25 Top Cold Finger Condensers for 2019

 

ACE GLASS 5958-99 Series Condenser with Cold Finger 14 mm OD 625 mm Jacket Length

ACE GLASS 5958-99 Series Condenser with Cold Finger, 14 mm OD, 625 mm Jacket Length

ACE GLASS 5958-99 Series Condenser with Cold Finger, 14 mm OD, 625 mm Jacket Length - Diameter of tube is 14mm. Used in 6472 pilot plant reactor. Jacket length is measured from the lower shoulder of the bulb to the bottom of the finger.

 

Chemglass CG-1222-14 Series CG-1222 Cold Finger Condenser 1420 Inner Joint 100 mm Length Below Joint

Chemglass CG-1222-14 Series CG-1222 Cold Finger Condenser, 14/20 Inner Joint, 100 mm Length Below Joint

Chemglass CG-1222-14 Series CG-1222 Cold Finger Condenser, 14/20 Inner Joint, 100 mm Length Below Joint - Of 10mm at the middle serration. Condenser has an inner joint and a sealed lower drip tip for drop control. D. Hose connections have an o.

 

ACE GLASS 5960-12 Series Allihn Condenser with Cold Finger Hose Barb for 38 Tubing Length Below Joint 215 mm 2440 Joint

ACE GLASS 5960-12 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8″ Tubing, Length Below Joint 215 mm, 24/40 Joint

ACE GLASS 5960-12 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8″ Tubing, Length Below Joint 215 mm, 24/40 Joint - This cold finger has a 24/40 inner joint that fits inside the condenser’s upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 5943, 5945, and 5946 condensers. Has two upper, glass, size d hose connections that take 3/8-inch tubing. Cold finger accessory for standard allihn type condensers.

 

Wilmad LG-17516-100 Cold Finger Condenser3520 Ball Joint1938 Outer Joint

Wilmad LG-17516-100 Cold Finger Condenser,35/20 Ball Joint,19/38 Outer Joint

Wilmad LG-17516-100 Cold Finger Condenser,35/20 Ball Joint,19/38 Outer Joint - Replacement glassware for wg-ev311 rotary evaporators.

 

Cold Finger Condenser Components TS Joint 1420 165mm - 282000-0000 - EACH

Cold Finger Condenser, Components, TS Joint: 14/20, 165mm – 282000-0000 – EACH

Cold Finger Condenser, Components, TS Joint: 14/20, 165mm – 282000-0000 – EACH - Kimble chase life science and research products ll. Kimble chase life science and research products ll.

 

Corning Pyrex Borosilicate Glass Replacement Cold Finger Condenser

Corning Pyrex Borosilicate Glass Replacement Cold Finger Condenser

Corning Pyrex Borosilicate Glass Replacement Cold Finger Condenser - 3350-c). This specially designed pyrex® cold finger condenser is a replacement part for the pyrex® cyanide distilling apparatus (no.

 

Thomas XXX80B1780 Borosilicate Glass Reflux Cold Finger Type Condenser 50mm Flange Diameter 15 x 75mm Length Size A 6-34 Total Height

Thomas XXX80B1780 Borosilicate Glass Reflux Cold Finger Type Condenser, 50mm Flange Diameter, 15 x 75mm Length, Size A, 6-3/4″ Total Height

Thomas XXX80B1780 Borosilicate Glass Reflux Cold Finger Type Condenser, 50mm Flange Diameter, 15 x 75mm Length, Size A, 6-3/4″ Total Height - Flange diameter 50mm. All sizes have a flange on which they are suspended without use of stopper. Borosilicate glass material. Size a finger is 15 x 75mm long. 6-3/4″ total height.

 

Glass Cold Finger Condenser 200mm In Length Below Joint 2440

Glass Cold Finger Condenser 200mm In Length Below Joint 24/40

Glass Cold Finger Condenser 200mm In Length Below Joint 24/40 - 100mm in length below joint14/20. With 14/20joints. With removable hose connections. Made of borosilicate glass. Made by hand blowing.

 

Laboy Glass Cold Finger Condenser 100mm In Length Below 1922 Joint organic Chemistry Condenser

Laboy Glass Cold Finger Condenser 100mm In Length Below 19/22 Joint organic Chemistry Condenser

Laboy Glass Cold Finger Condenser 100mm In Length Below 19/22 Joint organic Chemistry Condenser - Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness. With 19/22 inner joint,the length of the part below joint is 100mm. Liquid circulating through to keep the condenser cold. D. With 8 glass hose connections to accommodate 6mm i. Used in sublimation apparatus. Rubber tubing for water in and out.

