19 Best and Coolest Electrothermals

 

Electrothermal Electromantle Extraction Heater - 6 positions 1000 mL 115V #ad

Electrothermal Electromantle Extraction Heater – 6 positions, 1000 mL, 115V

Electrothermal Electromantle Extraction Heater – 6 positions, 1000 mL, 115V #ad - If applicable, the light also indicates power supplied to stirring function. Each mantle position has an independent heater, allowing liquids with different boiling points to be heated alongside each other, up to a maximum element temperature range of 450°c. The three-position models have one stir controller for all three mantles. Robust construction permits continuous operation of the mantles as required by routine extraction tests. Each independent heater has its own control dial, on/off switch, and indicator light. Units with stirring function allow you to stir from 50 to 1000 rpm while heating. Regulating the heat on these multiposition extraction mantles is simple using the built-in solid-state electronic controls, choose from units with heat only or heater/stirrer combination. Powder-coated aluminum surfaces and polypropylene top cover ensure good chemical resistance and easy cleanup. Accommodate flask capacities from 100 to 1000 ml. Exclusively designed to allow liquids with different boiling points to be heated and/or stirred next to each other unique vented airflow ensures the case remains “cool-to-the-touch”. A quartz heating element is housed in a thermally insulated cartridge for easy replacement, extending the life of the heater. The lower part of the unit containing the control equipment is safely separated from the upper heating elements by a well-ventilated air space. Stir or heat your solutions simultaneously in each position. Built for versatility, the units accept round-bottom flasks ranging from 100 to 1000 ml. The six-position models have two stir controllers one for each set of three mantles. Choice of three or six positions, with or without stirring function.

 

Electrothermal Stirring Heating Mantle 250 ml 150 Watts 115 V 5060 Hz #ad

Electrothermal Stirring Heating Mantle, 250 ml, 150 Watts, 115 V, 50/60 Hz

Electrothermal Stirring Heating Mantle, 250 ml, 150 Watts, 115 V, 50/60 Hz #ad - Two colored lights near the control dial indicate “power on” and “heat on. The stirring circuitry, built into the base of the mantle, provides bidirectional stirring speeds up to 520 rpm. An “auto-recapture” function reactivates stirring if it is interrupted or lost for any reason. ” Provides powerful stirring speeds up to 520 rpm flexible heating element ensures minimum risk of flask breakage. Grounded earth screen and double fuses provide addition safety. These grounded stirring/heating mantles share all the features of a standard heating mantle plus the added functionality of a magnetic stirrer for a wide range of applications. Chemical-resistant polypropylene design makes cleaning easy. Accepts round-bottom flasks from 50 to 2000 ml. Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support. Built-in power controller has dial markings from 1 to 10 for repeatability. Chemical-resistant polypropylene exterior remains cool to the touch even when the element temperatures reach 842°f (450°c).

 

Electrothermal ATS10112 Cooling Plug for 6 x 56 mm Dry Block #ad

Electrothermal ATS10112 Cooling Plug for 6 x 56 mm Dry Block

Electrothermal ATS10112 Cooling Plug for 6 x 56 mm Dry Block #ad - Description cooling plug for 6 x 56 mm dry block. Number of items 1. Use with electrothermal os6000 omni reaction stations.

 

Electrothermal CM1000C Heating Mantle 110120V 5060Hz 300W 450C Max #ad

Electrothermal CM1000C Heating Mantle 110/120V 50/60Hz, 300W, 450C Max

Electrothermal CM1000C Heating Mantle 110/120V 50/60Hz, 300W, 450C Max #ad - From our online store inventory, we are selling a electrothermal cm1000c heating mantle 110/120v 50/60hz, 300w, 450c max. Specifications model # electrothermal cm1000c heating mantle 110/120v 50/60hz, 300w, 450c max more information 110/120v 50/60hz 300w 450c max mantle dimensions 6″ round, 3″ deep overall size 10-1/2″ x 5-1/2″.

 

Electrothermal Stirring Heating Mantle 500 ml 200 Watts 230 V 5060 Hz #ad

Electrothermal Stirring Heating Mantle, 500 ml, 200 Watts, 230 V, 50/60 Hz

Electrothermal Stirring Heating Mantle, 500 ml, 200 Watts, 230 V, 50/60 Hz #ad - Two colored lights near the control dial indicate “power on” and “heat on. Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support. Built-in power controller has dial markings from 1 to 10 for repeatability. Chemical-resistant polypropylene design makes cleaning easy. These grounded stirring/heating mantles share all the features of a standard heating mantle plus the added functionality of a magnetic stirrer for a wide range of applications. Accepts round-bottom flasks from 50 to 2000 ml. Chemical-resistant polypropylene exterior remains cool to the touch even when the element temperatures reach 842°f (450°c). Grounded earth screen and double fuses provide addition safety. The stirring circuitry, built into the base of the mantle, provides bidirectional stirring speeds up to 520 rpm. An “auto-recapture” function reactivates stirring if it is interrupted or lost for any reason. ” Provides powerful stirring speeds up to 520 rpm flexible heating element ensures minimum risk of flask breakage.

