21 Best Biosafety Cabinets in 2020

 

Labconco 304480100 Purifier 4 Axiom Class II Type C1 Biosafety Cabinet with 8 Sash Bs 115V

Labconco 304480100 Purifier 4′ Axiom Class II Type C1 Biosafety Cabinet with 8″ Sash, Bs 115V

Labconco 304480100 Purifier 4′ Axiom Class II Type C1 Biosafety Cabinet with 8″ Sash, Bs 115V - The purifier axiom class ii, type c1 is the first biological safety cabinet that can be used in a recirculating type a-mode for standard microbiological work, or can be connected to an exhaust system to function in type-b mode for handling hazardous chemical vapors or radionuclides. Because of the efficient, well-defined airflow pattern over its work surface, the axiom is safer and easier to operate than traditional biosafety cabinets.

 

Labconco 304411000 Purifier 4 Axiom Class II Type C1 Biosafety Cabinet with 10 Sash Ops 115V

Labconco 304411000 Purifier 4′ Axiom Class II Type C1 Biosafety Cabinet with 10″ Sash, Ops 115V

Labconco 304411000 Purifier 4′ Axiom Class II Type C1 Biosafety Cabinet with 10″ Sash, Ops 115V - The purifier axiom class ii, type c1 is the first biological safety cabinet that can be used in a recirculating type a-mode for standard microbiological work, or can be connected to an exhaust system to function in type-b mode for handling hazardous chemical vapors or radionuclides. Because of the efficient, well-defined airflow pattern over its work surface, the axiom is safer and easier to operate than traditional biosafety cabinets.

 

labtechsales Nuaire NU-602-600 Class II Type AB3 6 Ft Animal Handling Biosafety Cabinet

labtechsales Nuaire NU-602-600 Class II Type A/B3 6 Ft Animal Handling Biosafety Cabinet

labtechsales Nuaire NU-602-600 Class II Type A/B3 6 Ft Animal Handling Biosafety Cabinet - The cabinet is designed for maximum control over product quality and to offer protection to people working in the lab. The nu-602 was also created with ergonomics and ease-of-use in mind, so it is easy and convenient for lab technicians to use. The labgard es (energy saver) nu-602 class ii, type a2 animal handling biosafety cabinet is intended to be used for safe animal and cage handling in the laboratory. For additional information please visit manufacturer site belowhttps//www. Com/labgard-nu-602-class-ii-type-a2-animal-handling-biosafety-cabinetexported by exportyourstore. Nuaire.

 

Labconco 3780202 Manual Hydraulic Lift Base Stand for Purifier Logic Biosafety Cabinets 6 with Fixed Feet

Labconco 3780202 Manual Hydraulic Lift Base Stand for Purifier Logic Biosafety Cabinets, 6′ with Fixed Feet

Labconco 3780202 Manual Hydraulic Lift Base Stand for Purifier Logic Biosafety Cabinets, 6′ with Fixed Feet - Caster kits are available for added mobility. They provide support for a variety of labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate persons of different heights and wheelchair-bound users, to transport equipment through doorways, and easier service access. Manual hydraulic lift base stands are equipped with a built-in hydraulic lift with hand crank so that height may be adjusted at any time.

 

Labconco 304681110 Purifier 6 Axiom Class II Type C1 BioSafety Cabinet with 8 Sash Ops and BS 230V-NA 327 Length 917 Height 782 Wide

Labconco 304681110 Purifier 6′ Axiom Class II Type C1 BioSafety Cabinet with 8″ Sash, Ops and BS 230V-NA, 32.7″ Length, 91.7″ Height, 78.2″ Wide

Labconco 304681110 Purifier 6′ Axiom Class II Type C1 BioSafety Cabinet with 8″ Sash, Ops and BS 230V-NA, 32.7″ Length, 91.7″ Height, 78.2″ Wide - Because of the efficient, well-defined airflow pattern over its work surface, the axiom is safer and easier to operate than traditional biosafety cabinets. The purifier axiom class ii, type c1 is the first biological safety cabinet that can be used in a recirculating type a-mode for standard microbiological work, or can be connected to an exhaust system to function in type-b mode for handling hazardous chemical vapors or radionuclides.

