25 Most Wanted Ikas for 2020

 

IKA Works 2022400 R 1331 Anchor Stirrer 90 mm Diameter 8 mm Diameter x 350 mm L Shaft 1000 RPM Maximum Speed

IKA Works 2022400 R 1331 Anchor Stirrer, 90 mm Diameter, 8 mm Diameter x 350 mm L Shaft, 1000 RPM Maximum Speed

IKA Works 2022400 R 1331 Anchor Stirrer, 90 mm Diameter, 8 mm Diameter x 350 mm L Shaft, 1000 RPM Maximum Speed - The ideal stirrer for medium to highly viscous fluids. Used at low speeds. The r 1331 anchor stirrer creates a tangential flow, high shearing rate at edges and minimum deposits on the vessel wall. Polymer reactions, even distribution of high mineral contents in liquids.

 

Ika R 1342 Propeller stirrer 4-bladed

Ika R 1342 Propeller stirrer, 4-bladed

Ika R 1342 Propeller stirrer, 4-bladed - Local shearing forces. For drawing the material to be mixed from the top to the bottom. Generates axial flow in the vessel. Used at medium to high speeds. Standard stirring element.

 

IKA  2657700 R 182 Boss Head Clamp

IKA 2657700 R 182 Boss Head Clamp

IKA 2657700 R 182 Boss Head Clamp - Clamping range, stand 6, 16 mm clamping range, extension arm 6, 16 mm material cast aluminium.

 

IKA  3378000 ETS-D5 Electronic Contact Thermometer -50 to 450 Degrees C -58 to 778 Degrees F Accuracy of  or - 02 Degree

IKA 3378000 ETS-D5 Electronic Contact Thermometer, -50 to 450 Degrees C, -58 to 778 Degrees F, Accuracy of + or – 0.2 Degree

IKA 3378000 ETS-D5 Electronic Contact Thermometer, -50 to 450 Degrees C, -58 to 778 Degrees F, Accuracy of + or – 0.2 Degree - Choice of three operating modes for variable, uniform, or unsupervised measuring applications. Displays the current measured temperature, the set-point temperature, and the current operating mode. Digital thermometer connects to a compatible magnetic stirrer or heating plate for monitoring temperature of liquids that are being heated. Measures temperature from -50 to 450 degrees c (-58 to 778 degrees f), with an accuracy of + or -02 degree. Starting and high-temperature set-points can be adjusted to turn the connected devices on or off and help ensure proper functioning.

 

IKA  3428000 MS 35 PCR Plate Attachment

IKA 3428000 MS 3.5 PCR Plate Attachment

IKA 3428000 MS 3.5 PCR Plate Attachment - Fixed safety circuit of 550c. Exact temperature setting via digital display (led). Hot top indicator >> hot surface warning to prevent burns. For holding pcr plates, 96-well.

 

IKA C-MAG HS 7 Hotplate Stirrer Package wSupport Rod 100-1500 RPM 1000W 10L 10001529

IKA C-MAG HS 7 Hotplate Stirrer Package w/Support Rod, 100-1500 RPM, 1000W, 10L, 10001529

IKA C-MAG HS 7 Hotplate Stirrer Package w/Support Rod, 100-1500 RPM, 1000W, 10L, 10001529 - Flat construction. Suitable for test tubes, small containers and microtiter plates. Motor is electronically controlled. Features continuous operation, touch operation and automatic start. Speed range of 0 to 2,500 rpm.

 

IKA  3720000 T 18 Digital Ultra-Turrax Disperser Homogenizer 220-240V

IKA 3720000 T 18 Digital Ultra-Turrax Disperser, Homogenizer, 220-240V

IKA 3720000 T 18 Digital Ultra-Turrax Disperser, Homogenizer, 220-240V - Handles volumes from 0001 to 15l (water) and has a quick-connect coupling for efficient changing between dispersing elements (sold separately). Digital unit with led screen with a knob for setting a variable speed range of 3,000 to 25,000rpm, and error code display. 500w motor, with a 220 to 240v power supply, has overload protection to prevent motor damage. Dispersing instrument for the homogenization, emulsification, and suspension of free-flowing and liquid media. Measures 271 x 87 x 106mm (h x w x d), weighs 25kg, and is intended to be mounted on a stand (sold separately).