 

Electrothermal Paraffin Wax Dispenser US plug 115 V #ad

Electrothermal Paraffin Wax Dispenser, US plug; 115 V

Electrothermal Paraffin Wax Dispenser, US plug; 115 V #ad - Tap is a non-drip swivel lever with a replaceable filter. Red neon light alerts you if an over-temperature condition occurs. Wax dispenser easily heats wax to a liquid state for immediate ‘wax on tap’ for histology and pathology laboratories. Built-in thermostat regulates the wax temperature from ambient to 167°f (75°c). Safety features include overtemperature cutout at 221°f (105°c) and nonresettable thermal fuse. Note the dispenser is intended for paraffin wax use only with a melting range from 113 to 149°f (45 to 65°c) inclusive. Aluminum interior and exterior make cleaning easy. Four neon lights indicate power on, wax bath heater on, tap heater on, and wax bath overtemperature warning. Eliminate wax solidifying at the tap one-gallon capacity ensures ample supply of wax is on hand. A special independent temperature control keeps dispenser tap heated to ensure wax always remains flowing when tap is open.

 

Electrothermal CMUA100CEX1 Stirring Heating Mantle 100 mL 115 V #ad

Electrothermal CMUA100/CEX1 Stirring Heating Mantle, 100 mL; 115 V

Electrothermal CMUA100/CEX1 Stirring Heating Mantle, 100 mL; 115 V #ad - Reach stirring speeds up to 2000 rpm. Magnetic stirrer and heating mantle in one convenient unit flexible coiled heating element wraps the heater around round-bottom flask to optimize heat transfer. Simply use the auto-recapture switch to reactivate stirring if stirring is interrupted and stirring motion is lost. ” Powder-coated aluminum housing makes it easy to clean. Two colored lights by each control dial indicate “power on” and “heat on. These stirring/heating mantles combine the functionality of a heating mantle with a magnetic stirrer providing even heating and mixing. For maximum safety, the flask does not come in direct contact with the heating element. Element temperatures can reach up to 825°f (450°c) yet the exterior remains cool to the touch. “Cool to the touch” exterior provides safe handling. Built-in energy regulator and safety earth (ground) screen offer added safety protection.

 

Electrothermal Electromantle Extraction Heater - 3 positions 500 mL 115V #ad

Electrothermal Electromantle Extraction Heater – 3 positions, 500 mL, 115V

Electrothermal Electromantle Extraction Heater – 3 positions, 500 mL, 115V #ad - Regulating the heat on these multiposition extraction mantles is simple using the built-in solid-state electronic controls, choose from units with heat only or heater/stirrer combination. Choice of three or six positions, with or without stirring function. If applicable, the light also indicates power supplied to stirring function. Each mantle position has an independent heater, allowing liquids with different boiling points to be heated alongside each other, up to a maximum element temperature range of 450°c. Built for versatility, the units accept round-bottom flasks ranging from 100 to 1000 ml. The six-position models have two stir controllers one for each set of three mantles. Units with stirring function allow you to stir from 50 to 1000 rpm while heating. Each independent heater has its own control dial, on/off switch, and indicator light. The three-position models have one stir controller for all three mantles. Robust construction permits continuous operation of the mantles as required by routine extraction tests. Stir or heat your solutions simultaneously in each position. Exclusively designed to allow liquids with different boiling points to be heated and/or stirred next to each other unique vented airflow ensures the case remains “cool-to-the-touch”. Powder-coated aluminum surfaces and polypropylene top cover ensure good chemical resistance and easy cleanup. Accommodate flask capacities from 100 to 1000 ml. The lower part of the unit containing the control equipment is safely separated from the upper heating elements by a well-ventilated air space. A quartz heating element is housed in a thermally insulated cartridge for easy replacement, extending the life of the heater.

