. Reuseable, non-sterile flask has a patented ‘stretch’ impeller design that ensures optimal stirring. Sidearm design permits easy access of 25 and 50ml pipets, while the side baffles enhance aeration and agitation of flask contents. Borosilicate glass vessel with orange polypropylene 45gl threaded screw caps, with a polysulfone shaft and a vortex impeller paddle assembly.

 

Chemglass CLS-1445-3L  Series CLS-1445 Spinner Flask with Adjustable Hanging Bar Complete 165 mm OD 355 mm Height 3L

Chemglass CLS-1445-3L Series CLS-1445 Spinner Flask with Adjustable Hanging Bar, Complete, 165 mm OD, 355 mm Height, 3L

Chemglass CLS-1445-3L Series CLS-1445 Spinner Flask with Adjustable Hanging Bar, Complete, 165 mm OD, 355 mm Height, 3L - Adjustable hanging bar spinner flasks are designed for growth of suspension cultures. The system includes a flat bottom flask with two angled sidearms and a stir bar with glass shaft that adjusts through the compression fitting in the cap.

 

Chemglass CLS-1430-J500  Series CLS-1430 Bioprocess Spinner Flask Jacketed Plain Bottom Complete 110 mm OD 200 mm Height 500 mL

Chemglass CLS-1430-J500 Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, Complete, 110 mm OD, 200 mm Height, 500 mL

Chemglass CLS-1430-J500 Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, Complete, 110 mm OD, 200 mm Height, 500 mL - Flasks are typically used with a circulating water bath. Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from type 1 class a borosilicate glass, and a micro carrier style impeller with glass shaft that extends through the cap and ptfe paddle. Jacket volumes are approximate and flasks are not graduated.

 

Corning 4500-125 Borosilicate Glass 125mL Proculture Spinner Flask with 70mm Flat Center Cap and 2 Angled Sidearms

Corning 4500-125 Borosilicate Glass 125mL Proculture Spinner Flask, with 70mm Flat Center Cap and 2 Angled Sidearms

Corning 4500-125 Borosilicate Glass 125mL Proculture Spinner Flask, with 70mm Flat Center Cap and 2 Angled Sidearms - Borosilicate glass vessel with orange polypropylene 32gl threaded screw caps, with a polysulfone shaft and a vortex impeller paddle assembly. Sidearm design permits easy access of 25ml pipets, while the side baffles enhance aeration and agitation of flask contents. Reuseable, non-sterile flask has a patented ‘stretch’ impeller design that ensures optimal stirring. Spinner flask has a 70mm center neck and two 45 sidearms with 32mm outer neck diameters (inner diameter 24mm) maximum working volume of 125ml.

 

Corning 3561 Plastic Disposable Spinner Flask with Solid Cap Sterile 1L Maximum Working Volume Case of 6

Corning 3561 Plastic Disposable Spinner Flask with Solid Cap, Sterile, 1L Maximum Working Volume (Case of 6)

Corning 3561 Plastic Disposable Spinner Flask with Solid Cap, Sterile, 1L Maximum Working Volume (Case of 6) - Vertical side baffles break up laminar flow, ensures better mixing and maximizes cell production. Two wide neck openings for easy pouring easily accept a 100ml pipet. Extended paddle design ensures constant top-to-bottom motion of the liquid without having to adjust the height of the paddle. Single use only flasks cannot be autoclaved or resterilized with alcohol any attempt to do so will result in degradation of the materials. Bottom contours on the paddle hug the shape of the flask, eliminating dead spots.

 

Chemglass CLS-1430-J6L  Series CLS-1430 Bioprocess Spinner Flask Jacketed Plain Bottom Complete 200 mm OD 445 mm Height 6000 mL

Chemglass CLS-1430-J6L Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, Complete, 200 mm OD, 445 mm Height, 6000 mL

Chemglass CLS-1430-J6L Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, Complete, 200 mm OD, 445 mm Height, 6000 mL - Flasks are typically used with a circulating water bath. Jacket volumes are approximate and flasks are not graduated. Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from type 1 class a borosilicate glass, and a micro carrier style impeller with glass shaft that extends through the cap and ptfe paddle.

 

Chemglass CLS-1430-J1L1  Series CLS-1430 Bioprocess Spinner Flask Jacketed Plain Bottom 150 mm OD 255 mm Height 1000 mL

Chemglass CLS-1430-J1L1 Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, 150 mm OD, 255 mm Height, 1000 mL

Chemglass CLS-1430-J1L1 Series CLS-1430 Bioprocess Spinner Flask, Jacketed, Plain Bottom, 150 mm OD, 255 mm Height, 1000 mL - Flasks are typically used with a circulating water bath. Jacket volumes are approximate and flasks are not graduated. Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from type 1 class a borosilicate glass, and a micro carrier style impeller with glass shaft that extends through the cap and ptfe paddle.