 

302619000 - REDISHIP Purifier Logic Class II A2 Biosafety Cabinets Labconco - 6 REDISHIP Purifier Logic A2 Biosafety Cabinet Without Base Stand - Each

302619000 – REDISHIP Purifier Logic+ Class II A2 Biosafety Cabinets, Labconco – 6′ REDISHIP Purifier Logic+ A2 Biosafety Cabinet (Without Base Stand) – Each

302619000 – REDISHIP Purifier Logic+ Class II A2 Biosafety Cabinets, Labconco – 6′ REDISHIP Purifier Logic+ A2 Biosafety Cabinet (Without Base Stand) – Each - In other models, the stand is sold separately. Logic+ biosafety cabinets excel in user comfort and functionality. Ordering information all models are 115v and include uv light, service fixture, pass through, and sealed duplex receptacle (115v). Choose from an 8″ or a 10″ sash height. In addition, the cabinet will continuously display the hepa filter life remaining and cabinet status. Mylogic provides intuitive programming, color coded menus, status messages and alarms with diagnostic troubleshootingn/aall using full sentences. These features combine to provide unparalleled safety. Please refer to product specifications for all details. Base stand requires assembly. The cabinet provides personnel, product and environmental protection and is suitable for work in biosafety levels 1, 2 and 3. These biohazard cabinets are designed to discharge hepa-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional canopy connection. Decades of industry leading advances in ergonomic design have shaped the inclination technology suite that includes the following 10° angled sash, patented curved air grille with built in armrest, fully accessible controls and eye-level mounted color display with mylogic operating system. Some models include a telescoping base stand (shown in image). 80 the new rediship purifier logic+ class ii a2 biosafety cabinets ship within 48 hours using the same ecm blower technology as the purifier logic, the logic+ uses the constant airflow profile (cap) to maintain a precise volume of air as the filters load.

 

Labconco 4028100 Stand-Still Isolation Platform for Cell Logic Class II Biosafety Cabinets XL 140 W x 2275 L

Labconco 4028100 Stand-Still Isolation Platform for Cell Logic Class II Biosafety Cabinets, XL, 14.0″ W x 22.75″ L

Labconco 4028100 Stand-Still Isolation Platform for Cell Logic Class II Biosafety Cabinets, XL, 14.0″ W x 22.75″ L - For supporting microscopes on cell logic biosafety cabinets with scopeready package. Designed to promote proper airflow through the cabinet. 1. Reduces vertical and horizontal vibrations up to 300%. 5″ high (0. Constructed of seamless, non-porous, autoclavable type 304 stainless steel base with isolation pads. 4 cm). Stand-still platform 4028200 is included with the scope-ready package.

 

Labconco 304411100 Purifier 4 Axiom Class II Type C1 Biosafety Cabinet with 10 Sash Ops and BS 115V 917 Height 542 Wide 327 Length

Labconco 304411100 Purifier 4′ Axiom Class II Type C1 Biosafety Cabinet with 10″ Sash, Ops and BS 115V, 91.7″ Height, 54.2″ Wide, 32.7″ Length

Labconco 304411100 Purifier 4′ Axiom Class II Type C1 Biosafety Cabinet with 10″ Sash, Ops and BS 115V, 91.7″ Height, 54.2″ Wide, 32.7″ Length - Because of the efficient, well-defined airflow pattern over its work surface, the axiom is safer and easier to operate than traditional biosafety cabinets. The purifier axiom class ii, type c1 is the first biological safety cabinet that can be used in a recirculating type a-mode for standard microbiological work, or can be connected to an exhaust system to function in type-b mode for handling hazardous chemical vapors or radionuclides.

 

Labconco 304610100 Purifier 6 Axiom Class II Type C1 Biosafety Cabinet with 10 Sash BS 115V 917 Height 782 Wide 327 Length

Labconco 304610100 Purifier 6′ Axiom Class II Type C1 Biosafety Cabinet with 10″ Sash, BS 115V, 91.7″ Height, 78.2″ Wide, 32.7″ Length

Labconco 304610100 Purifier 6′ Axiom Class II Type C1 Biosafety Cabinet with 10″ Sash, BS 115V, 91.7″ Height, 78.2″ Wide, 32.7″ Length - The purifier axiom class ii, type c1 is the first biological safety cabinet that can be used in a recirculating type a-mode for standard microbiological work, or can be connected to an exhaust system to function in type-b mode for handling hazardous chemical vapors or radionuclides. Because of the efficient, well-defined airflow pattern over its work surface, the axiom is safer and easier to operate than traditional biosafety cabinets.