 

Electrothermal Mel-Temp Melting Point Apparatus 100-240 VAC 50-60 Hz #ad

Electrothermal Mel-Temp Melting Point Apparatus; 100-240 VAC, 50-60 Hz

Electrothermal Mel-Temp Melting Point Apparatus; 100-240 VAC, 50-60 Hz #ad - Simply key in your set point temperature and once the oven temperature reaches the set temperature, audible beeps indicate oven temperature stability. The temperature slowly ramps up from the set point and the melt is observed through the 8x magnifying lens melt temperature is displayed on the lcd. Position the adjustable arm where you need it and rotate the viewing head to eliminate glare on the lens. Quickly and easily measure the melting point temperature of up to three samples using the mel-temp apparatus. Up to four melt temperatures can be stored in temporary memory. Integral light and 8x magnifying lens enhance sample observation. Adjustable extension arm ensures proper viewing height for each user view up to three samples simultaneously for greater efficiency.

 

Electrothermal EMEA Electromantle 6-Place Extraction HeaterStirrer 500 mL 115V US #ad

Electrothermal EMEA Electromantle 6-Place Extraction Heater/Stirrer, 500 mL, 115V US

Electrothermal EMEA Electromantle 6-Place Extraction Heater/Stirrer, 500 mL, 115V US #ad - Stir or heat your solutions simultaneously in each position. Units with stirring function allow you to stir from 50 to 1000 rpm while heating. Accommodate flask capacities from 100 to 1000 ml. Each mantle position has an independent heater, allowing liquids with different boiling points to be heated alongside each other, up to a maximum element temperature range of 450°c. The lower part of the unit containing the control equipment is safely separated from the upper heating elements by a well-ventilated air space. Powder-coated aluminum surfaces and polypropylene top cover ensure good chemical resistance and easy cleanup. The six-position models have two stir controllers one for each set of three mantles. Built for versatility, the units accept round-bottom flasks ranging from 100 to 1000 ml. If applicable, the light also indicates power supplied to stirring function. A quartz heating element is housed in a thermally insulated cartridge for easy replacement, extending the life of the heater. The three-position models have one stir controller for all three mantles. Choice of three or six positions, with or without stirring function. Regulating the heat on these multiposition extraction mantles is simple using the built-in solid-state electronic controls, choose from units with heat only or heater/stirrer combination. Exclusively designed to allow liquids with different boiling points to be heated and/or stirred next to each other unique vented airflow ensures the case remains “cool-to-the-touch”. Robust construction permits continuous operation of the mantles as required by routine extraction tests. Each independent heater has its own control dial, on/off switch, and indicator light.

 

Electrothermal EMEA3 0250CE EMEA Electromantle 3-Place Extraction HeaterStirrer 250 mL 230V UK #ad

Electrothermal EMEA3 0250/CE EMEA Electromantle 3-Place Extraction Heater/Stirrer, 250 mL, 230V UK

Electrothermal EMEA3 0250/CE EMEA Electromantle 3-Place Extraction Heater/Stirrer, 250 mL, 230V UK #ad - The lower part of the unit containing the control equipment is safely separated from the upper heating elements by a well-ventilated air space. Each independent heater has its own control dial, on/off switch, and indicator light. Regulating the heat on these multiposition extraction mantles is simple using the built-in solid-state electronic controls, choose from units with heat only or heater/stirrer combination. Built for versatility, the units accept round-bottom flasks ranging from 100 to 1000 ml. Exclusively designed to allow liquids with different boiling points to be heated and/or stirred next to each other unique vented airflow ensures the case remains “cool-to-the-touch”. A quartz heating element is housed in a thermally insulated cartridge for easy replacement, extending the life of the heater. The six-position models have two stir controllers one for each set of three mantles. Stir or heat your solutions simultaneously in each position. The three-position models have one stir controller for all three mantles. Accommodate flask capacities from 100 to 1000 ml. Units with stirring function allow you to stir from 50 to 1000 rpm while heating. Robust construction permits continuous operation of the mantles as required by routine extraction tests. Each mantle position has an independent heater, allowing liquids with different boiling points to be heated alongside each other, up to a maximum element temperature range of 450°c. Choice of three or six positions, with or without stirring function. If applicable, the light also indicates power supplied to stirring function. Powder-coated aluminum surfaces and polypropylene top cover ensure good chemical resistance and easy cleanup.

 

ELECTROTHERMAL 500-1000mL V-Shaped Heating Mantle Elecromantle MV EMV1000CE #ad

ELECTROTHERMAL 500-1000mL V-Shaped Heating Mantle Elecromantle MV EMV1000/CE

ELECTROTHERMAL 500-1000mL V-Shaped Heating Mantle Elecromantle MV EMV1000/CE #ad - 9. Power cord included. Biotech bargains california electrothermal 500-1000ml v-shaped heating mantle elecromantle mv emv1000/ce v-shaped to accommodate 100-200 mm diameter funnels. 7 (625)). This product can not be intended for use in either human or animal food manufacturing processes or related purposes.  _gsrx_vers_625 (gs 6. Tested and working.

