Best and Coolest 17 Lab Stands in 2019

 

Cross Clamp Holder for Lab Stand #ad

Cross Clamp Holder for Lab Stand

Cross Clamp Holder for Lab Stand #ad - Can be used for supporting both rod and shelf (flat panel). Maximum grip size 12 mm. Two-position cross clamp holder. Made of zinc alloy.

 

2x Boss Head Lab Stand Clamp Holds Rod upto 16mm #ad

2x Boss Head Lab Stand Clamp Holds Rod upto 16mm

2x Boss Head Lab Stand Clamp Holds Rod upto 16mm #ad - Quantity shipped, 2. This is a laboratory boss head clamp holder metal grip holder, a usual clamp accessory in the laboratory. Holds rod size 16mm. The clamp is made of pressure aluminium die cast and it is held 90 degree with screws, secure & easy to control.

 

Eisco Labs Lab Stand and Rod Set Heavy Duty Steel 8 x 5 Base 23 Rod #ad

Eisco Labs Lab Stand and Rod Set, Heavy Duty Steel, 8″ x 5″ Base, 23″ Rod

Eisco Labs Lab Stand and Rod Set, Heavy Duty Steel, 8″ x 5″ Base, 23″ Rod #ad - Base 8″ x 5″, rod 23″ length, 25″ diameter. Base can be black or blue. Heavy steel base (3lbs vs 2lbs of other comparable sets).

 

4pcs Labware Instrument Set Four Prong Extension Flask Clamp Condenser Cross Clips for Lab Stand #ad

4pcs Labware Instrument Set Four Prong Extension Flask Clamp Condenser Cross Clips for Lab Stand

4pcs Labware Instrument Set Four Prong Extension Flask Clamp Condenser Cross Clips for Lab Stand #ad - 2cm cross clip size full length approx 10cm width approx 2cm package included 1x 4 prong extension flask clamp 1x condenser clip 2x cross clip. Specifications material zinc alloy four prong extension flask size clamp size full length approx 26. 5cm securing clip size full length approx 18. 5cm rod diameter approx 7mm rod length approx 19. 5cm rod diameter approx 7mm width approx 2.

 

Lab Stands Clamp Holder Metal Grip Cross Clip Support #ad

Lab Stands Clamp Holder Metal Grip Cross Clip Support

Lab Stands Clamp Holder Metal Grip Cross Clip Support #ad - Usual clamp accessory in the lab. Made of zinc alloy. Secure and easy to control. 90 degree with screws. Laboratory iron clip.

 

Pipettor Lab Stand Rack for Pipettes 8 Positions #ad

Pipettor Lab Stand, Rack for Pipettes, 8 Positions

Pipettor Lab Stand, Rack for Pipettes, 8 Positions #ad - Base diameter 7″, top diameter 6″, height 14″. Fit most pipettors. Height 14″. Rack/stand for pipettes.

 

KeL Scientific KS-8110 Cross Clamp Holder for Lab Stand #ad

KeL Scientific KS-8110 Cross Clamp Holder for Lab Stand

KeL Scientific KS-8110 Cross Clamp Holder for Lab Stand #ad - This cross clip will fit rods up to 16 mm or 5/8 inch in diameter. This steel electroplated cross clip is perfect to attach cross sections of your rods to you lab stand.

 

PUL FACTORY Laboratory Iron Retort Stand for Retort Rod 8x5 Base 50cm Rod #ad

PUL FACTORY Laboratory Iron Retort Stand for Retort Rod, 8”x5” Base, 50cm Rod

PUL FACTORY Laboratory Iron Retort Stand for Retort Rod, 8”x5” Base, 50cm Rod #ad - Pul factory rectangular laboratory retort stand basebase size 210x135mm(8. 2×5. 9 inch)rod length 50cm (20 inch) rod diameter10mm it is cast iron with holes for retort rod.