 

Labconco 304480000 Purifier 4 Axiom Class II Type C1 BioSafety Cabinet with 8 Sash No Ops 115V 327 Length 542 Width 642 Height

Labconco 304480000 Purifier 4′ Axiom Class II Type C1 BioSafety Cabinet with 8″ Sash, No Ops 115V, 32.7″ Length, 54.2″ Width, 64.2″ Height

Labconco 304480000 Purifier 4′ Axiom Class II Type C1 BioSafety Cabinet with 8″ Sash, No Ops 115V, 32.7″ Length, 54.2″ Width, 64.2″ Height - Made in united states. Dual electronically commutated motors (ecm). Unit count type is cabinet. Two operation modes type a mode for standard microbiological use and type b mode for connection to exhaust system when handling hazardous chemical vapors or radionuclides. Low static pressure and volumetric rate exhaust requirements when in type b mode, no dedicated exhaust system per bsc required as compared to contemporary class ii, type b biosafety cabinets.

 

302611130 - Each - 6 Purifier Logic Class II A2 Biosafety Cabinets International Electrical Configurations Labconco - 6 Purifier Logic A2 Biosafety Cabinet with Telescoping Base Stand UV Light

302611130 – Each – 6′ Purifier Logic+ Class II A2 Biosafety Cabinets, International Electrical Configurations, Labconco – 6′ Purifier Logic+ A2 Biosafety Cabinet with Telescoping Base Stand, UV Light,

302611130 – Each – 6′ Purifier Logic+ Class II A2 Biosafety Cabinets, International Electrical Configurations, Labconco – 6′ Purifier Logic+ A2 Biosafety Cabinet with Telescoping Base Stand, UV Light, - The cabinet provides personnel, product and environmental protection and is suitable for work in biosafety levels , 2 and 3. These features combine to provide unparalleled safety. Intuitive programming color-coded menus status messages and alarms diagnostic troubleshooting provides personnel, product and environmental protection suitable for work in biosafety levels , 2 and 3decades of industry leading advances in ergonomic design have shaped the inclination technology suite that includes the following ° angled sash, patented curved air grille with built in armrest, fully accessible controls and eye-level mounted color display with mylogic operating system using the same ecm blower technology as the purifier logic, the logic+ uses the constant airflow profile (cap) to maintain a precise volume of air as the filters load. In addition, the cabinet will continuously display the hepa filter life remaining and cabinet status. In addition, some models have base stands, uv lights, service fixtures, pass throughs and/or a combination of those features included. Please refer to sash opening, electrical configuration and product specifications for details. These biohazard cabinets are designed to discharge hepa-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional canopy connection. 5 8 3 3 8 87 7 5 4 3 673the new purifier logic+ class ii a2 biosafety cabinet excels in user comfort and functionality. Mylogic provides intuitive programming, color coded menus, status messages and alarms with diagnostic troubleshootingn/aall using full sentences.

 

302681170 - Each - 6 Purifier Logic Class II A2 Biosafety Cabinets International Electrical Configurations Labconco - 6 Purifier Logic A2 Biosafety Cabinet with Telescoping Base Stand UV Light

302681170 – Each – 6′ Purifier Logic+ Class II A2 Biosafety Cabinets, International Electrical Configurations, Labconco – 6′ Purifier Logic+ A2 Biosafety Cabinet with Telescoping Base Stand, UV Light,

302681170 – Each – 6′ Purifier Logic+ Class II A2 Biosafety Cabinets, International Electrical Configurations, Labconco – 6′ Purifier Logic+ A2 Biosafety Cabinet with Telescoping Base Stand, UV Light, - Please refer to sash opening, electrical configuration and product specifications for details. The cabinet provides personnel, product and environmental protection and is suitable for work in biosafety levels , 2 and 3. Mylogic provides intuitive programming, color coded menus, status messages and alarms with diagnostic troubleshootingn/aall using full sentences. These features combine to provide unparalleled safety. Intuitive programming color-coded menus status messages and alarms diagnostic troubleshooting provides personnel, product and environmental protection suitable for work in biosafety levels , 2 and 3decades of industry leading advances in ergonomic design have shaped the inclination technology suite that includes the following ° angled sash, patented curved air grille with built in armrest, fully accessible controls and eye-level mounted color display with mylogic operating system using the same ecm blower technology as the purifier logic, the logic+ uses the constant airflow profile (cap) to maintain a precise volume of air as the filters load. In addition, the cabinet will continuously display the hepa filter life remaining and cabinet status. In addition, some models have base stands, uv lights, service fixtures, pass throughs and/or a combination of those features included. 5 8 3 3 8 87 7 5 4 3 673the new purifier logic+ class ii a2 biosafety cabinet excels in user comfort and functionality. These biohazard cabinets are designed to discharge hepa-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional canopy connection.

