22 Greatest Hptlcs for 2020

 

iChromatography UnibondTM Amino F Hptlc 150Um 10X10Cm 25 PlatesBox 22077 22077 #ad

iChromatography Unibond(TM) Amino F Hptlc 150Um 10X10Cm (25 Plates/Box) 22077 22077

iChromatography Unibond(TM) Amino F Hptlc 150Um 10X10Cm (25 Plates/Box) 22077 22077 #ad - The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. 5 cm from the bottom edge of the plate and 0. Typically, sample volumes for high performance tlc are less than one microliter. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. Samples are spotted 1. 5 cm apart. High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. 0 to 1. 3 to 0. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. Samples spots are normally smaller than one millimeter in diameter.

 

iChromatography Hptlc-Ghlf 150Um 10X20Cm Scored 25 PlatesBox 57527 57527 #ad

iChromatography Hptlc-Ghlf 150Um 10X20Cm Scored (25 Plates/Box) 57527 57527

iChromatography Hptlc-Ghlf 150Um 10X20Cm Scored (25 Plates/Box) 57527 57527 #ad - Typically, sample volumes for high performance tlc are less than one microliter. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. Samples spots are normally smaller than one millimeter in diameter. Samples are spotted 1. 3 to 0. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. 0 to 1. 5 cm from the bottom edge of the plate and 0. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. 5 cm apart.

 

iChromatography Hptlc-Hlf 150Um 10X10Cm WPreadsorbent Zone 25 PlatesBox 61077 61077 #ad

iChromatography Hptlc-Hlf 150Um 10X10Cm W/Preadsorbent Zone (25 Plates/Box) 61077 61077

iChromatography Hptlc-Hlf 150Um 10X10Cm W/Preadsorbent Zone (25 Plates/Box) 61077 61077 #ad - Samples are spotted 1. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. 5 cm from the bottom edge of the plate and 0. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. 3 to 0. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. 5 cm apart. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. Typically, sample volumes for high performance tlc are less than one microliter. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. 0 to 1. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. Samples spots are normally smaller than one millimeter in diameter.

 

Analtech P09017 HPTLC-RP8F UNIPLATE 150µm Pack of 25 #ad

Analtech P09017 HPTLC-RP8F UNIPLATE, 150µm (Pack of 25)

Analtech P09017 HPTLC-RP8F UNIPLATE, 150µm (Pack of 25) #ad - A hydrocarbon impregnated layer, similar to the analytical rps uniplate, offers complete aqueous solvent compatibility. Wettability is correspondingly higher with the slightly more polar shorter chain rp series plates. These reversed phase adsorbents share the features and benefits of silica gel hptlc plates high efficiency adsorbents, 150 μm layer thickness, and smooth surface for densitometry. Three nonpolar bonded supports in the unibond series are available rp2, rp8, and rp18. The availability of both normal phase and reversed phase hptlc uniplates completes hptlc as a sensible, efficient and cost effective alternative technique for quantitative analysis. However, due to the extreme hydrophobic nature of the rp18 adsorbent, aqueous wettability is limited to approximately 60% water in the mobile phase. In the high performance format, analtech offers several varieties of supports. These fully silanized silica gels share complete compatibility with all organic solvents.

 

Analtech 58077 Uniplates 10x10cmHPTLC150um Thick10um Particle 25Pk #ad

Analtech 58077 Uniplates, 10x10cm/HPTLC/150um Thick/10um Particle; 25/Pk

Analtech 58077 Uniplates, 10x10cm/HPTLC/150um Thick/10um Particle; 25/Pk #ad - Select the perfect analytical plates for your application. Choose plates with or without an acid stable fluorescent indicator (uv 254 nm). Efficient separations — economically. Reversed phase plates use a readily removed nonpolar adsorbent — hydrocarbon-impregnated silica. These tlc plates combine top-quality adsorbents, consistent manufacturing, rigid qc, and careful packaging-thee results of 40 years of experience dedicated to thin layer techniques. Scored plates snap apart evenly to facilitate single-use separations or screening.

