21 Coolest Hybridization Bottles in 2019

 

Chemglass CG-1140-08 Series CG-1140 Series GL-45 Hybridization Bottle 35 mm Diameter 300 mm Height Red Cap Dual Chamber

Chemglass CG-1140-08 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 300 mm Height, Red Cap, Dual Chamber

Chemglass CG-1140-08 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 300 mm Height, Red Cap, Dual Chamber - Heavy wall bottle used in hybridization incubators or ovens with rotators. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. The red plastic cap has a ptfe faced liner and a working temperature of 180°c. The blue cap has a silicone sealing ring and a working temperature of 140°c. Dual chamber bottle has a capped opening at each end with a solid glass wall in the center to divide the bottle into two equal compartments. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions.

 

Thermo Scientific M107625Q Labquake Rotisserie Hybridization Rotator 8rpm Fixed Speed 120V For 4 38 x 300mm Large Hybridization Bottles or 8 50mL Conical or Centrifuge Tubes

Thermo Scientific M107625Q Labquake Rotisserie Hybridization Rotator, 8rpm Fixed Speed, 120V, For (4) 38 x 300mm Large Hybridization Bottles or (8) 50mL Conical or Centrifuge Tubes

Thermo Scientific M107625Q Labquake Rotisserie Hybridization Rotator, 8rpm Fixed Speed, 120V, For (4) 38 x 300mm Large Hybridization Bottles or (8) 50mL Conical or Centrifuge Tubes - Bottles and tubes can be loaded or removed without shutting down motor. Aluminum shaft with polypropylene holder has both small and large slots for easy bottle and tube placement and removal. Holds four 38 x 300mm small hybridization bottles or eight 50ml conical or centrifuge tubes. Tri-directional rotation assures optimal distribution of a minimal amount of probe solution. Benchtop analog rotisserie uses 120v to rotate conical tubes or hybridization bottles at a constant speed of 8rpm for thorough mixing.

 

Chemglass CG-1140-03 Series CG-1140 Series GL-45 Hybridization Bottle 35 mm Diameter 150 mm Height Red Cap

Chemglass CG-1140-03 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 150 mm Height, Red Cap

Chemglass CG-1140-03 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 150 mm Height, Red Cap - Heavy wall bottle used in hybridization incubators or ovens with rotators. Dual chamber bottle has a capped opening at each end with a solid glass wall in the center to divide the bottle into two equal compartments. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. The red plastic cap has a ptfe faced liner and a working temperature of 180°c. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. The blue cap has a silicone sealing ring and a working temperature of 140°c.

 

Labnet ProBlot B3003-PC Borosilicate Glass Large Hybridization Bottle Plastic Coated 300mm Height x 35mm Width

Labnet ProBlot B3003-PC Borosilicate Glass Large Hybridization Bottle, Plastic Coated, 300mm Height x 35mm Width

Labnet ProBlot B3003-PC Borosilicate Glass Large Hybridization Bottle, Plastic Coated, 300mm Height x 35mm Width - The seals fit tightly into the caps and will not fall out when the caps are removed from the bottles. The high temperature caps have a rugged ptfe seal for leak-proof performance, even after prolonged use. Labnet’s problot hybridization bottles are constructed of high quality borosilicate glass which meets or exceeds the requirements for class i, type a glass of astm 438. Heavy walled, the bottles block >95% of the beta emissions given off by 32p. The glass has a low alkalai content and a low coefficient of expansion. Bottles, caps and seals are resistant to all common hybridization reagents, including peg.

 

Barnstead Hybridization Bottles 35 mm ID x 150 mm Long Pack of 2

Barnstead Hybridization Bottles, 35 mm ID x 150 mm Long (Pack of 2)

Barnstead Hybridization Bottles, 35 mm ID x 150 mm Long (Pack of 2) - Additional accessories include drip trays, under cabinet mounting bracket, a rocker assembly, 10 x 15 or 23 x 25 cm packs of nylon mesh and a stacking plate to stack medium units.

