24 Most Wanted Wtws

 

WTW 1FD570 inoLab Multi 9630 IDS Multiparameter Benchtop Meter Single

WTW 1FD570 inoLab Multi 9630 IDS Multiparameter Benchtop Meter, Single

WTW 1FD570 inoLab Multi 9630 IDS Multiparameter Benchtop Meter, Single - With a large 169 color graphic display under a hygienic glass shield and antibacterial keyboard for use, even in critical areas. Up to three of the same or different parameters can be measured. Use the new wireless modules together with the new ids plug head sensors, be independent from cables and measure i. Two usb interfaces to communicate with the computer, printer or usb memory stick allow the transfer of all data. The massive zinc die-casting lower housing adds safety against interference and ensure a safe, stable stand on the lab bench. Digital high performance multi-parameter device with three inputs for ph, ise, conductivity and dissolved oxygen and comprehensive glp functions. An activatable user administration expands the automatic glp documentation by additional safety and traceability. Conveniently under laboratory hoods or laminar flow benches. The scope of delivery includes the multilab importer to capture data via excel as well as the multilab user (user administration). Modern high-performance multi-parameter meter with three galvanically isolated measuring channels ph/mv, ise (including incremental process), conductivity and oxygen measurement. E. Integratable adapter for conventional ph/orp/ise electrodes available.

 

WTW 103-635 Replacement Waterproof Combination pH Electrode

WTW 103-635 Replacement Waterproof Combination pH Electrode

WTW 103-635 Replacement Waterproof Combination pH Electrode - With a built-in temperature probe, the sentix 41 electrode has a robust plastic shaft and a low-maintenance gel reference system. Ideal for portable measurements, as well as for routine measurements in-the-laboratory.

 

WTW 103642 81 pH Probe Sentix

WTW 103642 #81 pH Probe Sentix

WTW 103642 #81 pH Probe Sentix - Sentix electrodes with liquid electrolyte, an easy-to-clean glass shaft and platinum diaphragm can be used even for complicated samples. For demanding measurements in-the-laboratory.

 

WTW 1AA112 inoLab pH 7110 Set 2 Benchtop Meters

WTW 1AA112 inoLab pH 7110 Set 2 Benchtop Meters

WTW 1AA112 inoLab pH 7110 Set 2 Benchtop Meters - Meter with universal power supply, electrode arm and operation manual. 3in1 ph electrode sentix 41, buffers, 3 mol/l kcl. For ac and battery operation. Easy-to-operate basic ph/mv benchtop meter with din socket for routine measurement.

 

Oxygen Sensor StirrOx G Sensor - Sensors and Accessories WTW

Oxygen Sensor, StirrOx G Sensor – Sensors and Accessories, WTW

Oxygen Sensor, StirrOx G Sensor – Sensors and Accessories, WTW - The membrane can be used for up to six months. Ordering information sensors are supplied with an accessory case, spare parts, and maintenance supplies. Simple air calibration can be achieved by using a calibration vessel. The stirrox self-stirring oxygen sensor simultaneously stirs and measures oxygen in karlsruhe bottles and winkler bottles. These galvanic sensors are ready-to-use and are equipped with protective hoods for rough conditions. Use for up to six months with only one electrolyte filling. Includes a waterproof plug. Single-handed operation allows for rapid series measurements. Features temperature compensation and low approach flow. Sensor also features high signal resolution, temperature compensation, rapid response, and membrane leakage monitoring. 008µg h-1 (mg/l)-1, and features temperature compensation. Cellox sensors are membrane-covered and waterproof. Sensor uses a constant approach flow for high reproducibility, consumes a very low amount of oxygen, only 0. Durox oxygen sensors are membrane-covered and waterproof. The sentix ph electrode features optimized membrane glass that guarantees quick measurement, even at low temperature. Includes a waterproof plug.

 

WTW 1FD57K inoLab Multi 9630 SET K Multiparameter Benchtop Meter pH-Oxi-Cond-Set

WTW 1FD57K inoLab Multi 9630 SET K Multiparameter Benchtop Meter, pH-/Oxi-/Cond-Set

WTW 1FD57K inoLab Multi 9630 SET K Multiparameter Benchtop Meter, pH-/Oxi-/Cond-Set - Modern high-performance multi-parameter meter with three galvanically isolated measuring channels ph/mv, ise (including incremental process), conductivity and oxygen measurement. Use the new wireless modules together with the new ids plug head sensors, be independent from cables and measure i. Up to three of the same or different parameters can be measured. The massive zinc die-casting lower housing adds safety against interference and ensure a safe, stable stand on the lab bench. The scope of delivery includes the multilab importer to capture data via excel as well as the multilab user (user administration). E. Digital high performance multi-parameter device with three inputs for ph, ise, conductivity and dissolved oxygen and comprehensive glp functions. Integratable adapter for conventional ph/orp/ise electrodes available. Conveniently under laboratory hoods or laminar flow benches. With a large 169 color graphic display under a hygienic glass shield and antibacterial keyboard for use, even in critical areas. An activatable user administration expands the automatic glp documentation by additional safety and traceability. Two usb interfaces to communicate with the computer, printer or usb memory stick allow the transfer of all data.