 

IKA RW 20 Digital Dual-Range Mixer 60 to 500240 to 2000 115 VAC

IKA RW 20 Digital Dual-Range Mixer, 60 to 500/240 to 2000, 115 VAC

IKA RW 20 Digital Dual-Range Mixer, 60 to 500/240 to 2000, 115 VAC - Great value, complete mixer package includes three free accessories stand, clamp, and four-blade propeller digital display makes reproducibility easy through-shaft design provides virtually limitless adjustment for impeller depth two speed ranges to suit a variety of mixing applications maintenance-free motor rated for continuous duty. The quiet, fan-cooled motor features thermal overload shut-off and an efficient heat dissipating design to ensure a long service life. Motor is maintenance-free and rated for continuous duty. Through-shaft design permits adjustment of shaft length and impeller depth-allows you to place or remove mixing vessels without repositioning the mixer. Mixer features step less speed control. The 1/2-inch lcd shows rotational speed in rpm and enables you to precisely control and repeat process parameters. The motor and drive unit are conveniently integrated into a compact aluminum and thermoplastic housing with easy-to-use controls. Use this versatile, affordable mixer for liquid volumes up to five gallons and viscosities up to 10,000 cps (approximately the viscosity of honey). Select speed from 60 to 2000 rpm in two ranges for a variety of applications. What’s included chuck (accepts up to 3/8 inch [10-mm] dia shafts), 6-1/4 inch l x 1/2 inch dia mounting rod, four-blade propeller, mixer stand, clamp, and a 6-1/2-ft, three-wire power cord (115 vac 5070500 includes plug).

 

IKA  3672000 Big Squid IKAMAG White Magnetic Stirrers 100-240V

IKA 3672000 Big Squid IKAMAG White Magnetic Stirrers, 100-240V

IKA 3672000 Big Squid IKAMAG White Magnetic Stirrers, 100-240V - 500 rpm, outstanding chemical resistance due to glass top and synthetic bottom made of tpc-et, recyclable materials. The improved magnetic stirrer now in new design. New digital speed display (led) new electronically controlled motor for more capacity new higher speed range from 0, 2.

 

IKA  4493800 IKAFLON 25 Set Slide Round PTFE-Coated Magnetic Stirring Bar 5 Piece

IKA 4493800 IKAFLON 25 Set Slide Round PTFE-Coated Magnetic Stirring Bar, 5 Piece

IKA 4493800 IKAFLON 25 Set Slide Round PTFE-Coated Magnetic Stirring Bar, 5 Piece - Larger surface area and steady spinning position despite increased turbulence. For use in containers with uneven or curved bases as the pivot ring enables the stirrer to adopt the optimal position for stirring. Dimensions (l x Ø) 25 x 6 mm cylindrical magnetic stirring bars offer excellent centering and smooth spinning. Ptfe coating is chemically inert and resists corrosive substances, hazardous chemicals hot/cold temperatures. Built-in removable pivot ring on the stir bars reduces vibration and wear during stirring.

 

IKA Works INC 4175100 Color Squid IKAMAG Stars and Stripes

IKA Works INC. 4175100 Color Squid IKAMAG Stars and Stripes

IKA Works INC. 4175100 Color Squid IKAMAG Stars and Stripes - Digital speed display (led). Max stirring quantity 1 l. Higher speed range from 0, 2500 rpm. Outstanding chemical resistance due to glass top and synthetic bottom made of tpc-et. Electronically controlled motor for more capacity.

 

IKA  2657800 R 270 Boss Head Clamp

IKA 2657800 R 270 Boss Head Clamp

IKA 2657800 R 270 Boss Head Clamp - Clamping range, stand 25, 36 mm clamping range, extension arm 5, 21 mm material cast aluminium.