 

Boekel 502-0150 Glass Hybridization Bottle with Blue Cap 35mm Diameter x 150mm Height Pack of 2

Boekel 502-0150 Glass Hybridization Bottle with Blue Cap, 35mm Diameter x 150mm Height (Pack of 2)

Boekel 502-0150 Glass Hybridization Bottle with Blue Cap, 35mm Diameter x 150mm Height (Pack of 2) - The company, founded in 1868 and headquartered in feasterville, pa, meets international organization for standardization (iso) standards 90012008 and 134852003. Boekel scientific manufactures laboratory equipment such as incubators, shakers, rotators, and water baths.

 

Chemglass CG-1140-17 Series CG-1140 Series GL-45 Hybridization Bottle 35 mm Diameter 300 mm Height Blue Cap Dual Chamber

Chemglass CG-1140-17 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 300 mm Height, Blue Cap, Dual Chamber

Chemglass CG-1140-17 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 300 mm Height, Blue Cap, Dual Chamber - Heavy wall bottle used in hybridization incubators or ovens with rotators. The red plastic cap has a ptfe faced liner and a working temperature of 180°c. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions. Dual chamber bottle has a capped opening at each end with a solid glass wall in the center to divide the bottle into two equal compartments. The blue cap has a silicone sealing ring and a working temperature of 140°c. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie.

 

Boekel 505-0001 Blue Caps with Silicone O Rings for Glass Hybridization Bottle Pack of 2

Boekel 505-0001 Blue Caps with Silicone “O” Rings for Glass Hybridization Bottle (Pack of 2)

Boekel 505-0001 Blue Caps with Silicone “O” Rings for Glass Hybridization Bottle (Pack of 2) - Boekel scientific manufactures laboratory equipment such as incubators, shakers, rotators, and water baths. The company, founded in 1868 and headquartered in feasterville, pa, meets international organization for standardization (iso) standards 90012008 and 134852003.

 

Thermo Scientific ELED 222053 Large Oven Mesh Sheet for Hybridization Bottle 23cm Length x 23cm Width

Thermo Scientific ELED 222053 Large Oven Mesh Sheet for Hybridization Bottle, 23cm Length x 23cm Width

Thermo Scientific ELED 222053 Large Oven Mesh Sheet for Hybridization Bottle, 23cm Length x 23cm Width - Type large. Mesh improves the flow of probe solution around and through membranes for optimal results. This thermo scientific eled large hybridization oven mesh sheet is 23 x 23cm. Using mesh also eases handling of membranes and improves hybridization results. Thermo scientific eled, “every lab, every day”. Dimensions 23 x 23cm. Thermo scientific eled # 222053.

 

Thermo Scientific ELED 110094 Borosilicate Glass Extra-Large Hybridization Bottle

Thermo Scientific ELED 110094 Borosilicate Glass Extra-Large Hybridization Bottle

Thermo Scientific ELED 110094 Borosilicate Glass Extra-Large Hybridization Bottle - Additional grippers can be purchased separately. Thermo scientific eled, “every lab, every day”. Material borosilicate glass. Thermo scientific eled # 110094. This thermo scientific eled hybridization extra-large bottle, 300 x 70mm, is manufactured using thick walled borosilicate glass to ensure safe and easy handling. Type extra large. Includes a bottle gripper for safe and easy handling of bottles. Dimensions 300 x 70mm.

 

Thermo Scientific ELED 110103 Six-Place Hybridization Bottle Rack for Thermo Scientific 110113 110115 and 110116

Thermo Scientific ELED 110103 Six-Place Hybridization Bottle Rack for Thermo Scientific 110113, 110115 and 110116

Thermo Scientific ELED 110103 Six-Place Hybridization Bottle Rack for Thermo Scientific 110113, 110115 and 110116 - Thermo scientific eled, “every lab, every day”. Thermo scientific eled # 110103. This thermo scientific eled bottle rack holds up to six 35mm bottles.

