23 Most Wanted Fumes for 2019

 

Menda 35452 Gas Filter For Solo and Duo Fume Extractor #ad

Menda 35452 Gas Filter, For Solo and Duo Fume Extractor

Menda 35452 Gas Filter, For Solo and Duo Fume Extractor #ad - Surface area 20 square meters. Efficiency h13 99997% at 03. Intended to be used with menda 35450 pre filter. Used to filter out potentially hazardous or noxious fumes and vapors, as well as particulate matter. For use with menda model 35440 and 35445 fume extractors.

 

Menda 35450 Pre-Filter For Solo and Duo Fume Extractor Pack of 5 #ad

Menda 35450 Pre-Filter, For Solo and Duo Fume Extractor (Pack of 5)

Menda 35450 Pre-Filter, For Solo and Duo Fume Extractor (Pack of 5) #ad - Pre-filter for use with the menda 35440 and 35445 fume extractors. The pre-filter is intended to capture larger particulate matter, and should be used with a hepa combined filter to reach greater levels of filtration.

 

Bel-Art H50000-0004 Large Molded Polyethylene Fume Hood with Baffle and Acrylic Sash 42 x 20 x 30 in #ad

Bel-Art H50000-0004 Large Molded Polyethylene Fume Hood with Baffle and Acrylic Sash; 42 x 20 x 30 in.

Bel-Art H50000-0004 Large Molded Polyethylene Fume Hood with Baffle and Acrylic Sash; 42 x 20 x 30 in. #ad - The baffle slopes forward, leaving space beneath for air flow to sweep the deck, and space above in order to efficiently remove airborne vapors. This fume hood is includes a flat internal baffle across the rear of the shell.

 

Purair Advanced Fume Hood - 25 Foot #ad

Purair Advanced Fume Hood – 2.5 Foot

Purair Advanced Fume Hood – 2.5 Foot #ad - Electrical cords and cables are safely routed into the cabinet through ports on the back and side walls a filtered air sampling port allows manual filter monitoring. A continuous air velocity monitoring system alerts the operator upon unacceptable values. Electrostatic pre-filter the a 99. The purair advanced series ductless fume hoods are a series of high efficiency products designed to protect the user and the environment from hazardous vapors generated on the work surface. The pre-filter can be changed while the unit is operating to prevent operator exposure to chemical vapors. Electronic controls and displays include switches for the blower and lights, an electronic hour counter and low airflow alarm,. At the heart of the purair fume hood product line is the innovative air science multiplex filtration technology. Dynamic filtration chamber the dynamic filter chamber prevents any possible leakage of contaminated air by pressurizing the fan plenum (positive air) and depressuring the filter compartment (negative air). Steel support frame the chemical resistant epoxy coated steel frame adds mechanical strength. Filter door key filter access keys prevent unauthorized removal or accidental exposure to dirty filters. Included are analog air velocity meter in the field of vision of the user provides independent backup to the electronic airflow alarm. Double hinged self locking front sash when closed, the cabinet sash protects the operator with 100 fpm airflow. 5% effective electrostatic pre-filter is accessible from inside the chamber to contain the release of any particulates that it traps. Sold separately is one required main filters (astm-001, astm-013, astm-015, astm-030, astm-200, or astm-100 depending on application).

 

Table Top Stand For Ductless Fume Hood #ad

Table Top Stand For Ductless Fume Hood

Table Top Stand For Ductless Fume Hood #ad - 47-4101 / tabletop f/ductless fume hoodproduct details series, 47-4101 series description, tabletop f/ductless fume hood status, in stockproduct categoryreturn period from invoice datefinished jewelry7 daystools, supplies and packaging10 daysall other products20 daysspecial orders (change & create)non-returnablebooks, cd’s and dvd’snon-returnableplease note that customized items are not eligible for returns.

 

OC White 50020 Fume Absorber Exhaust Fan with Carbon Activated Filter Screw Down Base 37 Length #ad

O.C. White 50020 Fume Absorber Exhaust Fan with Carbon Activated Filter, Screw Down Base, 37″ Length

O.C. White 50020 Fume Absorber Exhaust Fan with Carbon Activated Filter, Screw Down Base, 37″ Length #ad - Included with each fixture are replacement activated carbon filters. Our newest exhaust fan combines both fume removal from the work area and a carbon activated filter. All metal construction ensures esd safety over the life of the product. These exhaust fans are mounted on our heavy duty ultraflex arms for dependability, strength and easy movement. Free your bench from having a bulky fume absorber from another manufacturer. Standard finish is black hard coat. Flux fumes are also noxious fumes, causing headaches, nausea and eye irritation. This unit may be positioned easily from either side to keep your work area fume free and uncluttered.