 

Chemglass CG-1222-A-01 Series CG-1222-A Micro Cold Finger Condenser 1420 Inner Joint 5 mm Length Below Joint

Chemglass CG-1222-A-01 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 5 mm Length Below Joint

Chemglass CG-1222-A-01 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 5 mm Length Below Joint - The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Cold finger extends either 5mm or 13mm below the joint and is used on a flask with the listed joint size. Minimal surface area provides for better yields while providing adequate cooling. Hose connection is 10mm at the largest serration. Condenser for use in refluxing from 1 to 20ml of solvent in flasks having a capacity of 5 to 50ml. Top hose connection is cooling inlet and middle hose connection is cooling outlet.

 

Laboy HMC010414 Glass Cold Finger Condenser 200 mm Length Below Joint 2440 with Removable Hose Connections

Laboy HMC010414 Glass Cold Finger Condenser 200 mm Length Below Joint 24/40 with Removable Hose Connections

Laboy HMC010414 Glass Cold Finger Condenser 200 mm Length Below Joint 24/40 with Removable Hose Connections - With removable hose connections. With 24/40 inner joint, the length of the part below joint is 200mm. Used in sublimation apparatus. Liquid circulating through to keep the condenser cold. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.

 

Wilmad-LabGlass LG-6290-100 Distilling Head with Cold Finger Condenser Standard Taper 2440

Wilmad-LabGlass LG-6290-100 Distilling Head with Cold Finger Condenser, Standard Taper 24/40

Wilmad-LabGlass LG-6290-100 Distilling Head with Cold Finger Condenser, Standard Taper 24/40 - Thermometer joint is standard taper 10/30. Made of borosilicate glass these distilling heads feature a removable cold finger condenser with a standard taper 29/42 inner. Distilling heads have an upper standard taper 29/42 outer, a lower standard taper inner, and two stopcocks which are in the pressure equalizing line allowing receiver changes without interrupting the distillation.

 

Wilmad-LabGlass LG-6290-112 Cold Finger Condenser for Distilling Head Standard Taper 2942

Wilmad-LabGlass LG-6290-112 Cold Finger Condenser for Distilling Head, Standard Taper 29/42

Wilmad-LabGlass LG-6290-112 Cold Finger Condenser for Distilling Head, Standard Taper 29/42 - Made of borosilicate glass these distilling heads feature a removable cold finger condenser with a standard taper 29/42 inner. Thermometer joint is standard taper 10/30. Distilling heads have an upper standard taper 29/42 outer, a lower standard taper inner, and two stopcocks which are in the pressure equalizing line allowing receiver changes without interrupting the distillation.

 

Cold Finger Condenser TS Joint 2942 Length mm 305 - 518501-0000 - EACH

Cold Finger Condenser, TS Joint: 29/42, Length (mm): 305 – 518501-0000 – EACH

Cold Finger Condenser, TS Joint: 29/42, Length (mm): 305 – 518501-0000 – EACH - Kimble chase life science and research products ll. 100mm length below joint.

 

Fisherbrand Cold Finger Condenser Condenser Astm

Fisherbrand Cold Finger Condenser, Condenser Astm

Fisherbrand Cold Finger Condenser, Condenser Astm - Meets astm a 262-98. Borosilicate glassoverall length, 170mm body diameter, 476mm. For boiling nitric acid test (corrosion-resistant steels).

 

Chemglass CG-3032-05  Series CG-3032 Cold Finger Condenser for Sublimation Adapter

Chemglass CG-3032-05 Series CG-3032 Cold Finger Condenser for Sublimation Adapter

Chemglass CG-3032-05 Series CG-3032 Cold Finger Condenser for Sublimation Adapter - Adapter permits sublimation directly in any reaction vessel having an standard taper outer joint simply remove condenser or other apparatus from joint, insert adapter and begin. Vacuum is controlled via a 2mm ptfe stopcock. Adapter has a #18 chem-thread to allow for the vertical positioning of the cold finger in flasks from 250 to 1000ml. Adapter joint sizes are medium length, but can be used in full length joints. Adapter has two components, the cold finger condenser and vacuum adapter.

 

Laboy HMC010404 Glass Cold Finger Condenser 200 mm Length Below Joint with 2440 Joints

Laboy HMC010404 Glass Cold Finger Condenser 200 mm Length Below Joint with 24/40 Joints

Laboy HMC010404 Glass Cold Finger Condenser 200 mm Length Below Joint with 24/40 Joints - Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness. D rubber tubing for water in and out. Used in sublimation apparatus. With 8 glass hose connections to accommodate 6mm i. With 24/40 inner joint, the length of the part below joint is 200mm. Liquid circulating through to keep the condenser cold.

 

Chemglass CG-1222-05 Series CG-1222 Cold Finger Condenser 2440 Inner Joint 250 mm Length Below Joint

Chemglass CG-1222-05 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 250 mm Length Below Joint

Chemglass CG-1222-05 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 250 mm Length Below Joint - Condenser has an inner joint and a sealed lower drip tip for drop control. Of 10mm at the middle serration. Hose connections have an o. D.