 

Electrothermal Capillary tubes 20-mm 1000pack #ad

Electrothermal Capillary tubes; 2.0-mm; 1000/pack

Electrothermal Capillary tubes; 2.0-mm; 1000/pack #ad - Description capillary tubes 20-mm 1000/pack. Number of items 1000.

 

Electrothermal EMEA Electromantle 6-Place Extraction HeaterStirrer 1000 mL 115V US #ad

Electrothermal EMEA Electromantle 6-Place Extraction Heater/Stirrer, 1000 mL, 115V US

Electrothermal EMEA Electromantle 6-Place Extraction Heater/Stirrer, 1000 mL, 115V US #ad - The lower part of the unit containing the control equipment is safely separated from the upper heating elements by a well-ventilated air space. Robust construction permits continuous operation of the mantles as required by routine extraction tests. The three-position models have one stir controller for all three mantles. Each mantle position has an independent heater, allowing liquids with different boiling points to be heated alongside each other, up to a maximum element temperature range of 450°c. If applicable, the light also indicates power supplied to stirring function. Accommodate flask capacities from 100 to 1000 ml. The six-position models have two stir controllers one for each set of three mantles. Stir or heat your solutions simultaneously in each position. Exclusively designed to allow liquids with different boiling points to be heated and/or stirred next to each other unique vented airflow ensures the case remains “cool-to-the-touch”. Choice of three or six positions, with or without stirring function. Each independent heater has its own control dial, on/off switch, and indicator light. A quartz heating element is housed in a thermally insulated cartridge for easy replacement, extending the life of the heater. Built for versatility, the units accept round-bottom flasks ranging from 100 to 1000 ml. Powder-coated aluminum surfaces and polypropylene top cover ensure good chemical resistance and easy cleanup. Units with stirring function allow you to stir from 50 to 1000 rpm while heating. Regulating the heat on these multiposition extraction mantles is simple using the built-in solid-state electronic controls, choose from units with heat only or heater/stirrer combination.

 

Electrothermal Electromantle Extraction Heater - 3 positions 1000 mL 115V #ad

Electrothermal Electromantle Extraction Heater – 3 positions, 1000 mL, 115V

Electrothermal Electromantle Extraction Heater – 3 positions, 1000 mL, 115V #ad - Units with stirring function allow you to stir from 50 to 1000 rpm while heating. Powder-coated aluminum surfaces and polypropylene top cover ensure good chemical resistance and easy cleanup. If applicable, the light also indicates power supplied to stirring function. The lower part of the unit containing the control equipment is safely separated from the upper heating elements by a well-ventilated air space. Each independent heater has its own control dial, on/off switch, and indicator light. Robust construction permits continuous operation of the mantles as required by routine extraction tests. Exclusively designed to allow liquids with different boiling points to be heated and/or stirred next to each other unique vented airflow ensures the case remains “cool-to-the-touch”. Built for versatility, the units accept round-bottom flasks ranging from 100 to 1000 ml. Choice of three or six positions, with or without stirring function. Stir or heat your solutions simultaneously in each position. Each mantle position has an independent heater, allowing liquids with different boiling points to be heated alongside each other, up to a maximum element temperature range of 450°c. A quartz heating element is housed in a thermally insulated cartridge for easy replacement, extending the life of the heater. The six-position models have two stir controllers one for each set of three mantles. Accommodate flask capacities from 100 to 1000 ml. Regulating the heat on these multiposition extraction mantles is simple using the built-in solid-state electronic controls, choose from units with heat only or heater/stirrer combination. The three-position models have one stir controller for all three mantles.

 

Electrothermal Stirring heating mantle 1000 mL 300 W 230 V 5060 Hz #ad

Electrothermal Stirring heating mantle, 1000 mL, 300 W, 230 V, 50/60 Hz

Electrothermal Stirring heating mantle, 1000 mL, 300 W, 230 V, 50/60 Hz #ad - Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support. Built-in power controller has dial markings from 1 to 10 for repeatability. Accepts round-bottom flasks from 50 to 2000 ml. The stirring circuitry, built into the base of the mantle, provides bidirectional stirring speeds up to 520 rpm. Chemical-resistant polypropylene exterior remains cool to the touch even when the element temperatures reach 842°f (450°c). Grounded earth screen and double fuses provide addition safety. These grounded stirring/heating mantles share all the features of a standard heating mantle plus the added functionality of a magnetic stirrer for a wide range of applications. Two colored lights near the control dial indicate “power on” and “heat on. Chemical-resistant polypropylene design makes cleaning easy. ” Provides powerful stirring speeds up to 520 rpm flexible heating element ensures minimum risk of flask breakage. An “auto-recapture” function reactivates stirring if it is interrupted or lost for any reason.

