18 Top Oakton Phs

 

Oakton pH Calibration Buffer 1001 10 L

Oakton pH Calibration Buffer, 10.01, 1.0 L

Oakton pH Calibration Buffer, 10.01, 1.0 L - Standardized against nist traceable materials. Oakton® buffers for meters with 0. Sold in individual bottles 500-ml bottles are also available in cases of 12, 4-l(1-gal) bottles in cases of four. Store buffers away from direct sunlight. 01 ph at 77°f (25°c). 01 resolution are standardized against nist-traceable ph references within 0.

 

Oakton pH Solution Pack pH 4017001000 StorageCleaning 500 mL each

Oakton pH Solution Pack; pH 4.01/7.00/10.00, Storage/Cleaning, 500 mL each

Oakton pH Solution Pack; pH 4.01/7.00/10.00, Storage/Cleaning, 500 mL each - Pack includes one 500-ml bottle each of ph 4. 01, 7. 00, and 10. Save over 25% compared to ordering separately. Economical and convenient way to order everything you need to calibrate, clean, and store your ph electrodes. 00 buffers one 500-ml bottle of cleaning solution for grease, oil, and protein removal and one 500-ml bottle of storage solution to properly store your electrode while not in use.

 

Oakton Replacement All-In-One pHTemperature Probe Single Junction and Epoxy Body

Oakton Replacement All-In-One pH/Temperature Probe, Single Junction and Epoxy Body

Oakton Replacement All-In-One pH/Temperature Probe, Single Junction and Epoxy Body - It is commonly used for testing clean water and general-purpose applications. This electrode is an all-in-one type with a built-in combination ph electrode/temperature sensor, waterproof-type (6-pin) connector, and 30-inch cable for ease of use. Oakton instruments manufactures an array of scientific instruments for research, industrial, and educational uses. The electrode, also known as a probe, measures the ph of a solution. It has a pin-type junction for low electrolyte flow and longer life, and has a bnc-connected combination reference and measuring cell, for ease of use and to provide tight coaxial cable connections. The oakton wd-35808-71 replacement probe is a single-junction, 12 mm, all-in-one, waterproof, ph/temperature electrode, with an epoxy body, and 0-12 ph range. Since 1991, oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. The 35808-71 electrode has a temperature range of 0 to 80 degrees c (32 to 176 degrees f). It houses a gel-filled electrolyte, inside of its reference chamber to enhance performance, and has a close-knit, ceramic junction to prevent back diffusion problems, and resist clogging. Ph electrodes measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists in hydroponics, aquaculture, agriculture, and wine-making. What’s in the box one electrode wd-35808-71 electrode storage container one 30-inch cable bnc connector. It features a single-junction electrode for general-purpose applications, and an epoxy body for impact resistance and durability. It comes with a protective electrode storage container to prevent damage. It is intended for use with oakton ph 300/310, ph/con 300, ph/con 510 meters (sold separately). Oakton is based in vernon hills, il, and has facilities in europe, asia, and china.

 

Oakton PH Probe Epoxy Body DJ Gel-Filled 12-mm OD 3-ft Cable BNC

Oakton PH Probe, Epoxy Body, DJ, Gel-Filled, 12-mm OD, 3-ft Cable, BNC

Oakton PH Probe, Epoxy Body, DJ, Gel-Filled, 12-mm OD, 3-ft Cable, BNC - Material epoxy. Use with any meter with bnc. Description ph probe, epoxy body, dj, gel-filled, 12-mm od, 3-ft cable, bnc. Number of items 1.

 

Oakton WD-00653-04 pHORP Electrode Storage Solution 1 Pint Bottle

Oakton WD-00653-04 pH/ORP Electrode Storage Solution, 1 Pint Bottle

Oakton WD-00653-04 pH/ORP Electrode Storage Solution, 1 Pint Bottle - Polyethylene terephthalate glycol (petg)-bottle packaging to improve shelf life. Manufactured according to the american public health association (apha) and american society for testing and materials (astm) formulation for more accurate readings. Ph/oxygen reduction potential (orp) storage solution for more accurate readings. Liquid solution to keep bulb moist for quicker readings. One-pint (550-ml) bottle for ease of use.

