21 Top Vacuum Traps for 2019

 

Laboy HMV010118 Glass Vacuum Trap with 10 mm Serrated Hose 250 mm Length Below The 4050 Joint #ad

Laboy HMV010118 Glass Vacuum Trap with 10 mm Serrated Hose 250 mm Length Below The 40/50 Joint

Laboy HMV010118 Glass Vacuum Trap with 10 mm Serrated Hose 250 mm Length Below The 40/50 Joint #ad - Vacuum trap, also called cold trap, is used to condense all vapors except the permanent gases into a liquid or solid. Serrated hose connections for side tube have an o. Of 13mm at the smallest serration and 16mm at the largest serration. D. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. With joint for easy removal of condense.

 

Laboy HMV010201 Glass Vacuum Trap with 3520 Ball Joints 50 mm Body OD250 mm Length Below 4550 Joint #ad

Laboy HMV010201 Glass Vacuum Trap with 35/20 Ball Joints 50 mm Body O.D.250 mm Length Below 45/50 Joint

Laboy HMV010201 Glass Vacuum Trap with 35/20 Ball Joints 50 mm Body O.D.250 mm Length Below 45/50 Joint #ad - Please order the pump adapter and socket clamp separately. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. Laboy glassware are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling. Vacuum trap, also called cold trap, is used to condense all vapors except the permanent gases into a liquid or solid. With joint for easy removal of condense. For use with vacuum manifolds having 35/20 socket joints.

 

VACUUM TRAP DEWAR TYPE G 500ML #ad

VACUUM TRAP DEWAR TYPE G 500ML

VACUUM TRAP DEWAR TYPE G 500ML #ad - Vacuum trap, dewar type, synthware, capacity 500ml, stopcock glass, stopcock bore 4mm.

 

Across International T40110 AI  Cold Trap for Safe Vacuum Operations with Ovens -40 Degree F #ad

Across International T40.110 AI Cold Trap for Safe Vacuum Operations with Ovens, -40 Degree F

Across International T40.110 AI Cold Trap for Safe Vacuum Operations with Ovens, -40 Degree F #ad - Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back-stream into the cavity. Features, no dry ice or liquid nitrogen needed, all steel construction for durability, small footprint, plug and play, no assembly required. Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.

 

Laboy HMV010212 Glass Vacuum Trap with 4550 Joint 250 mm Length Below Joint 22 mm Tube OD #ad

Laboy HMV010212 Glass Vacuum Trap with 45/50 Joint 250 mm Length Below Joint 22 mm Tube O.D.

Laboy HMV010212 Glass Vacuum Trap with 45/50 Joint 250 mm Length Below Joint 22 mm Tube O.D. #ad - Beijing weichengya laboratory equipment co. Body length is measured below the joint. With joints for easy removal of condensate. Was founded in 1999, focusing on the research, development, manufacture, sale and after-sales service of laboratory equipment. , Ltd.

 

Goldleaf Scientific Large Dewar Style Vacuum Trap w 2440 Standard Joint Size #ad

Goldleaf Scientific Large Dewar Style Vacuum Trap w/ 24/40 Standard Joint Size

Goldleaf Scientific Large Dewar Style Vacuum Trap w/ 24/40 Standard Joint Size #ad - If your vacuum pump ingests vapor it can be detrimental to performance and longevity of the pump. A vacuum trap or “cold trap” is used to prevent vapors from entering your vacuum pump and contaminating your vacuum pump oil. Simply insert dry ice into the middle section. Intake hose barb is on the bottom and output is near the top. Large dewar style vacuum trap. It is crucial to protect your vacuum pump in order to reach and maintain the required vacuum level, and prevent costly and unnecessary oil changes. Condensed vapors are dropped into separate flask for collecting large amounts of solvent or volatile compounds.

 

Goldleaf Scientific - Vacuum Cold Trap with 10mm Serrated Hose Barbs 225mm Length Below the 3445 Joint #ad

Goldleaf Scientific – Vacuum Cold Trap with 10mm Serrated Hose Barbs & 225mm Length Below the 34/45 Joint

Goldleaf Scientific – Vacuum Cold Trap with 10mm Serrated Hose Barbs & 225mm Length Below the 34/45 Joint #ad - It is crucial to protect your vacuum pump in order to reach and maintain the required vacuum level, and prevent costly and unnecessary oil changes. A vacuum trap or “cold trap” is used to prevent vapors from entering your vacuum pump and contaminating your vacuum pump oil. If your vacuum pump ingests vapor it can be detrimental to performance and longevity of the pump.

 

Chemglass CG-4516-02  Series CG-4516 Vacuum Trap Stopper 2942 Joint #ad

Chemglass CG-4516-02 Series CG-4516 Vacuum Trap Stopper, 29/42 Joint

Chemglass CG-4516-02 Series CG-4516 Vacuum Trap Stopper, 29/42 Joint #ad - Similar to cg-4514, but with the top inlet tube bent at a 90° angle. , 29/42 joint, sold in each, manufactured by chemglass.