 

Cole-Parmer Ducted Wall Canopy Fume Hood 36 W #ad

Cole-Parmer Ducted Wall Canopy Fume Hood, 36″ W

Cole-Parmer Ducted Wall Canopy Fume Hood, 36″ W #ad - Side panels attach directly to side of hood and help to contain fumes and minimize effects of cross drafts. Note canopy hoods require exhausting to the outside or into existing ventilation. Constructed of chemical-resistant composite materials, these molded, one-piece canopy hoods are lightweight and designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with baths and circulators, small mixers, hot plates, or other equipment. If your application requires hood material of 304 stainless steel, contact our application specialists. Vapor-proof incandescent light fixture 33731-88 adds additional light to your working area and mounts easily to the inside of your canopy. Exhaust blower not included. Wall and corner hoods come with installation hardware. Capture and eliminate contaminated air at the source choose from wall, island, or corner styles. Other rod lengths are available — contact an application specialist for more information. Easily incorporate into existing labs and classrooms. To customize your canopy hood, order clear fiberglass side panels separately below. Island hoods require mounting kit 33731-85 which includes four 10-ft (3 m) long suspension rods.

 

Menda 35445 Portable Duo Fume Extractor Complete Unit Kit 125 CFM with Filter #ad

Menda 35445 Portable Duo Fume Extractor Complete Unit Kit, 125 CFM with Filter

Menda 35445 Portable Duo Fume Extractor Complete Unit Kit, 125 CFM with Filter #ad - The kit includes 1 menda duo extractor with two inlets, two 30″ esd stay put extraction arm with nozzle, two 5′ 50mm flex hose, 2 flip top flush seal mounting plate, 2 table bracket installation kit, 4 jubilee clips, 2 sleeves, 1 black inlet cover, one 6’ power cord, 1 combined filter (hepa), 1 pre-filter. Maximum number of operators 2. Dimensions 15″ height by 10″ width by 10″ depth. Filter indicator light yes, cfm with filter 125. Noise level.

 

Labconco 2247401 Basic Fume Hood Epoxy-Coated Steel 47 Width 220V 50 Hz #ad

Labconco 2247401 Basic Fume Hood, Epoxy-Coated Steel, 47″ Width, 220V, 50 Hz

Labconco 2247401 Basic Fume Hood, Epoxy-Coated Steel, 47″ Width, 220V, 50 Hz #ad - All basic laboratory hoods are constructed of epoxy-coated steel, and are sensible for all areas of work—laboratories with low ceilings or narrow aisles. Labconco basic fume hoods 70″ are one of the best in the market, offering an array of selections for basic chemistry applications where safe ventilation is a must, including light-duty enclosure for nuisance vapors, hood systems for toxic fume ventilation, or a more specialized ventilation system. They have smaller dimensions that are economical with a shorter height and depth than traditional hoods, so they fit in areas with low ceilings or narrow aisles.

 

Worksurface for Clean Aire II Fume Hood - Clean Aire II Ductless Fume Hoods #ad

Worksurface for Clean Aire II Fume Hood – Clean Aire II Ductless Fume Hoods

Worksurface for Clean Aire II Fume Hood – Clean Aire II Ductless Fume Hoods #ad - This self-contained hood unit comes equipped with an integral exhaust blower and carbon filter, which do not require duct or venting to the outside. Small quantities of solvents, acids, and odors are quickly absorbed in an activated carbon filter which recirculates air back into the room, thus avoiding installation and energy cost. Equipped with 115v exhaust blower, vapor proof light switch, and power cord, unit is fully assembled. Filters, worksurface, and base stands are available separately. Hood is ideal for laboratories that require multiple locations or where space is limited.

 

Thermo Shandon Downdraft Grossing Table Grosslab for Pathology Histology Lab Fume Hood with Warranty #ad

Thermo Shandon Downdraft Grossing Table Grosslab for Pathology Histology Lab Fume Hood with Warranty!

Thermo Shandon Downdraft Grossing Table Grosslab for Pathology Histology Lab Fume Hood with Warranty! #ad - The fume extractor should have at least 18 inches of space around the unit to ensure adequate air flow. Replacement parts for items included as part of the menda 35440 fume extractor kit. Flexiable hose that attaches the fume extractor to the arm. The fume extractor should be installed in a well ventilated room. For use with menda model 35440 and 35445 fume extractors.