 

iChromatography Hptlc-Hlf 150Um 10X20Cm Low Form WPreadsorbent Zone 25 PlatesBox 61027 61027 #ad

iChromatography Hptlc-Hlf 150Um 10X20Cm (Low Form) W/Preadsorbent Zone (25 Plates/Box) 61027 61027

iChromatography Hptlc-Hlf 150Um 10X20Cm (Low Form) W/Preadsorbent Zone (25 Plates/Box) 61027 61027 #ad - High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. 0 to 1. 3 to 0. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. 5 cm from the bottom edge of the plate and 0. 5 cm apart. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. Typically, sample volumes for high performance tlc are less than one microliter. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. Samples spots are normally smaller than one millimeter in diameter. Samples are spotted 1. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision.

 

iChromatography Hptlc-Hl 150Um 10X20Cm Scored 25 PlatesBox 58527 58527 #ad

iChromatography Hptlc-Hl 150Um 10X20Cm Scored (25 Plates/Box) 58527 58527

iChromatography Hptlc-Hl 150Um 10X20Cm Scored (25 Plates/Box) 58527 58527 #ad - High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. Samples are spotted 1. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. 0 to 1. 5 cm from the bottom edge of the plate and 0. Typically, sample volumes for high performance tlc are less than one microliter. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. 3 to 0. Samples spots are normally smaller than one millimeter in diameter. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. 5 cm apart.

 

iChromatography Hptlc-Ghl 150Um 10X20Cm Scored 25 PlatesBox 56527 56527 #ad

iChromatography Hptlc-Ghl 150Um 10X20Cm Scored (25 Plates/Box) 56527 56527

iChromatography Hptlc-Ghl 150Um 10X20Cm Scored (25 Plates/Box) 56527 56527 #ad - 0 to 1. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. Typically, sample volumes for high performance tlc are less than one microliter. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. Samples are spotted 1. Samples spots are normally smaller than one millimeter in diameter. 5 cm apart. 5 cm from the bottom edge of the plate and 0. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. 3 to 0.

 

Analtech 58527 Uniplates 10x20cmScoredHPTLC150um Thick10um Particle 25Pk #ad

Analtech 58527 Uniplates, 10x20cm/Scored/HPTLC/150um Thick/10um Particle; 25/Pk

Analtech 58527 Uniplates, 10x20cm/Scored/HPTLC/150um Thick/10um Particle; 25/Pk #ad - Select the perfect analytical plates for your application. Efficient separations — economically. Choose plates with or without an acid stable fluorescent indicator (uv 254 nm). These tlc plates combine top-quality adsorbents, consistent manufacturing, rigid qc, and careful packaging-thee results of 40 years of experience dedicated to thin layer techniques. Scored plates snap apart evenly to facilitate single-use separations or screening. Reversed phase plates use a readily removed nonpolar adsorbent — hydrocarbon-impregnated silica.

 

HPTLC Silica gel 60 F254 20 Aluminium sheets 5 x 75 cm #ad

HPTLC Silica gel 60 F254 20 Aluminium sheets 5 x 7.5 cm

HPTLC Silica gel 60 F254 20 Aluminium sheets 5 x 7.5 cm #ad - Emd millipore’s hptlc silica plates work three times faster than conventional tlc plates – and they’re more sensitive. Hs code 3822 00 00. Hptlc plates deliver fast and quantitative analysis of complex samples for manual or automated use. The particle sizes range in hptlc is between 4-8µm, which creates a smoother surface and a higher separation power than tlc plates.

 

iChromatography Hptlc-Rp18F 150Um 10X20Cm Scored 25 PlatesBox 63527 63527 #ad

iChromatography Hptlc-Rp18F 150Um 10X20Cm Scored (25 Plates/Box) 63527 63527

iChromatography Hptlc-Rp18F 150Um 10X20Cm Scored (25 Plates/Box) 63527 63527 #ad - A hydrocarbon impregnated layer, similar to the analytical rps uniplate, offers complete aqueous solvent compatibility. These fully silanized silica gels share complete compatibility with all organic solvents. The availability of both normal phase and reversed phase hptlc uniplates completes hptlc as a sensible, efficient and cost effective alternative technique for quantitative analysis. Selectivity can be varied for a given sample by choosing a unibond reversed phase hptlc plate of proper nonpolarity. In the high performance format, analtech offers several varieties of supports. These reversed phase adsorbents share the features and benefits of silica gel hptlc plates high efficiency adsorbents, 150 ìm layer thickness, and smooth surface for densitometry. Three nonpolar bonded supports in the unibond series are available rp2, rp8, and rp18. Wettability is correspondingly higher with the slightly more polar shorter chain rp series plates. However, due to the extreme hydrophobic nature of the rp18 adsorbent, aqueous wettability is limited to approximately 60% water in the mobile phase.