 

Laboy HMV010117 Glass Vacuum Trap with 10 mm Serrated Hose 225 mm Length Below The 3445 Joint #ad

Laboy HMV010117 Glass Vacuum Trap with 10 mm Serrated Hose 225 mm Length Below The 34/45 Joint

Laboy HMV010117 Glass Vacuum Trap with 10 mm Serrated Hose 225 mm Length Below The 34/45 Joint #ad - With joint for easy removal of condense. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. Vacuum trap, also called cold trap, is used to condense all vapors except the permanent gases into a liquid or solid. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling. Of 13mm at the smallest serration and 16mm at the largest serration. Serrated hose connections for side tube have an o. D.

 

Chemglass CG-4519-01 Complete Plastic Coated Vacuum Trap For Large Volume Solvent Vapor #ad

Chemglass CG-4519-01 Complete Plastic Coated Vacuum Trap, For Large Volume Solvent Vapor

Chemglass CG-4519-01 Complete Plastic Coated Vacuum Trap, For Large Volume Solvent Vapor #ad - Plastic coated to contain solvent in case of breakage and supplied complete with a uhmw lid with handle. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump. Trap is designed for large volume solvent vapor removal during rotary evaporation.

 

2 Quart Resin Trap Vacuum Degassing Chamber #ad

2 Quart Resin Trap/ Vacuum & Degassing Chamber

2 Quart Resin Trap/ Vacuum & Degassing Chamber #ad - 5 gallon high strength stainless steel chamber • (1) industrial grade silicone gasket -gasket can withstand 390f max temp. 5hg) at sea level • (1) leak free nickel plated air manifold -vacuum release valve and vacuum connect valve • (1) 1/4 female flare universal pump adapter for vacuum hose • (1) 5ft clear steel reinforced vacuum hose • (1) 8″x8″ platinum cured silicone non stick vacpad® • (1) 50 micron air filter. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit maximum operational temperature to 160f. Every chamber is tested prior to shipping to lose no more than 2. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. This is a complete bestvaluevac® vacuum chamber setup designed built and 100% tested in chicago, illinois. The maximum allowed temperature of this chamber is 160f. 5hg/24hrs. No adhesives are used our simple gasket design even allows you to place the lid on the chamber somewhat off center and still pull a full vacuum. With our unique patent pending gasket design (utility patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. -60a durometer density • (1) glycerin filled vacuum gauge (must be regulated upon arrival) -max vacuum -29hg (+/-. This is a feature that most other vacuum chambers do not offer. This kit includes • (1) 1.

 

Goldleaf Scientific Vacuum Cold Trap w 10mm Serrated Hose 250mm Length Below the 4550 Joint #ad

Goldleaf Scientific Vacuum Cold Trap w/ 10mm Serrated Hose, 250mm Length Below the 45/50 Joint

Goldleaf Scientific Vacuum Cold Trap w/ 10mm Serrated Hose, 250mm Length Below the 45/50 Joint #ad - If your vacuum pump ingests vapor it can be detrimental to performance and longevity of the pump. It is crucial to protect your vacuum pump in order to reach and maintain the required vacuum level, and prevent costly and unnecessary oil changes. A vacuum trap or “cold trap” is used to prevent vapors from entering your vacuum pump and contaminating your vacuum pump oil.

 

Chemglass CG-4517-02  Series CG-4517 Vacuum Trap Dewar Type PTFE Stopcock 1000 mL Reservoir 85 mm Inner Chamber ID 300 mm Inner Chamber Depth 650 mm Height 120 mm Width #ad

Chemglass CG-4517-02 Series CG-4517 Vacuum Trap, Dewar Type, PTFE Stopcock, 1000 mL Reservoir, 85 mm Inner Chamber ID, 300 mm Inner Chamber Depth, 650 mm Height, 120 mm Width

Chemglass CG-4517-02 Series CG-4517 Vacuum Trap, Dewar Type, PTFE Stopcock, 1000 mL Reservoir, 85 mm Inner Chamber ID, 300 mm Inner Chamber Depth, 650 mm Height, 120 mm Width #ad - Lower reservoir has a capacity of either 500 or 1000ml, with a 4mm ptfe stopcock. Serrated hose connections are 12mm at the smallest serration and 14mm at the largest serration. Dry ice, dewar style trap condenser designed for large volume solvent removal. Optional uhmw lid prevents evaporation of dry ice/acetone in trap.

 

Chemglass CG-4515-01 Complete Serrated Hose Connection Vacuum Trap with 2942 Joint 32mm OD x 200mm Overall Length #ad

Chemglass CG-4515-01 Complete Serrated Hose Connection Vacuum Trap with 29/42 Joint, 32mm OD x 200mm Overall Length

Chemglass CG-4515-01 Complete Serrated Hose Connection Vacuum Trap with 29/42 Joint, 32mm OD x 200mm Overall Length #ad - Two piece construction for easy removal of condensate. D. Inlet and outlet are 180° apart for installation into a variety of vacuum systems. Serrated hose connections have an o. Of 13mm at the smallest serration and 16mm at the largest serration. Stopper has a standard taper inner joint and body has an outer joint. Body length is the overall length from the top of the joint to the bottom of the round bottom.