 

Laboy HMC010411 Glass Cold Finger Condenser 100 mm Length Below Joint 1420 with Removable Hose Connections

Laboy HMC010411 Glass Cold Finger Condenser 100 mm Length Below Joint 14/20 with Removable Hose Connections

Laboy HMC010411 Glass Cold Finger Condenser 100 mm Length Below Joint 14/20 with Removable Hose Connections - Liquid circulating through to keep the condenser cold. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness. With removable hose connections. Used in sublimation apparatus. With 14/20 inner joint, the length of the part below joint is 100mm.

 

Corning Pyrex Borosilicate Glass Cold Finger Condensers 2440 Standard Taper Inner Joints 10mm Tubulation OD 12mm Jacket OD x 86mm Jacket Length

Corning Pyrex Borosilicate Glass Cold Finger Condensers, 24/40 Standard Taper Inner Joints, 10mm Tubulation O.D, 12mm Jacket O.D. x 86mm Jacket Length

Corning Pyrex Borosilicate Glass Cold Finger Condensers, 24/40 Standard Taper Inner Joints, 10mm Tubulation O.D, 12mm Jacket O.D. x 86mm Jacket Length - The tubulation o. Is approximately 10mm. 6949. This condenser has a 24/40 inner standard taper joint and is a replacement part for organic chemistry kit, no. This simple pyrex cold finger condenser, of relatively low efficiency, is often used to regulate refluxing by adjusting the flow of air or water through it (dephlegmation). D.

 

Laboy HMC010406 Glass Cold Finger Condenser 250 mm Length Below Joint with 2440 Joints

Laboy HMC010406 Glass Cold Finger Condenser 250 mm Length Below Joint with 24/40 Joints

Laboy HMC010406 Glass Cold Finger Condenser 250 mm Length Below Joint with 24/40 Joints - Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness. With 8 glass hose connections to accommodate 6mm i. With 24/40 inner joint, the length of the part below joint is 250mm. Used in sublimation apparatus. D rubber tubing for water in and out. Liquid circulating through to keep the condenser cold.

 

Laboy HMC010412 Glass Cold Finger Condenser 100 mm Length Below 1922 Joint and Removable Hose Connections

Laboy HMC010412 Glass Cold Finger Condenser 100 mm Length Below 19/22 Joint and Removable Hose Connections

Laboy HMC010412 Glass Cold Finger Condenser 100 mm Length Below 19/22 Joint and Removable Hose Connections - Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness. With removable hose connections. With 19/22 inner joint, the length of the part below joint is 100mm. Used in sublimation apparatus. Liquid circulating through to keep the condenser cold.

 

Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser 2440 Inner Joint 150 mm Length Below Joint

Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 150 mm Length Below Joint

Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 150 mm Length Below Joint - Of 10mm at the middle serration. Hose connections have an o. D. Condenser has an inner joint and a sealed lower drip tip for drop control.

 

Kimble Chase 457000-0125 Coil-Type Reflux Condenser with Two Upper Hose Barb 2440 Standard Taper Joint 125 mm Cold Finger Coil Length

Kimble Chase 457000-0125 Coil-Type Reflux Condenser with Two Upper Hose Barb, 24/40 Standard Taper Joint, 125 mm Cold Finger Coil Length

Kimble Chase 457000-0125 Coil-Type Reflux Condenser with Two Upper Hose Barb, 24/40 Standard Taper Joint, 125 mm Cold Finger Coil Length - Ref astm method d94, d95. Two hose connectors at the top for water inlet and outlet. 283000 does not have a drip joint. With an internal, coil-type cold finger. Standard taper outer joint at the top, standard taper inner drip joint at the bottom.

 

Chemglass CG-1375-03 Series CG-1375 Cold Finger Condenser for 4550 1420

Chemglass CG-1375-03 Series CG-1375 Cold Finger Condenser for 45/50 14/20

Chemglass CG-1375-03 Series CG-1375 Cold Finger Condenser for 45/50 14/20 - The gregar extractor† is the first major advance in laboratory extractor design in over 100 years. During solid extractions the extractor operates upon the principle of continuous solvent displacement, permitting the sample to be immersed in solvent at all times, thereby increasing the efficiency of the solid-solvent interactions. The cg-1506-17, 24/40 250ml round bottom flask and auxiliary condenser (cg-1213 or cg-1218-a) are sold separately. Complete extractor is supplied with extractor body, cold finger condenser, extra coarse extraction thimble, and solvent guide. The design eliminates packing and/or channeling of solid samples normally associated with common soxhlet extractors. Developed by joseph gregar and ken anderson of argonne national laboratories, this extractor is the only unit on the market that can perform all three common types of extraction (see the illustrations).