 

IKA  3742500 RV 10103 Receiving Flask KS 3520 1 ml

IKA 3742500 RV 10.103 Receiving Flask KS, 35/20, 1 ml

IKA 3742500 RV 10.103 Receiving Flask KS, 35/20, 1 ml - The flask is made of high quality borosilicate glass, uncoated, 1000 ml. Clamping range 05, 10 mm. It allows you to quickly and easily remove the stirring elements without any tools.

 

IKA Eurostar 20 High-Speed Digital Mixer 150 to 6000 RPM 230 VAC

IKA Eurostar 20 High-Speed Digital Mixer, 150 to 6000 RPM, 230 VAC

IKA Eurostar 20 High-Speed Digital Mixer, 150 to 6000 RPM, 230 VAC - Mixing speeds up to 6000 rpm allow for rapid mixing high-performance mixer for volumes up to 5. 3 gallons (20 liters) and viscosities up to 10,000 cps. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. Quiet, fan-cooled motors feature thermal overload shut-off, and an efficient heat-dissipating design to ensure a long service life. Precision cone seat ensures stirring shaft stability through full speed range. Easy-to-use controls and a clear led display of rpm enable you to precisely control and repeat your process parameters. Motor is maintenance-free and rated for continuous duty. These mixers feature a motor and drive unit conveniently integrated into a compact aluminum and thermoplastic housing. Mixers feature infinitely adjustable stepless speed control. This guarantees a constant speed even with changes in fluid viscosity. Safety circuits ensure automatic cut-off in an anti-stall or overload condition and also produce safe, smooth starts to prevent spraying.

 

Ika Works 20000440 PT 10070 Temperature Sensor Stainless Steel Pack of 3 pcs

Ika Works 20000440, PT 100.70 Temperature Sensor Stainless Steel (Pack of 3 pcs)

Ika Works 20000440, PT 100.70 Temperature Sensor Stainless Steel (Pack of 3 pcs) - 70 temperature sensor stainless steel for use with ret control-visc and ret control-visc white depth of immersion 230 mm diameter 3 mm material alsl 316 ti. Pt 100.

 

IKA  1412100 R 2723 Telescopic Stand

IKA 1412100 R 2723 Telescopic Stand

IKA 1412100 R 2723 Telescopic Stand - Diameter of support rod 34 mm dimensions (w x d) 460 x 420 mm height 620, 1010 mm max. Particularly stable stand with h-shape base which prevents the stand from tipping backwards. With rheological measurements using overhead stirrers. Additionally equipped with a pneumatic spring stand rod, which enables heavy instruments / attachments to be raised and lowered smoothly without difficulty, e. The stand has an adjustment screw which can be used to compensate for an uneven laboratory table surface. G. Load 10 kg stroke 390 mm.

 

Ika R 1345 Propeller stirrer 4-bladed

Ika R 1345 Propeller stirrer, 4-bladed

Ika R 1345 Propeller stirrer, 4-bladed - For drawing the material to be mixed from the top to the bottom. Generates axial flow in the vessel. Used at medium to high speeds. Local shearing forces. Standard stirring element.

 

IKA 3378000 ETS-D5 Programmable Temperature Probe

IKA 3378000 ETS-D5 Programmable Temperature Probe

IKA 3378000 ETS-D5 Programmable Temperature Probe - Mode a is suitable for work with varying parameters and is safety temperature adjustable mode b is suitable for series operation under uniform conditions mode c is suitable for unsupervised operation. Sensor features optimized pid control with three modes of operation — ensuring perfect temperature control without overshooting the set temperature, even in the case of quick heating.