 

Chemglass Glass 500mL Vacuum Trap 130mm W x 360mm H Body and Stopper Only #ad

Chemglass Glass 500mL Vacuum Trap 130mm W x 360mm H Body and Stopper Only

Chemglass Glass 500mL Vacuum Trap 130mm W x 360mm H Body and Stopper Only #ad -   This product can not be intended for use in either human or animal food manufacturing processes or related purposes. Thorough cleaning and sterilization are recommended before use. Biotech bargains california chemglass glass 500ml vacuum trap 130mm w x 360mm h body and stopper onlyno cracks or chips. 9.  _gsrx_vers_627 (gs 6. 8b2 (627)). #40 o-ring  (cg-305-226) and clamp (cg-150-09) not included.

 

Labconco 7538400 Dry Ice Secondary Vacuum Trap 78 Height x 66 Diameter 12 OD Connection Type 200ml Capacity #ad

Labconco 7538400 Dry Ice Secondary Vacuum Trap, 7.8″ Height x 6.6″ Diameter, 1/2″ OD Connection Type, 200ml Capacity

Labconco 7538400 Dry Ice Secondary Vacuum Trap, 7.8″ Height x 6.6″ Diameter, 1/2″ OD Connection Type, 200ml Capacity #ad - For processing samples with low eutectic points. Simply connect a sample directly to the incoming port and add a vacuum pump to the outgoing port. An insulated well, when dry ice and solvent are added, cools to approximately -75° c (-103° f). Trap connects in series with a freeze dry system or vacuum evaporation system and vacuum pump to prevent contaminants from migrating into the vacuum pump. Dry ice and solvent, such as alcohol, are required (not included). When used alone, dry ice secondary trap may serve as an inexpensive collector.

 

Chemglass CG-4530-01 Complete Vacuum Trap #ad

Chemglass CG-4530-01 Complete Vacuum Trap

Chemglass CG-4530-01 Complete Vacuum Trap #ad - The unique design of the stopper decreases the chance of freezing by allowing vapor to pass through the holes in the side of the inner tube. The 55/50 standard taper joint connects the trap body with the stopper. Hose connections are 15mm od at the largest serration. Trap is designed for high volume solvent removal by vacuum.

 

Chemglass CG-4515-03 Complete Serrated Hose Connection Vacuum Trap with 4050 Joint 45mm OD x 250mm Overall Length #ad

Chemglass CG-4515-03 Complete Serrated Hose Connection Vacuum Trap with 40/50 Joint, 45mm OD x 250mm Overall Length

Chemglass CG-4515-03 Complete Serrated Hose Connection Vacuum Trap with 40/50 Joint, 45mm OD x 250mm Overall Length #ad - Of 13mm at the smallest serration and 16mm at the largest serration. Body length is the overall length from the top of the joint to the bottom of the round bottom. Inlet and outlet are 180° apart for installation into a variety of vacuum systems. Two piece construction for easy removal of condensate. Serrated hose connections have an o. Stopper has a standard taper inner joint and body has an outer joint. D.

 

Chemglass CG-4513-20  Series CG-4513 Vacuum Trap Lower Body O-Ring Style 30 O-Ring Joint #ad

Chemglass CG-4513-20 Series CG-4513 Vacuum Trap Lower Body, O-Ring Style, #30 O-Ring Joint

Chemglass CG-4513-20 Series CG-4513 Vacuum Trap Lower Body, O-Ring Style, #30 O-Ring Joint #ad - Pinch clamp. Complete trap is supplied with a stopper, lower body, viton o-ring, and uses. Serrated hose connections are 13. 5mm at the smallest serration and 15. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Similar to cg-4515 traps but having an o-ring joint to connect the trap body to the stopper. 5mm at the largest serration.

 

Laboy HMV010116 Glass Vacuum Trap with 10 mm Serrated Hose 200 mm Length Below The 2942 Joint #ad

Laboy HMV010116 Glass Vacuum Trap with 10 mm Serrated Hose 200 mm Length Below The 29/42 Joint

Laboy HMV010116 Glass Vacuum Trap with 10 mm Serrated Hose 200 mm Length Below The 29/42 Joint #ad - With joint for easy removal of condense. D. Of 13mm at the smallest serration and 16mm at the largest serration. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. Vacuum trap, also called cold trap, is used to condense all vapors except the permanent gases into a liquid or solid. Serrated hose connections for side tube have an o. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.

 

VACUUM TRAP DEWAR TYPE G 1L #ad

VACUUM TRAP DEWAR TYPE G 1L

VACUUM TRAP DEWAR TYPE G 1L #ad - Vacuum trap, dewar type, synthware, capacity 1000ml, stopcock glass, stopcock bore 4mm.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.