 

Eisco Labs Research Grade Lab Starter Kit - Includes 24 Rod 8x5 Retort Base Beaker Tongs Crucible Tongs BuretteTest Tube Clamp Ring Stand and more #ad

Eisco Labs Research Grade Lab Starter Kit – Includes 24″ Rod, 8″x5″ Retort Base, Beaker Tongs, Crucible Tongs, Burette/Test Tube Clamp, Ring Stand (and more)

Eisco Labs Research Grade Lab Starter Kit – Includes 24″ Rod, 8″x5″ Retort Base, Beaker Tongs, Crucible Tongs, Burette/Test Tube Clamp, Ring Stand (and more) #ad - Ring clamp with boss head has and inner diameter of 76mm and an outer diameter of 91mm, the bosshead can accept rods up to 20mm in diameter burette clamp holds burettes with diameters up to 22mm (usually 100ml burettes) and is spring loaded with 100% powder coated parts. Kit contains (1) base, (1) rod, (1) beaker tong, (1) tripod stand, (1) wire mesh for heating, (1) boss head, (1) lab clamp, (1) retort ring with boss head, (1) burette clamp double, (1) test tube holder, (1) test tube stand (z-shape), (1) test tube brush, (1) spatula. Test tube brush is 215cm in total length, the brush section is 100mm in length and 125mm in diameter flask tongs are 250mm in total length, have vinyl coated tips and has a maximum opening of 200mm spatula has both a spoon side and flat side, is a total of 150mm long, and has a maximum width of 20mm crucible tongs are 250mm in length and have a maximum opening of 200mm test tube tongs are 170mm in length and have a maximum opening of 70mm. The base is 5″x8″ powder coated alloy to resist chemicals and rubber lined bottom to stabilize and prevent bench scratching rod is stainless steel and is 12mm in diameter bosshead holds 2 rods perpendicular to each other and will accept rods up to 24mm in diameter the boss head holds the lab clamp which has a maximum opening of 100mm and a minimum grip of 2mm both the bosshead and clamp are powder coated. Test tube/lab instrument rack will hold up to 17 objects (8) small holes have a diameter of 12mm, (6) medium holes have a diameter of 18mm, and (5) large holes have a diameter of 25mm the rack is powder coated and chemically resistant tripod is cast metal and is 190mm in height and has an inner diameter of 75cm and an outer max diameter of 12cm wire mesh is a square with 12cm sides and a 8cm diameter heating surface.

 

2 pcs Lab Stand Right Angle Clamp Holder Metal Grip Supports #ad

2 pcs Lab Stand Right Angle Clamp Holder Metal Grip Supports

2 pcs Lab Stand Right Angle Clamp Holder Metal Grip Supports #ad - Made of zinc alloy,and it is 90 degree with screws,it is secure and easy to control it. Package include2 pcs right angle clamp holder. Excellent laboratory iron clip,an usual clamp accessory in the lab. Strong die cast body,right angle accept rods up to 21mm dia. Size10cm x 4cm.

 

Glas-Col 099D A130150 Heavy-duty Lab Stand for Stirrers 19mm Shaft Diameter 762mm Shaft Length #ad

Glas-Col 099D A130150 Heavy-duty Lab Stand for Stirrers, 19mm Shaft Diameter, 762mm Shaft Length

Glas-Col 099D A130150 Heavy-duty Lab Stand for Stirrers, 19mm Shaft Diameter, 762mm Shaft Length #ad - With stainless steel mast. 30″ shaft length. Accepts containers up to 16″ diameter.

 

OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head With A Black Laboratory Stand Clip #ad

OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head With A Black Laboratory Stand Clip

OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head With A Black Laboratory Stand Clip #ad - Strong die-cast construction. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Maximum width of jaw opening is 90mm. 3 finger clamp accepts rods up to 20 mm. Covered jaws for protection and grip.