 

250 mL - Buffers Ready to Use WTW

250 mL – Buffers, Ready to Use, WTW

250 mL – Buffers, Ready to Use, WTW - Traceable to nist reference temperature at 25 °c 1 litre container with a separate compartment for the sample.

 

1 L - Buffers Ready to Use WTW

1 L – Buffers, Ready to Use, WTW

1 L – Buffers, Ready to Use, WTW - Traceable to nist reference temperature at 25 °c 1 litre container with a separate compartment for the sample.

 

WTW SenTix 4241 Electrode pHATC for 58901-13 3 ft with BNCbanana plug ATC

WTW SenTix 42/41 Electrode pH/ATC for 58901-13 (3 ft with BNC/banana plug ATC)

WTW SenTix 42/41 Electrode pH/ATC for 58901-13 (3 ft with BNC/banana plug ATC) - Description electrode ph/atc for 58901-13 (3 ft with bnc/banana plug atc). Number of items 1.

 

250 mL - Buffers Ready to Use WTW

250 mL – Buffers, Ready to Use, WTW

250 mL – Buffers, Ready to Use, WTW - Traceable to nist reference temperature at 25 °c 1 litre container with a separate compartment for the sample.

 

OxiCal-SL Calibration Vessel - Sensors and Accessories WTW

OxiCal-SL Calibration Vessel – Sensors and Accessories, WTW

OxiCal-SL Calibration Vessel – Sensors and Accessories, WTW - 008µg h-1 (mg/l)-1, and features temperature compensation. These galvanic sensors are ready-to-use and are equipped with protective hoods for rough conditions. Includes a waterproof plug. Features temperature compensation and low approach flow. Durox oxygen sensors are membrane-covered and waterproof. Simple air calibration can be achieved by using a calibration vessel. The sentix ph electrode features optimized membrane glass that guarantees quick measurement, even at low temperature. Single-handed operation allows for rapid series measurements. Cellox sensors are membrane-covered and waterproof. The membrane can be used for up to six months. Ordering information sensors are supplied with an accessory case, spare parts, and maintenance supplies. Sensor also features high signal resolution, temperature compensation, rapid response, and membrane leakage monitoring. Sensor uses a constant approach flow for high reproducibility, consumes a very low amount of oxygen, only 0. The stirrox self-stirring oxygen sensor simultaneously stirs and measures oxygen in karlsruhe bottles and winkler bottles. Includes a waterproof plug. Use for up to six months with only one electrolyte filling.

 

WTW 2FD46H MultiLine Dual-Channel Multi 3420 Meter with IDS SenTix 950 IDS TetraCon 925 and Kit

WTW 2FD46H MultiLine Dual-Channel Multi 3420 Meter with IDS SenTix 950, IDS TetraCon 925 and Kit

WTW 2FD46H MultiLine Dual-Channel Multi 3420 Meter with IDS SenTix 950, IDS TetraCon 925 and Kit - These two advanced features ensure accurate, reproducible results. The innovative, digital technology of the multiline ids series eliminates the need for dedicated meters for specific parameter measurements now, measuring is simply a function of the sensor attached to the instrument, making the multiline series wtw’s most intelligent and flexible products available today. The cmc feature display is a graphical scale allowing analysts to quickly observe and verify that their measurements fall within the appropriate measuring range. Features include state-of-the-art plug/socket technology, firmware updates via the internet, two usb ports, vibrant color display for easy readability, and an intuitive menu navigation platform for straight forward operation. The qsc feature ensures sensor reliability by monitoring the sensor(s) performance, which is displayed on the meter as an incremental color spectrum (from green to red). The multiline series incorporates two new proprietary features as well quality sensor control (qsc) and continuous measurement control (cmc). The wtw multiline ids series of meters are the first of their kind, redefining the way electrochemical measurements are conducted.

 

WTW 103636 Combination pH electrode gel filled with temperature compensation and 10-ft cable

WTW 103636 Combination pH electrode, gel filled with temperature compensation and 10-ft cable

WTW 103636 Combination pH electrode, gel filled with temperature compensation and 10-ft cable - Manufactured by cole-parmer, combination ph electrode, gel filled with temperature compensation and 10-ft cable, country of origin, germany, science-lab-supplies.