 

Bel-Art F16964-0006 Poxygrid Hybridization Bottle Rack for 40mm Diameter Bottles 6 Places 5⅜ x 7¹³⁄₁₆ x 5⅛ in

Bel-Art F16964-0006 Poxygrid Hybridization Bottle Rack for 40mm Diameter Bottles; 6 Places, 5⅜ x 7¹³⁄₁₆ x 5⅛ in.

Bel-Art F16964-0006 Poxygrid Hybridization Bottle Rack for 40mm Diameter Bottles; 6 Places, 5⅜ x 7¹³⁄₁₆ x 5⅛ in. - Holds 40mm diameter bottles with lengths of 150mm or 300mm. Rack is 127 x 200 x 137mm (h x w x d) with 42mm square openings. Made of heavy-duty wire that is epoxy-coated for chemical and corrosion resistance. Six-cell rack for holding hybridization bottles with ample spacing for screw caps. Steam autoclavable at 121 degrees c (250 degrees f).

 

Hybridization Bottle Safety Coated Glass Bottles with Cap and PTFE Liner 35 x 150mm

Hybridization Bottle, Safety Coated Glass Bottles with Cap and PTFE Liner, 35 x 150mm

Hybridization Bottle, Safety Coated Glass Bottles with Cap and PTFE Liner, 35 x 150mm - Heavy wall borosilicate glass bottles designed for use in standard hybridization ovens. Bottles are also available with a slip resistant plastic coating. Bottles feature a leakproof polypropylene closure with a ptfe/silicone liner. Fit all rotisseries that accommodate 35mm diameter bottles.

 

Chemglass CG-1140-02 Series CG-1140 Series GL-45 Hybridization Bottle 35 mm Diameter 100 mm Height Red Cap

Chemglass CG-1140-02 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 100 mm Height, Red Cap

Chemglass CG-1140-02 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 100 mm Height, Red Cap - The blue cap has a silicone sealing ring and a working temperature of 140°c. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. The red plastic cap has a ptfe faced liner and a working temperature of 180°c. Dual chamber bottle has a capped opening at each end with a solid glass wall in the center to divide the bottle into two equal compartments. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. Heavy wall bottle used in hybridization incubators or ovens with rotators.

 

Hybridization Bottle with Red Cap and PTFE Liner Borosilicate Glass Bottles 35 x 75mm

Hybridization Bottle with Red Cap and PTFE Liner, Borosilicate Glass Bottles, 35 x 75mm

Hybridization Bottle with Red Cap and PTFE Liner, Borosilicate Glass Bottles, 35 x 75mm - Heavy wall borosilicate glass bottles designed for use in standard hybridization ovens. Fit all rotisseries that accommodate 35mm diameter bottles. Bottles feature a leakproof polypropylene closure with a ptfe/silicone liner.

 

Thermo Scientific ELED 222033 Stainless Steel 4-Place Rotisserie with 70mm Attachment Clips for Extra-Large Hybridization Bottles

Thermo Scientific ELED 222033 Stainless Steel 4-Place Rotisserie with 70mm Attachment Clips for Extra-Large Hybridization Bottles

Thermo Scientific ELED 222033 Stainless Steel 4-Place Rotisserie with 70mm Attachment Clips for Extra-Large Hybridization Bottles - Thermo scientific eled, “every lab, every day”. Thermo scientific eled # 222033. This thermo scientific eled stainless steel 4 bottle rotisserie is for use with shake ‘n’ stack hybridization ovens and increases the versatility of the incubator. Material stainless steel.