 

HPTLC 2-Plate Rack - 80-02 - EACH #ad

HPTLC 2-Plate Rack – 80-02 – EACH

HPTLC 2-Plate Rack – 80-02 – EACH #ad - Highly pure, exhibiting minimal background even with medium-polar solvent systems. Identical separation performance to the related hptlc plate product. Analtech, inc.

 

iChromatography Hptlc-Hl 150Um 10X20Cm 25 PlatesBox 58027 58027 #ad

iChromatography Hptlc-Hl 150Um 10X20Cm (25 Plates/Box) 58027 58027

iChromatography Hptlc-Hl 150Um 10X20Cm (25 Plates/Box) 58027 58027 #ad - Samples are spotted 1. 5 cm apart. 3 to 0. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. 0 to 1. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. Samples spots are normally smaller than one millimeter in diameter. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. Typically, sample volumes for high performance tlc are less than one microliter. High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. 5 cm from the bottom edge of the plate and 0.

 

iChromatography Hptlc-Rp18 150Um 10X20Cm 25 PlatesBox 62027 62027 #ad

iChromatography Hptlc-Rp18 150Um 10X20Cm (25 Plates/Box) 62027 62027

iChromatography Hptlc-Rp18 150Um 10X20Cm (25 Plates/Box) 62027 62027 #ad - These fully silanized silica gels share complete compatibility with all organic solvents. Selectivity can be varied for a given sample by choosing a unibond reversed phase hptlc plate of proper nonpolarity. Three nonpolar bonded supports in the unibond series are available rp2, rp8, and rp18. These reversed phase adsorbents share the features and benefits of silica gel hptlc plates high efficiency adsorbents, 150 ìm layer thickness, and smooth surface for densitometry. In the high performance format, analtech offers several varieties of supports. Wettability is correspondingly higher with the slightly more polar shorter chain rp series plates. A hydrocarbon impregnated layer, similar to the analytical rps uniplate, offers complete aqueous solvent compatibility. However, due to the extreme hydrophobic nature of the rp18 adsorbent, aqueous wettability is limited to approximately 60% water in the mobile phase. The availability of both normal phase and reversed phase hptlc uniplates completes hptlc as a sensible, efficient and cost effective alternative technique for quantitative analysis.

 

Analtech 59527 Uniplates 10x20cmUVScoredHPTLC150um Thick10um Particle 25Pk #ad

Analtech 59527 Uniplates, 10x20cm/UV/Scored/HPTLC/150um Thick/10um Particle; 25/Pk

Analtech 59527 Uniplates, 10x20cm/UV/Scored/HPTLC/150um Thick/10um Particle; 25/Pk #ad - These tlc plates combine top-quality adsorbents, consistent manufacturing, rigid qc, and careful packaging-thee results of 40 years of experience dedicated to thin layer techniques. Select the perfect analytical plates for your application. Scored plates snap apart evenly to facilitate single-use separations or screening. Choose plates with or without an acid stable fluorescent indicator (uv 254 nm). Efficient separations — economically. Reversed phase plates use a readily removed nonpolar adsorbent — hydrocarbon-impregnated silica.

 

iChromatography Hptlc-Ghlf 150Um 10X10Cm Scored 5X5Cm 25 PlatesBox 57377 57377 #ad

iChromatography Hptlc-Ghlf 150Um 10X10Cm Scored (5X5Cm) (25 Plates/Box) 57377 57377

iChromatography Hptlc-Ghlf 150Um 10X10Cm Scored (5X5Cm) (25 Plates/Box) 57377 57377 #ad - Samples spots are normally smaller than one millimeter in diameter. 5 cm apart. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. Samples are spotted 1. High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. 0 to 1. 3 to 0. 5 cm from the bottom edge of the plate and 0. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. Typically, sample volumes for high performance tlc are less than one microliter. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques.