 

Oxygen Sensor DurOx Sensor with 3 m 10 Long Cable - Sensors and Accessories WTW

Oxygen Sensor, DurOx Sensor with 3 m (10′) Long Cable – Sensors and Accessories, WTW

Oxygen Sensor, DurOx Sensor with 3 m (10′) Long Cable – Sensors and Accessories, WTW - Single-handed operation allows for rapid series measurements. These galvanic sensors are ready-to-use and are equipped with protective hoods for rough conditions. The membrane can be used for up to six months. Sensor uses a constant approach flow for high reproducibility, consumes a very low amount of oxygen, only 0. Simple air calibration can be achieved by using a calibration vessel. Cellox sensors are membrane-covered and waterproof. The sentix ph electrode features optimized membrane glass that guarantees quick measurement, even at low temperature. Use for up to six months with only one electrolyte filling. Includes a waterproof plug. Durox oxygen sensors are membrane-covered and waterproof. 008µg h-1 (mg/l)-1, and features temperature compensation. Includes a waterproof plug. Ordering information sensors are supplied with an accessory case, spare parts, and maintenance supplies. Sensor also features high signal resolution, temperature compensation, rapid response, and membrane leakage monitoring. Features temperature compensation and low approach flow. The stirrox self-stirring oxygen sensor simultaneously stirs and measures oxygen in karlsruhe bottles and winkler bottles.

 

WTW TetraCon 925-3 IDS Conductivity Probe 2000 mS 3 m Cable

WTW TetraCon 925-3 IDS Conductivity Probe, 2000 mS; 3 m Cable

WTW TetraCon 925-3 IDS Conductivity Probe, 2000 mS; 3 m Cable - Accessory type conductivity cell. Description ids conductivity probe, 2000 ms 3 m cable. Number of items 1. Range 10 µs to 2000 ms at ±05 % of value.

 

WTW 600544 Cal KalStd P Turbidity Meter 10000NTU IR

WTW 600544 Cal. Kal.Std P Turbidity Meter, 10000NTU IR

WTW 600544 Cal. Kal.Std P Turbidity Meter, 10000NTU IR - The ir measurement is required by din iso, the white light measuring by us epa. Therefore, lab meters for high values are equipped with several measuring options ratio modes calculate the final result from different measured angles. Nephelometric or transmittance measuring-the nephelometric measurement at 90° scattered light is advantageous for lower turbidity, whereas the transmission measurement at 180° is beneficial for medium to high turbidity values with increasing turbidity, restray and scattering effects between particles are growing bigger. White light has a higher sensitivity for small particles, however, the inherent coloration of the solution has a stronger disturbing effect in this case. For ratiometric measurements, there is no specific standard method to be followed rather, procedures are established by the application or industry. The reduction of light intensity in this case leads to a more accurate result than a 90° nephelometric measurement.

 

OxiCal-ST Calibration Vessel - Sensors and Accessories WTW

OxiCal-ST Calibration Vessel – Sensors and Accessories, WTW

OxiCal-ST Calibration Vessel – Sensors and Accessories, WTW - Sensor uses a constant approach flow for high reproducibility, consumes a very low amount of oxygen, only 0. Includes a waterproof plug. Sensor also features high signal resolution, temperature compensation, rapid response, and membrane leakage monitoring. Use for up to six months with only one electrolyte filling. Ordering information sensors are supplied with an accessory case, spare parts, and maintenance supplies. Simple air calibration can be achieved by using a calibration vessel. The sentix ph electrode features optimized membrane glass that guarantees quick measurement, even at low temperature. These galvanic sensors are ready-to-use and are equipped with protective hoods for rough conditions. Includes a waterproof plug. The membrane can be used for up to six months. Cellox sensors are membrane-covered and waterproof. Single-handed operation allows for rapid series measurements. 008µg h-1 (mg/l)-1, and features temperature compensation. The stirrox self-stirring oxygen sensor simultaneously stirs and measures oxygen in karlsruhe bottles and winkler bottles. Features temperature compensation and low approach flow. Durox oxygen sensors are membrane-covered and waterproof.