 

IKA  3340000 VORTEX 3 Orbital Shaker 200-240V

IKA 3340000 VORTEX 3 Orbital Shaker, 200-240V

IKA 3340000 VORTEX 3 Orbital Shaker, 200-240V - Holds a single test tube and accommodates attachments (sold separately) that hold test tubes, an erlenmeyer flask, a microplate, or other lab vessels with a total weight of 04kg. Benchtop orbital shaker with variable speed range of 0 to 2,500rpm for gentle to vigorous mixing or vortexing with a smooth, continuous circular motion. Rotary dial controls speed for continuous or short-time operation. Die-cast metal zinc case for durability. Orbital motion range of 4mm to ensure even mixing.

 

IKA Works 8033500 RV 8 Flex Package

IKA Works 8033500 RV 8 Flex Package

IKA Works 8033500 RV 8 Flex Package - Glassware excluded. 230v. Ika rv 8 drive and heating bath hb 10. Use your own glassware set or choose from a wide variety. Laboratory rotary evaporator, flex package.

 

IKA  2900001 A 11 Basic Analytical Mill 100-115V

IKA 2900001 A 11 Basic Analytical Mill, 100-115V

IKA 2900001 A 11 Basic Analytical Mill, 100-115V - For embrittlement of grinding materials with liquid nitrogen in the grinding chamber, optionally, a 250 ml grinding chamber is available. With delivery)., Moist and gluey materials can be pulverized by adding water, grinding chamber made of tefcel (ptfe, glass fiber-reinforced) with stainless steel inlet (1. With delivery). This beater can be used for a mohs hardness up to 6 (incl. Cutting grinding for pulverizing soft, fibrous materials with a cutting blade (not incl. Batch mill for 2 different grinding procedures impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. With delivery). 4571), useful volume 80 ml (incl.

 

IKA Works INC 3907500 Lab disc IKAMAG White

IKA Works INC. 3907500 Lab disc IKAMAG White

IKA Works INC. 3907500 Lab disc IKAMAG White - Wear-free drive with no moving parts. To ensure better mixing, the lab disc can reverse direction of rotation automatically every 30 seconds. Ultra-flat compact magnetic stirrer, guaranteed with modern magnet coil technology.

 

IKA 3547700 H 38 Holding Rod

IKA 3547700 H 38 Holding Rod

IKA 3547700 H 38 Holding Rod - Number of items 1. Description ika 2657700 laboratory mixer boss head clamp. Mixer head clamp. For fastening ets-d5 or ets-d6 to the support rod h 16 v.

 

IKA Works INC 3698400 Color Squid IKAMAG Wave

IKA Works INC. 3698400 Color Squid IKAMAG Wave

IKA Works INC. 3698400 Color Squid IKAMAG Wave - Electronically controlled motor for more capacity. Max stirring quantity 1 l. Digital speed display (led). Outstanding chemical resistance due to glass top and synthetic bottom made of tpc-et. Higher speed range from 0, 2500 rpm.

 

IKA 5020001 RET Control-visc Stirring Hot Plate 115V

IKA 5020001 RET Control-visc Stirring Hot Plate, 115V

IKA 5020001 RET Control-visc Stirring Hot Plate, 115V - Improved heat control technology increases safety, while hot top indicator warns users to help prevent burns and injuries. Built-in bnc connector allows you to attach an electrode for analyzing and adjusting the ph of your sample. Round stainless steel top provides quick and effective heat transfer to your samples. This innovative unit offers the most advanced features within the market today, providing you the ability to monitor your sample activity more accurately. Built-in temperature sensor for precise temperature control. Monitor and weigh samples up to 2 kg using the integrated weighing function. Built-in rs-232 interface allows direct connection to a pc for control and documentation of trials for later study. Utilize the adjustable, from 122 to 698°f (50 to 370°c), over-temperature safety circuit to protect samples from overheating. Monitor ph of your sample with built-in bnc connector. Set hot plate temperature up to 644°f (340°c) and observe the actual temperature of the sample with the temperature probe. Easily examine all parameters on the alphanumeric graphical tft lcd with excellent image quality, easy-to-use navigation control, torque trend, and timer/countdown functions. First stirring hot plate to weigh, check ph, and monitor temperature weigh and stir samples in one convenient unit.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.