 

iChromatography Hptlc-Hlf 150Um 20X10Cm High Form WPreadsorbent Zone 25 PlatesBox 61127 61127 #ad

iChromatography Hptlc-Hlf 150Um 20X10Cm (High Form) W/Preadsorbent Zone (25 Plates/Box) 61127 61127

iChromatography Hptlc-Hlf 150Um 20X10Cm (High Form) W/Preadsorbent Zone (25 Plates/Box) 61127 61127 #ad - 5 cm from the bottom edge of the plate and 0. Samples spots are normally smaller than one millimeter in diameter. High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. 5 cm apart. Typically, sample volumes for high performance tlc are less than one microliter. 0 to 1. Samples are spotted 1. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. 3 to 0. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques.

 

HPTLCGlass S160 254 - 1056290001 - EACH #ad

HPTLC/Glass S160 254 – 1.05629.0001 – EACH

HPTLC/Glass S160 254 – 1.05629.0001 – EACH #ad - Emd chemical. Analtech, inc. Analtech, inc.

 

iChromatography Hptlc-Ghl 150Um 10X10Cm Scored 5X5Cm 25 PlatesBox 56377 56377 #ad

iChromatography Hptlc-Ghl 150Um 10X10Cm Scored (5X5Cm) (25 Plates/Box) 56377 56377

iChromatography Hptlc-Ghl 150Um 10X10Cm Scored (5X5Cm) (25 Plates/Box) 56377 56377 #ad - Samples are spotted 1. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. 3 to 0. High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. 0 to 1. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. Samples spots are normally smaller than one millimeter in diameter. Typically, sample volumes for high performance tlc are less than one microliter. 5 cm from the bottom edge of the plate and 0. 5 cm apart.

 

HPTLC Silica gel 60 F254 Multiformat pre-scored to 5 x 5 cm ex Glass plates 10 x 10 cm #ad

HPTLC Silica gel 60 F254 Multiformat pre-scored to 5 x 5 cm ex Glass plates 10 x 10 cm

HPTLC Silica gel 60 F254 Multiformat pre-scored to 5 x 5 cm ex Glass plates 10 x 10 cm #ad - Identical separation performance to the related hptlc plate product. Highly pure, exhibiting minimal background even with medium-polar solvent systems. Especially suited for pharmacopeial applications.

 

iChromatography Hptlc-Hlf 150Um 10X20Cm Scored 25 PlatesBox 59527 59527 #ad

iChromatography Hptlc-Hlf 150Um 10X20Cm Scored (25 Plates/Box) 59527 59527

iChromatography Hptlc-Hlf 150Um 10X20Cm Scored (25 Plates/Box) 59527 59527 #ad - High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. 5 cm apart. Since smaller samples are applied, one 10 x 10 cm plate can separate as many samples as can be separated on a 20 x 20 cm plate using standard tlc techinques. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. The adosrbent layers are only 150 microns thick, resulting in a more rapid solvent migration. 0 to 1. The smooth homogeneous surface of hptlc uniplates gives high signal-to-noise ratios for densitometric scanning, this increasing sensitivity and precision. High efficiency 8 micron (ave) adsorbent with narrow particle and pore distribution 150 microns asdorbent layer thickness for fast separations homogeneous layer allows linear or radial separations smooth adsorbent surface for noise free densitometry. Typically, sample volumes for high performance tlc are less than one microliter. 3 to 0. 5 cm from the bottom edge of the plate and 0. Samples spots are normally smaller than one millimeter in diameter. Samples are spotted 1.

 

Analtech P61077 HPTLC-HLF with Preadsorbent Zone 150 µm 100 mm Wide 100 mm Length Pack of 25 #ad

Analtech P61077 HPTLC-HLF with Preadsorbent Zone, 150 µm, 100 mm Wide, 100 mm Length (Pack of 25)

Analtech P61077 HPTLC-HLF with Preadsorbent Zone, 150 µm, 100 mm Wide, 100 mm Length (Pack of 25) #ad - Samples spots are normally smaller than one millimeter in diameter. The adsorbent capacity is more than adequate for small samples used in high performance tlc techniques. High performance uniplates provide high resolution separations in less than five minutes with migration distances as little as 5 to 7 cm. These plates are prepared with high efficiency silica gel having a 10 micron average particle diameter and narrow particle size distribution. Typically, sample volumes for high performance tlc are less than one microliter. The adsorbent layers are only 150 microns thick, resulting in a more rapid solvent migration.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.