 

Oxygen Sensor CellOx Sensor with 20 m 65 Long Cable - Sensors and Accessories WTW

Oxygen Sensor, CellOx Sensor with 20 m (65′) Long Cable – Sensors and Accessories, WTW

Oxygen Sensor, CellOx Sensor with 20 m (65′) Long Cable – Sensors and Accessories, WTW - Cellox sensors are membrane-covered and waterproof. Features temperature compensation and low approach flow. These galvanic sensors are ready-to-use and are equipped with protective hoods for rough conditions. The stirrox self-stirring oxygen sensor simultaneously stirs and measures oxygen in karlsruhe bottles and winkler bottles. Simple air calibration can be achieved by using a calibration vessel. Includes a waterproof plug. Ordering information sensors are supplied with an accessory case, spare parts, and maintenance supplies. Sensor also features high signal resolution, temperature compensation, rapid response, and membrane leakage monitoring. Use for up to six months with only one electrolyte filling. The membrane can be used for up to six months. 008µg h-1 (mg/l)-1, and features temperature compensation. Single-handed operation allows for rapid series measurements. The sentix ph electrode features optimized membrane glass that guarantees quick measurement, even at low temperature. Sensor uses a constant approach flow for high reproducibility, consumes a very low amount of oxygen, only 0. Durox oxygen sensors are membrane-covered and waterproof. Includes a waterproof plug.

 

WTW 2AA213 ProfiLine Single Parameter Portable pH 3210 Set Drinking Water Set

WTW 2AA213 ProfiLine Single Parameter Portable pH 3210 Set (Drinking Water Set)

WTW 2AA213 ProfiLine Single Parameter Portable pH 3210 Set (Drinking Water Set) - The portable wtw profiline meter series is available in three (3) series versions, the 3110/3205-basic series, 3210-professional series and 3310-advanced series, each with a distinct level of sophistication for the independent measurement of ph, conductivity, or dissolved oxygen. All versions have a robust housing with ip 66/67 protection, large graphic display for excellent readability, sensor status indicator informing users that sensors need either re-calibration or replacement, and an auto-read feature which “locks-in” the reading for precise measurements.

 

WTW 401205 MPP 930 IDS Three-Channel Depth Probe

WTW 401205 MPP 930 IDS Three-Channel Depth Probe

WTW 401205 MPP 930 IDS Three-Channel Depth Probe - The mpp 930 ids can measure up to 3 parameters. Typical applications include limnological testing of waters with a depth of up to 100 mm, but also measurements in bore holes, monitoring of landfills and more. The multi 3630 is required to measure for all mpp ids. Every sensor measures the temperature required for its compensation on its own. All probes are available in kits with sensors. Mpp ids – the digital multi-parameters (up to three main parameters) depth probes with built-in depth measurement to use in profile measuring. Mpp ids multi-parameter probes for simultaneous measurement of up to three parameters from the following selection dissolved oxygen (optical), ph or orp, conductivity as well as turbidity. A built-in pressure sensor delivers the depth.

 

WTW 600560 ReaSol KalKit Turbidity Meter 430IR

WTW 600560 Rea/Sol Kal.Kit Turbidity Meter, 430IR

WTW 600560 Rea/Sol Kal.Kit Turbidity Meter, 430IR - The ir measurement is required by din iso, the white light measuring by us epa. Therefore, lab meters for high values are equipped with several measuring options ratio modes calculate the final result from different measured angles. For ratiometric measurements, there is no specific standard method to be followed rather, procedures are established by the application or industry. Nephelometric or transmittance measuring-the nephelometric measurement at 90° scattered light is advantageous for lower turbidity, whereas the transmission measurement at 180° is beneficial for medium to high turbidity values with increasing turbidity, restray and scattering effects between particles are growing bigger. The reduction of light intensity in this case leads to a more accurate result than a 90° nephelometric measurement. White light has a higher sensitivity for small particles, however, the inherent coloration of the solution has a stronger disturbing effect in this case.

 

WTW SenTix 940-3 IDS pH Electrode Non-refillable 3 m Cable

WTW SenTix 940-3 IDS pH Electrode, Non-refillable; 3 m Cable

WTW SenTix 940-3 IDS pH Electrode, Non-refillable; 3 m Cable - Range 0 to 14. Material plastic. Accessory type ph electrode. Description ids ph electrode, non-refillable 3 m cable.

 

WTW 103631 SenTix 21 pH Electrode Epoxy Body Gel Fill 1 m Cable

WTW 103631 SenTix 21 pH Electrode, Epoxy Body, Gel Fill; 1 m Cable

WTW 103631 SenTix 21 pH Electrode, Epoxy Body, Gel Fill; 1 m Cable - Description sentix 21, sealed. A&d balances brand items. Made in germany. 5890850 series product. Wtr 103631 sentix 21 ph electrode, epoxy body, gel fill 1 m cable.

 

WTW 301711 Conductivity Cell TetraCon 925-3 3 m Cable Length

WTW 301711 Conductivity Cell, TetraCon 925-3, 3 m Cable Length

WTW 301711 Conductivity Cell, TetraCon 925-3, 3 m Cable Length - Wtw offers decades of expertise in high quality, rugged conductivity cell technology, and now the new ids conductivity cells build upon this proven technology including the automatic transfer of the cell constant feature to eliminate operation errors.