 

Fireboy-Xintex Xintex Carbon Monoxide Alarm - 1224vdc Power Winterconnect - Black Blower Relay  NONE  Fume Type  N #ad

Fireboy-Xintex Xintex Carbon Monoxide Alarm – 12/24vdc Power W/interconnect – Black Blower Relay = NONE | Fume Type = N

Fireboy-Xintex Xintex Carbon Monoxide Alarm – 12/24vdc Power W/interconnect – Black Blower Relay = NONE | Fume Type = N #ad - Featureselectrochemical sensor, immediate and stable sensing reduces false alarmsultra-low current draw, 1 malong sensor life, approx. Carbon monoxide alarm, 12/24vdc power with interconnect, blackthe xintex cmd5-m co alarm uses a sensor operating with a microprocessor to measure carbon monoxide (co) levels. Cohb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and is expressed as a percentage. The human body absorbs co easier than oxygen and cohb is the ratio of absorbed carbon monoxide to oxygen in the bloodstream. The cmd5-m alarm calculates this cohb as a function of time and determines the appropriate alarm response. 7 year end of life (eol)multiple location warning, all connected cmd5-mi alarms sound togethercompact design for inconspicuous protection, modern design blends in with interior decorbattery operated version requires no power wiring, reduced labor and material costs to installsealed lithium-ion battery, guaranteed 7 year liferelay module available for generator shutdown, one relay module for multiple co alarmsxintex quality and reliability on boardmicroprocessor co. Using a “time weighted average” (twa) process, it monitors co concentration, temperature and time to calculate levels of carboxyhemoglobin (cohb).

 

Bel-Art H50000-0003 Large Molded Polyethylene Fume Hood with Acrylic Sash 42 x 20 x 30 in #ad

Bel-Art H50000-0003 Large Molded Polyethylene Fume Hood with Acrylic Sash; 42 x 20 x 30 in.

Bel-Art H50000-0003 Large Molded Polyethylene Fume Hood with Acrylic Sash; 42 x 20 x 30 in. #ad - Fume hood has a molded, one-piece outer polyethylene shell for durability and chemical-resistance, with a clear acrylic door panel that slides up and down on inside tracks. Large body measures 30 x 20 x 42 inches (h x w x d), with a 142 x 345 inches (h x w) door opening. Clear acrylic door provides visibility. Door positions include open, closed, or intermediate when in closed position, the sash remains slightly open to facilitate continuous air flow. Exhaust stack connection has a 15 cm outer diameter (od) works with an exhaust system (not included) that draws free air at 350 cubic feet per minute (cfm).

 

Menda 35458 Jubilee Clips 50mm Diameter For Fume Extraction #ad

Menda 35458 Jubilee Clips, 50mm Diameter, For Fume Extraction

Menda 35458 Jubilee Clips, 50mm Diameter, For Fume Extraction #ad - Replacement parts for items included as part of the menda 35440 fume extractor kit. The fume extractor should be installed in a well ventilated room. Used to clip the flexiable hose to the sleeve and fume extractor inlet. For use with menda model 35440 and 35445 fume extractors. The fume extractor should have at least 18 inches of space around the unit to ensure adequate air flow.

 

Labconco 3955200 Fume Adsorber with One Organic Carbon Filter 25 Width 115V 60Hz #ad

Labconco 3955200 Fume Adsorber with One Organic Carbon Filter, 2.5′ Width, 115V, 60Hz

Labconco 3955200 Fume Adsorber with One Organic Carbon Filter, 2.5′ Width, 115V, 60Hz #ad - Pre-wired with rear-mounted auxiliary electrical receptacle and top-mounted blower switch with circuit breaker. Glacier white, dry powder, epoxy-coated steel housing with perforated baffle for uniform airflow. Built-in, motorized impeller to provide face velocity up to 35 fpm (fume adsorber-2 models include two impellers). Activated carbon, formaldehyde or ammonia filter (fume adsorber-2 models include two filters). Clear, one-piece, 3/8″ thick, shatter-resistant acrylic canopy.

 

Filter for Purair 5 Ductless Fume Hood GP Plus #ad

Filter for Purair 5 Ductless Fume Hood GP Plus

Filter for Purair 5 Ductless Fume Hood GP Plus #ad - The carolina pledge 100% satisfaction guaranteed all of our products are unconditionally guaranteed if for any reason you are not satisfied with any item, you may return it for a replacement, a refund, or credit it’s that simple. From our beginnings in 1927, carolina biological supply company has grown to become a leading supplier of science teaching materials for all levels of education today, from our headquarters in burlington, north carolina, we serve customers worldwide, including teachers, professors, homeschool educators, hobbyists, and professionals in health and science-related fields. When you shop with carolina, you’re not alone all of our products are backed by unparalleled technical support, available from 8am to 8pm, et, monday-friday contact information (live chat, email, and phone) is provided after placing your order at amazon.

 

Purair Basic P5-48 Ductless Fume Hood 4 Wide #ad

Purair Basic P5-48 Ductless Fume Hood, 4′ Wide

Purair Basic P5-48 Ductless Fume Hood, 4′ Wide #ad - Operates on a standard 110v, 60hz outlet. Carbon and hepa filters available to handle a variety of chemical vapors and/or particulates (sold separately). Easy to operate controls. Includes vapor proof fluorescent lighting, cable pass through ports and low airflow alarm. Not ductwork or make up air requirements.