 

Oakton pH 150 Waterproof Portable Meter with SJ All-in-One Electrode

Oakton pH 150 Waterproof Portable Meter with SJ All-in-One Electrode

Oakton pH 150 Waterproof Portable Meter with SJ All-in-One Electrode - What’s included all-in-one single-junction ph/atc electrode 35808-71, grip-clip electrode holder, and two aa batteries. Rugged, accurate, reliable, best value for an ip67-rated waterproof meter intuitive, user-friendly icons-electrode status displays ph slope grip-cliptm holder quickly and easily secures the electrode to your beaker or container expanded data logging for up to 150 data sets mv offset for calibration of orp standards, zeroing mv value, and ph diagnostics 700 hours battery-life or optional universal power adapter built-in stand and wall mount option allow for easy bench top measurement or storage.

 

Oakton Instruments WD-35653-04 pH Calibration Solution Pouch Assorted Box of 20

Oakton Instruments WD-35653-04 pH Calibration Solution Pouch, Assorted (Box of 20)

Oakton Instruments WD-35653-04 pH Calibration Solution Pouch, Assorted (Box of 20) - All oakton ph buffer solutions are freshness dated, and standardized against nist-traceable references to ensure quality. Oakton pouches are convenient, air-tight pouches with high-precision calibration standards. 01 ph at 25°c. Each box contains twenty 20 ml pouches. ±0. Ideal for field use-take them to your test site for on-the-spot calibration.

 

Oakton pH 700 Benchtop Meter with All-in-One pH Electrode

Oakton pH 700 Benchtop Meter with “All-in-One” pH Electrode

Oakton pH 700 Benchtop Meter with “All-in-One” pH Electrode - 45) and nist (ph 1. 18, 12. Five-point ph calibration, with automatic buffer recognition for both usa (ph 1. 01, 7. 01, 6. The large, dual-display lcd provides excellent visibility-even from a distance. Meter accepts any ph or orp electrodes with a bnc connector. 00, 10. Designed for today’s crowded laboratory bench tops compact footprint is over 40 percent smaller than other bench top meters large display permits easier readout viewing data logging allows you to store and recall up to 100 data sets. 68, 4. 68, 4. The convenient pull-out quick reference card keeps procedures handy at all times. Automatic temperature compensation (atc) maintains reading accuracy even with fluctuating temperatures. What’s included universal 110/240 vac power supply and adapters. 01, 12. 86, 9. The easy-to-use, microprocessor-based ph 700 bench top meter measures ph, mv, relative mv, and temperature. Meter features hold, atc, selectable °f or °c measurement, recall of electrode slopand offset, and electrode diagnostics. 45) ph buffers, makes for easy calibration no matter which requirement you need to meet.

 

Oakton pH 110 Advanced Portable Meter

Oakton pH 110 Advanced Portable Meter

Oakton pH 110 Advanced Portable Meter - Recalls electrode slope, electrode offset, and 100 sets of stored readings. Meter kit includes meter, ph electrode, temperature probe, 20 solution pouches, sample bottle, batteries, instructions and carrying case. Dual ph (or mv) and °c/°f temperature display. Supplied software creates pc data files data can be printed continuously. Selectable manual or automatic temperature compensation. Advanced setup mode can display previous ph, mv, and temperature calibration data. Push-button five-point ph calibration and offset mv calibration. Downloads readings to computer or printer via rs-232 connection. Electrode bracket positions electrode for one-handed operation. Ergonomic design meter fits easily in the hand. Ready indicator alerts when reading has stabilized.

 

Oakton pH Calibration Buffer 401 10 L

Oakton pH Calibration Buffer, 4.01, 1.0 L

Oakton pH Calibration Buffer, 4.01, 1.0 L - 01 resolution are standardized against nist-traceable ph references within 0. Standardized against nist traceable materials. Oakton® buffers for meters with 0. Store buffers away from direct sunlight. Sold in individual bottles 500-ml bottles are also available in cases of 12, 4-l(1-gal) bottles in cases of four. 01 ph at 77°f (25°c).

 

Oakton pH 150 Waterproof Portable Meter Meter Only

Oakton pH 150 Waterproof Portable Meter; Meter Only

Oakton pH 150 Waterproof Portable Meter; Meter Only - Rugged, accurate, reliable, best value for an ip67-rated waterproof meter intuitive, user-friendly icons-electrode status displays ph slope. 700 hours battery-life or optional universal power adapter. Grip-cliptm holder quickly and easily secures the electrode to your beaker or container. Built-in stand and wall mount option allow for easy bench top measurement or storage. Mv offset for calibration of orp standards, zeroing mv value, and ph diagnostics. Expanded data logging for up to 150 data sets. Electrode must be ordered separately. What’s included grip-clip electrode holder and two aa batteries.