 

Labconco 304681100 Purifier 6 Axiom Class II Type C1 Biosafety Cabinet with 8 Sash Ops and BS 115V 917 Height 782 Wide 327 Length

Labconco 304681100 Purifier 6′ Axiom Class II Type C1 Biosafety Cabinet with 8″ Sash, Ops and BS 115V, 91.7″ Height, 78.2″ Wide, 32.7″ Length

Labconco 304681100 Purifier 6′ Axiom Class II Type C1 Biosafety Cabinet with 8″ Sash, Ops and BS 115V, 91.7″ Height, 78.2″ Wide, 32.7″ Length - Because of the efficient, well-defined airflow pattern over its work surface, the axiom is safer and easier to operate than traditional biosafety cabinets. The purifier axiom class ii, type c1 is the first biological safety cabinet that can be used in a recirculating type a-mode for standard microbiological work, or can be connected to an exhaust system to function in type-b mode for handling hazardous chemical vapors or radionuclides.

 

Labconco 3858500 Ultraviolet Lamp Kit for Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations 115V

Labconco 3858500 Ultraviolet Lamp Kit for Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations, 115V

Labconco 3858500 Ultraviolet Lamp Kit for Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations, 115V - Interior dimensions n/a. Rediship no. Shipping weight 2 kg (5 lbs). For use with n/a. Description uv lamp kit, 115v.

 

302511130 - Each - 5 Purifier Logic Class II A2 Biosafety Cabinets International Electrical Configurations Labconco - 5 Purifier Logic A2 Biosafety Cabinet with Telescoping Base Stand UV Light

302511130 – Each – 5′ Purifier Logic+ Class II A2 Biosafety Cabinets, International Electrical Configurations, Labconco – 5′ Purifier Logic+ A2 Biosafety Cabinet with Telescoping Base Stand, UV Light,

302511130 – Each – 5′ Purifier Logic+ Class II A2 Biosafety Cabinets, International Electrical Configurations, Labconco – 5′ Purifier Logic+ A2 Biosafety Cabinet with Telescoping Base Stand, UV Light, - 99% efficient (with particles. 3 the new purifier logic+ class ii a2 biosafety cabinet excels in user comfort and functionality. These biohazard cabinets are designed to discharge hepa-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional canopy connection. The cabinet provides personnel, product and environmental protection and is suitable for work in biosafety levels 1, 2 and 3. These features combine to provide unparalleled safety. 3 micron) and have aluminum frames with either aluminum separators or separatorless pleats. In addition, the cabinet will continuously display the hepa filter life remaining and cabinet status. In addition, some models have base stands, uv lights, service fixtures, pass throughs and/or a combination of those features included. Intuitive programming color-coded menus status messaging and alarms diagnostic troubleshooting provides personnel, product and environmental protection suitable for work in biosafety levels 1, 2 and 3decades of industry leading advances in ergonomic design have shaped the inclination technology suite that includes the following 1° angled sash, patented curved air grille with built in armrest, fully accessible controls and eye-level mounted color display with mylogic operating system using the same ecm blower technology as the purifier logic, the logic+ uses the constant airflow profile (cap) to maintain a precise volume of air as the filters load. Accessories information replacement supply hepa filter for purifier logic biosafety cabinets and purifier cell logic biosafety cabinets. Please refer to sash opening, electrical configuration and product specifications for details mylogic provides intuitive programming, color coded menus, status messages and alarms with diagnostic troubleshootingn/aall using full sentences. Hepa filters are 99.

 

Labconco 3858501 Ultraviolet Lamp Kit for Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations 100V

Labconco 3858501 Ultraviolet Lamp Kit for Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations, 100V

Labconco 3858501 Ultraviolet Lamp Kit for Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations, 100V - Interior dimensions n/a. Shipping weight 2 kg (5 lbs). Description uv lamp kit, 100v. For use with n/a. Rediship no.

 

Labconco 304680100 Purifier 6 Axiom Class II Type C1 BioSafety Cabinet with 8 Sash BS 115V 327 Length 782 Width 917 Height

Labconco 304680100 Purifier 6′ Axiom Class II Type C1 BioSafety Cabinet with 8″ Sash, BS 115V, 32.7″ Length, 78.2″ Width, 91.7″ Height

Labconco 304680100 Purifier 6′ Axiom Class II Type C1 BioSafety Cabinet with 8″ Sash, BS 115V, 32.7″ Length, 78.2″ Width, 91.7″ Height - Dual electronically commutated motors (ecm). Two operation modes type a mode for standard microbiological use and type b mode for connection to exhaust system when handling hazardous chemical vapors or radionuclides. Unit count type is cabinet. Constant airflow profile (cap) technology airflow monitoring system that provides constant and precise volume of air as required and automatically adjusts as filter load without relying on airflow or pressure sensors. Made in united states.