 

TrippNT 50215 PVC Fume Hood Shelf 36 Width x 8 Height x 5 Depth 3  White #ad

TrippNT 50215 PVC Fume Hood Shelf, 36″ Width x 8″ Height x 5″ Depth, 3 ‘, White

TrippNT 50215 PVC Fume Hood Shelf, 36″ Width x 8″ Height x 5″ Depth, 3 ‘, White #ad - Ideal for use in the hood, contamination box or bench top. 3 foot shelf designed to hold, contain, and store supplies in the hood or on the bench. 36 x 8 x 5 inches (width height depth) 4 pounds. Back cut outs allow laminar flow, keeps items off hood floor or step over smaller items. White pvc plastic construction with open back to allow air flow.

 

TrippNT 50316 Polyethylene Fume Hood Shelf 48 Width x 8 Height x 5 Depth 4 White #ad

TrippNT 50316 Polyethylene Fume Hood Shelf, 48″ Width x 8″ Height x 5″ Depth, 4′, White

TrippNT 50316 Polyethylene Fume Hood Shelf, 48″ Width x 8″ Height x 5″ Depth, 4′, White #ad - White polyethylene plastic construction with open back to allow air flow. Ideal for use in the hood, contamination box or bench top. 4 foot shelf designed to hold, contain, and store supplies in the hood or on the bench. Back cut outs allow laminar flow, keeps items off hood floor or step over smaller items. 48 x 8 x 5 inches (width height depth) 5 pounds.

 

Vented Enclosure Fume Hood - 2 Foot #ad

Vented Enclosure Fume Hood – 2 Foot

Vented Enclosure Fume Hood – 2 Foot #ad - For use with menda model 35440 and 35445 fume extractors. The fume extractor should have at least 18 inches of space around the unit to ensure adequate air flow. External dimensions 24 w x 28 d x 195 inches h. The fume extractor should be installed in a well ventilated room. Flexiable arm used to vaccum fumes and vapors.

 

Fume Hood Box with Horizontal Mount #ad

Fume Hood Box with Horizontal Mount

Fume Hood Box with Horizontal Mount #ad - A hepa filter (sold separately) can be added for particulate control. Filter is selected based on application. The filter clamps tightly against the filter gasket to prevent filter bypass and to maintain filter integrity the fume box maintains a constant face velocity of 100 fpm in compliance with u. Clean, filtered air is returned to the laboratory, eliminating the need for external ducting and minimizing loss of treated, conditioned air from the facility. And international standards for safety and performance. The main filter is easy to replace. A clear viewing enclosure prevents chemical splash. A. The activated carbon filter (sold separately) adsorbs organic odors and hazardous vapors such as xylene and toluene. The unit offers a low-profile design thats completely portable. The modular design permits multiple configurations. No ductwork is required. S. The compact size is easily positioned on shallow countertops or counters with overhanging wall cabinets. The fume box utilizes the exclusive air science multiplex filtration system, a unique configurationthat includes a pre-filter and main filter to create a chemical, physical or combination architecture to adsorb, neutralize or trap the target chemical or particulate while constant negative pressure removes vapors and particulates from the user’s breathing zone. Filters which fit this unit are ap60h-001, ap60h-015, or ap60h-030. Construction is white epoxy-coated steel with blue enclosure and clear sides and top panels. Air science fume box ductless enclosures are designed to protect the user from chemicals, vapors or powders during low-volume chemical manipulations by effectively containing low concentrations of noxious fumes, vapors or powders.

 

6 Laboratory Chemical Fume Hood Enclosure to vent hazardous or toxic fumes vapors or dusts #ad

6′ Laboratory Chemical Fume Hood Enclosure to vent hazardous or toxic fumes, vapors or dusts

6′ Laboratory Chemical Fume Hood Enclosure to vent hazardous or toxic fumes, vapors or dusts #ad - Made in the usa. Dual glass sash / both veritical and horizontal moving sash. 3′ flammable storage cabinet & 3′ acid storage cabinet both with epoxy powder coated paint to match fume hood. Epoxy work surface / chemical resistant black work surface. Gas and water service valves ( more valves can be added), dual outlet and interior led light.

 

Purair Basic P5-24 Ductless Fume Hood 2 Wide #ad

Purair Basic P5-24 Ductless Fume Hood, 2′ Wide

Purair Basic P5-24 Ductless Fume Hood, 2′ Wide #ad - Not ductwork or make up air requirements. Easy to operate controls. Includes vapor proof fluorescent lighting, cable pass through ports and low airflow alarm. Operates on a standard 110v, 60hz outlet. Carbon and hepa filters available to handle a variety of chemical vapors and/or particulates (sold separately).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.