 

Oakton pH 6 Handheld Meter Kit with Case Solutions and pHATC Probe

Oakton pH 6+ Handheld Meter Kit with Case, Solutions, and pH/ATC Probe

Oakton pH 6+ Handheld Meter Kit with Case, Solutions, and pH/ATC Probe - Automatic temperature compensation (atc)ensures accuracy from 0 to 100°c. Meters include a protective rubber boot that also acts as a meter stand. What’s included atc probe, protective rubber boot, and batteries. 01 ph accuracy at an economical price convenient, compact design up to five-point push-button calibration with auto buffer recognition displays ph or mv and temperature with the press of a button. High +/-0. Meter kit also includes “all-in-one” ph electrode, ph buffer solutions, sample bottles, rinse bottle, and carrying case. These meters are perfect for fast, accurate results.

 

Oakton Waterproof Portable pHCON 10 Meter Kit

Oakton Waterproof Portable pH/CON 10 Meter Kit

Oakton Waterproof Portable pH/CON 10 Meter Kit - Automatic temperature compensation (atc) for accuracy. Simultaneous, dual-line lcd display of ph or conductivity (s or ms) and temperature readings in celsius for ease of viewing. Includes a three-in-one multi-sensor probe for broad scope of uses. Submersible, ten-foot cable for use in aqueous environments. Three point, push-button calibration for resolution across a wide range of results.

 

Oakton pH 5 Handheld Meter with pH Probe

Oakton pH 5+ Handheld Meter with pH Probe

Oakton pH 5+ Handheld Meter with pH Probe - All push button operation. Auto buffer recognition. Three-point ph calibration. Reads ph and temperature. Automatic temperature compensation (atc).

 

Oakton pH Probe RefillableFlushable PTFE DJEpoxy BNC

Oakton pH Probe, Refillable/Flushable PTFE DJ/Epoxy; BNC

Oakton pH Probe, Refillable/Flushable PTFE DJ/Epoxy; BNC - Oakton brand products. Manufactured by cole-parmer. Lab equipment & instruments. Oakton ph probe, refillable/flushable ptfe dj/epoxy bnc.

 

Oakton pH 6 Handheld Meter with pH Probe

Oakton pH 6+ Handheld Meter with pH Probe

Oakton pH 6+ Handheld Meter with pH Probe - What’s included atc probe, protective rubber boot, and batteries. Automatic temperature compensation (atc)ensures accuracy from 0 to 100°c. 01 ph accuracy at an economical price convenient, compact design up to five-point push-button calibration with auto buffer recognition displays ph or mv and temperature with the press of a button. Meters include a protective rubber boot that also acts as a meter stand. High +/-0. These meters are perfect for fast, accurate results.

 

Oakton pH 700 Benchtop Meter with Probes and Stand

Oakton pH 700 Benchtop Meter with Probes and Stand

Oakton pH 700 Benchtop Meter with Probes and Stand - Meter accepts any ph or orp electrodes with a bnc connector. 86, 9. 01, 12. 45) and nist (ph 1. 18, 12. 68, 4. 00, 10. Designed for today’s crowded laboratory bench tops compact footprint is over 40 percent smaller than other bench top meters large display permits easier readout viewing data logging allows you to store and recall up to 100 data sets. Five-point ph calibration, with automatic buffer recognition for both usa (ph 1. The convenient pull-out quick reference card keeps procedures handy at all times. The large, dual-display lcd provides excellent visibility-even from a distance. The easy-to-use, microprocessor-based ph 700 bench top meter measures ph, mv, relative mv, and temperature. 01, 7. 01, 6. 45) ph buffers, makes for easy calibration no matter which requirement you need to meet. Meter features hold, atc, selectable °f or °c measurement, recall of electrode slopand offset, and electrode diagnostics. 68, 4. What’s included universal 110/240 vac power supply and adapters. Automatic temperature compensation (atc) maintains reading accuracy even with fluctuating temperatures.

 

Oakton 12mm Single-Junction Epoxy Body Gel-Filled pH Electrode Standard 0 - 14 pH Range

Oakton 12mm Single-Junction Epoxy Body Gel-Filled pH Electrode, Standard, 0 – 14 pH Range

Oakton 12mm Single-Junction Epoxy Body Gel-Filled pH Electrode, Standard, 0 – 14 pH Range - Bayonet neill-concelman (bnc)-connected combination reference and measuring cell, for ease of use and to provide tight coaxial cable connections. Single-junction electrode for general-purpose applications. Epoxy body for impact resistance and durability. Sealed body for low maintenance use. Gel-filled electrolyte to enhance performance.