 

302681150 - Each - 6 Purifier Logic Class II A2 Biosafety Cabinets International Electrical Configurations Labconco - 6 Purifier Logic A2 Biosafety Cabinet with Telescoping Base Stand UV Light

302681150 – Each – 6′ Purifier Logic+ Class II A2 Biosafety Cabinets, International Electrical Configurations, Labconco – 6′ Purifier Logic+ A2 Biosafety Cabinet with Telescoping Base Stand, UV Light,

302681150 – Each – 6′ Purifier Logic+ Class II A2 Biosafety Cabinets, International Electrical Configurations, Labconco – 6′ Purifier Logic+ A2 Biosafety Cabinet with Telescoping Base Stand, UV Light, - In addition, some models have base stands, uv lights, service fixtures, pass throughs and/or a combination of those features included. In addition, the cabinet will continuously display the hepa filter life remaining and cabinet status. These biohazard cabinets are designed to discharge hepa-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional canopy connection. Please refer to sash opening, electrical configuration and product specifications for details. Intuitive programming color-coded menus status messages and alarms diagnostic troubleshooting provides personnel, product and environmental protection suitable for work in biosafety levels , 2 and 3decades of industry leading advances in ergonomic design have shaped the inclination technology suite that includes the following ° angled sash, patented curved air grille with built in armrest, fully accessible controls and eye-level mounted color display with mylogic operating system using the same ecm blower technology as the purifier logic, the logic+ uses the constant airflow profile (cap) to maintain a precise volume of air as the filters load. These features combine to provide unparalleled safety. The cabinet provides personnel, product and environmental protection and is suitable for work in biosafety levels , 2 and 3. 5 8 3 3 8 7 7 5 4 3 673the new purifier logic+ class ii a2 biosafety cabinet excels in user comfort and functionality. Mylogic provides intuitive programming, color coded menus, status messages and alarms with diagnostic troubleshootingn/aall using full sentences.

 

Labconco 304481100 Purifier 4 Axiom Class II Type C1 BioSafety Cabinet with 8 Sash Ops BS 115V 327 Length 542 Width 917 Height

Labconco 304481100 Purifier 4′ Axiom Class II Type C1 BioSafety Cabinet with 8″ Sash, Ops & BS 115V, 32.7″ Length, 54.2″ Width, 91.7″ Height

Labconco 304481100 Purifier 4′ Axiom Class II Type C1 BioSafety Cabinet with 8″ Sash, Ops & BS 115V, 32.7″ Length, 54.2″ Width, 91.7″ Height - Dual electronically commutated motors (ecm). Low static pressure and volumetric rate exhaust requirements when in type b mode, no dedicated exhaust system per bsc required as compared to contemporary class ii, type b biosafety cabinets. Made in united states. Two operation modes type a mode for standard microbiological use and type b mode for connection to exhaust system when handling hazardous chemical vapors or radionuclides. Unit count type is cabinet.

 

Labconco 3858502 Ultraviolet Lamp Kit for Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations 230V

Labconco 3858502 Ultraviolet Lamp Kit for Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations, 230V

Labconco 3858502 Ultraviolet Lamp Kit for Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations, 230V - Description uv lamp kit, 230v. For use with n/a. Rediship no. Interior dimensions n/a. Shipping weight 2 kg (5 lbs).

 

Labconco 304611100 Purifier 6 Axiom Class II Type C1 Biosafety Cabinet with 10 Sash Ops and Bs 115V

Labconco 304611100 Purifier 6′ Axiom Class II Type C1 Biosafety Cabinet with 10″ Sash, Ops and Bs 115V

Labconco 304611100 Purifier 6′ Axiom Class II Type C1 Biosafety Cabinet with 10″ Sash, Ops and Bs 115V - Because of the efficient, well-defined airflow pattern over its work surface, the axiom is safer and easier to operate than traditional biosafety cabinets. The purifier axiom class ii, type c1 is the first biological safety cabinet that can be used in a recirculating type a-mode for standard microbiological work, or can be connected to an exhaust system to function in type-b mode for handling hazardous chemical vapors or radionuclides.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.