 

Electrothermal MQ 6-Well Micro-Kjeldahl Extraction Heater 300 mL 115V US #ad

Electrothermal MQ 6-Well Micro-Kjeldahl Extraction Heater, 300 mL, 115V US

Electrothermal MQ 6-Well Micro-Kjeldahl Extraction Heater, 300 mL, 115V US #ad - Unit must be hard-wired. 7 mm) in diameter. Each mantle has an independent heater with control dial, on/off switch, and indicator light, and operates to a maximum element temperature of 800°c. The lower part of the unit containing the control equipment is safely separated from the upper heating elelments by a well-ventilated air space. Units are double fused on the supply line and neutral for extra safety. A quartz heating element is housed in a thermally insulated cartridge for easy replacement, extending the life of the heater. Power cord is not included. Stainless steel construction is rugged and easy-to-clean. Designed to determine the protein content of food on a macro scale, from 100 to 800 ml choose from 2- or 6-position heaters to accommodate a variety of flask sizes depending on your application. Set the same temperature for all six mantles or adjust the range of each mantle individually. Heaters are supplied with back-mounted brackets to hold support rods up to 1/2″ (12. These multiposition extraction heaters let you run several projects simultaneously by using either two or six individually controlled heating mantles.

 

Electrothermal Stirring Heating Mantle 500 ml 200 Watts 115 V 5060 Hz #ad

Electrothermal Stirring Heating Mantle, 500 ml, 200 Watts, 115 V, 50/60 Hz

Electrothermal Stirring Heating Mantle, 500 ml, 200 Watts, 115 V, 50/60 Hz #ad - Chemical-resistant polypropylene design makes cleaning easy. Accepts round-bottom flasks from 50 to 2000 ml. Chemical-resistant polypropylene exterior remains cool to the touch even when the element temperatures reach 842°f (450°c). Grounded earth screen and double fuses provide addition safety. ” Provides powerful stirring speeds up to 520 rpm flexible heating element ensures minimum risk of flask breakage. Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support. These grounded stirring/heating mantles share all the features of a standard heating mantle plus the added functionality of a magnetic stirrer for a wide range of applications. An “auto-recapture” function reactivates stirring if it is interrupted or lost for any reason. The stirring circuitry, built into the base of the mantle, provides bidirectional stirring speeds up to 520 rpm. Two colored lights near the control dial indicate “power on” and “heat on. Built-in power controller has dial markings from 1 to 10 for repeatability.

 

Electrothermal Electromantle Extraction Heater - 6 positions 250 mL 115V #ad

Electrothermal Electromantle Extraction Heater – 6 positions, 250 mL, 115V

Electrothermal Electromantle Extraction Heater – 6 positions, 250 mL, 115V #ad - Powder-coated aluminum surfaces and polypropylene top cover ensure good chemical resistance and easy cleanup. Built for versatility, the units accept round-bottom flasks ranging from 100 to 1000 ml. Each mantle position has an independent heater, allowing liquids with different boiling points to be heated alongside each other, up to a maximum element temperature range of 450°c. A quartz heating element is housed in a thermally insulated cartridge for easy replacement, extending the life of the heater. Accommodate flask capacities from 100 to 1000 ml. Choice of three or six positions, with or without stirring function. Each independent heater has its own control dial, on/off switch, and indicator light. Stir or heat your solutions simultaneously in each position. If applicable, the light also indicates power supplied to stirring function. The six-position models have two stir controllers one for each set of three mantles. Exclusively designed to allow liquids with different boiling points to be heated and/or stirred next to each other unique vented airflow ensures the case remains “cool-to-the-touch”. The lower part of the unit containing the control equipment is safely separated from the upper heating elements by a well-ventilated air space. Regulating the heat on these multiposition extraction mantles is simple using the built-in solid-state electronic controls, choose from units with heat only or heater/stirrer combination. Units with stirring function allow you to stir from 50 to 1000 rpm while heating. The three-position models have one stir controller for all three mantles. Robust construction permits continuous operation of the mantles as required by routine extraction tests.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.