 

Wheaton 805011 Borosilicate Glass Hybridization Bottle with PTFESilicone Lined 70mm Polypropylene Screw Cap 70 x 300mm

Wheaton 805011 Borosilicate Glass Hybridization Bottle, with PTFE/Silicone Lined 70mm Polypropylene Screw Cap, 70 x 300mm

Wheaton 805011 Borosilicate Glass Hybridization Bottle, with PTFE/Silicone Lined 70mm Polypropylene Screw Cap, 70 x 300mm - Bottles eliminate the need for messy bags and allow hybridization and wash solutions to be quickly poured in and out. Acrylic storage rack (805015) available separately safely holds and stores bottles. Manufactured from borosilicate glass that conforms to usp type i requirements and feature heavy 32mm sidewalls for added safety. Five bottle sizes accommodate a variety of membrane sizes. Bottles fit most standard hybridization ovens.

 

UVP Hybridizer 07-0194-02 Large Glass Borosilicate Hybridization Bottle with Cap for Hybridization Oven 35mm Diameter x 300mm Length

UVP Hybridizer 07-0194-02 Large Glass Borosilicate Hybridization Bottle with Cap for Hybridization Oven, 35mm Diameter x 300mm Length

UVP Hybridizer 07-0194-02 Large Glass Borosilicate Hybridization Bottle with Cap for Hybridization Oven, 35mm Diameter x 300mm Length - Bottle for hb-1000 hybridizer hybridization oven have a excellent long-term reliability, lead-free. 35mm x 300mm size large borosilicate glass polypropylene cap polytetrafluoroethylene seal.

 

Chemglass CG-1140-16 Series CG-1140 Series GL-45 Hybridization Bottle 35 mm Diameter 150 mm Height Blue Cap Dual Chamber

Chemglass CG-1140-16 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 150 mm Height, Blue Cap, Dual Chamber

Chemglass CG-1140-16 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 150 mm Height, Blue Cap, Dual Chamber - The red plastic cap has a ptfe faced liner and a working temperature of 180°c. Dual chamber bottle has a capped opening at each end with a solid glass wall in the center to divide the bottle into two equal compartments. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions. Heavy wall bottle used in hybridization incubators or ovens with rotators. The blue cap has a silicone sealing ring and a working temperature of 140°c.

 

Thermo Scientific M90615Q Labquake Rotisserie Hybridization Rotator 8rpm Fixed Speed 120V For 4 38 x 150mm Small Hybridization Bottles or 4 50mL Conical or Centrifuge Tubes

Thermo Scientific M90615Q Labquake Rotisserie Hybridization Rotator, 8rpm Fixed Speed, 120V, For (4) 38 x 150mm Small Hybridization Bottles or (4) 50mL Conical or Centrifuge Tubes

Thermo Scientific M90615Q Labquake Rotisserie Hybridization Rotator, 8rpm Fixed Speed, 120V, For (4) 38 x 150mm Small Hybridization Bottles or (4) 50mL Conical or Centrifuge Tubes - Holds four 38 x 150mm small hybridization bottles, four standard 25 x 150mm tubes, or four 50ml conical or centrifuge tubes. Tri-directional rotation assures optimal distribution of a minimal amount of probe solution. Aluminum shaft with polypropylene holder has both small and large slots for easy bottle and tube placement and removal. Benchtop analog rotisserie uses 120v to rotate conical tubes or hybridization bottles at a constant speed of 8rpm for thorough mixing. Bottles and tubes can be loaded or removed without shutting down motor.

 

Chemglass CG-1140-10 Series CG-1140 Series GL-45 Hybridization Bottle 35 mm Diameter 75 mm Height Blue Cap

Chemglass CG-1140-10 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 75 mm Height, Blue Cap

Chemglass CG-1140-10 Series CG-1140 Series GL-45 Hybridization Bottle, 35 mm Diameter, 75 mm Height, Blue Cap - The blue cap has a silicone sealing ring and a working temperature of 140°c. Dual chamber bottle has a capped opening at each end with a solid glass wall in the center to divide the bottle into two equal compartments. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. Heavy wall bottle used in hybridization incubators or ovens with rotators. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. The red plastic cap has a ptfe faced liner and a working temperature of 180°c.