 

Yosoo 4Pcslot Adjustable Clamps Bosshead Clamps Holder for Lab Retort Stand BOSS HEAD Joiner Clamp Metal Grip Support 0-16MM #ad

Yosoo 4Pcs/lot Adjustable Clamps Bosshead Clamps Holder for Lab Retort Stand BOSS HEAD Joiner Clamp Metal Grip Support 0-16MM

Yosoo 4Pcs/lot Adjustable Clamps Bosshead Clamps Holder for Lab Retort Stand BOSS HEAD Joiner Clamp Metal Grip Support 0-16MM #ad - Parcel included 4 x clamp holder. For macro photo studio. This is a laboratory iron slip,an usual clamp accessory in the lab. The clamp is made of zinc alloy,and it is 90 degree with screws,it is secure and easy to control it. Material zinc alloy size0-16mm.

 

Aluminium Flask Support Rings for Lab Stand Base Set of 3 Rings Inner Diameter 2434 #ad

Aluminium Flask Support Rings for Lab Stand Base, Set of 3 Rings, Inner Diameter 2.4″/3″/4″

Aluminium Flask Support Rings for Lab Stand Base, Set of 3 Rings, Inner Diameter 2.4″/3″/4″ #ad - 4″), 80 mm (3″), 100 mm (4″). Lengths 9″ to 10. Out diameters 80 mm (3 1/4″), 80 mm (3 1/4″), 120 mm (4 1/2″). Inner diameters 60 mm (2. 5″. Aluminium support ring, set of 3.

 

Lab Stand Research Starter Kit Laboratory Grade Metalware Set 24 Rod 8x5 Retort Base Burette Test Tube Clamp3 Support Rings #ad

Lab Stand Research Starter Kit Laboratory Grade Metalware Set 24″ Rod, 8″x5″ Retort Base, Burette Test Tube Clamp,3 Support Rings

Lab Stand Research Starter Kit Laboratory Grade Metalware Set 24″ Rod, 8″x5″ Retort Base, Burette Test Tube Clamp,3 Support Rings #ad - Suitable for holding small flask or a small cylindrical glass tube. Suitable for clamping diameter 0-30mm circular objects. Package include1pcs 24″ long stainless steel rod,1pcs 8″ x 5″ black powder coated support stand base,1pcs 4 pronged cork lined burette clamp,3pcs stand retort rings(sizes6cm,8cm,10cm dia),1pcs lab stand right angle clamp holder,2pcs asbestos net(sizes125cm,15cm dia).

 

Eisco Labs Premium Lab Metalware Set - Support Stand Rod Clamp and Retort Ring Pack of 5 #ad

Eisco Labs Premium Lab Metalware Set – Support Stand, Rod, Clamp and Retort Ring, Pack of 5

Eisco Labs Premium Lab Metalware Set – Support Stand, Rod, Clamp and Retort Ring, Pack of 5 #ad - Made from high-quality metal and built to last. Stainless steel rod with a powder coated base provides the perfect setup for any experiment. Eisco premium lab metalware set, support stand, rod, clamp and retort ring(1) base, (1) rod, (1) clamp, (1) retort ringthis premium set includes a stand, rod clamp and ring, all in one packages, eliminating the need to piece together a system for your classroom or lag. Everything is in one box.

 

Metal Aluminium Support Rings with Clamps for Lab Stand Base Set of 3 Inner Diameter 15253 #ad

Metal Aluminium Support Rings with Clamps for Lab Stand Base, Set of 3, Inner Diameter 1.5″/2.5″/3″

Metal Aluminium Support Rings with Clamps for Lab Stand Base, Set of 3, Inner Diameter 1.5″/2.5″/3″ #ad - With cross clamps. 5″), 80 mm (3. Fit rods up to 16 mm. 2″). 5″. Lengths 6″ to 6. 5″), 65 mm (2. Out diameters 60 mm (2 1/4″), 80 mm (3 1/4″), 100 mm (4″). Aluminium support ring, set of 3. Inner diameters 40 mm (1.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.