18 Greatest Addition Funnels for 2019

 

Chemglass CG-1702-04 Series CG-1702 Addition Funnel with 4 mm PTFE Stopcock 2440 Joint Size 435 mm Height 500 mL

Chemglass CG-1702-04 Series CG-1702 Addition Funnel with 4 mm PTFE Stopcock, 24/40 Joint Size, 435 mm Height, 500 mL

Chemglass CG-1702-04 Series CG-1702 Addition Funnel with 4 mm PTFE Stopcock, 24/40 Joint Size, 435 mm Height, 500 mL - Funnels with 14/20 and 19/22 joints are supplied complete with a stopper. With pressure equalizing arm and ptfe stopcock. Cylindrical style addition funnel with a standard taper top outer joint and lower inner joint, both being the same size.

 

Chemglass CG-1713-12 Glass Cylindrical Style Graduated Addition Funnel with 2mm PTFE Metering Stopcock 60mL Capacity

Chemglass CG-1713-12 Glass Cylindrical Style Graduated Addition Funnel, with 2mm PTFE Metering Stopcock, 60mL Capacity

Chemglass CG-1713-12 Glass Cylindrical Style Graduated Addition Funnel, with 2mm PTFE Metering Stopcock, 60mL Capacity - Cylindrical style addition funnel with a ptfe adjustable bore metering plug. Turning the adjustment knob allows flow rate to be controlled from dropwise to full flow.

 

Pressure Equalizing Addition Funnel 100mL Dropping Funnel Constant Pressure Funnel 2429 joint Glass Stopcock

Pressure Equalizing Addition Funnel 100mL Dropping Funnel Constant Pressure Funnel (24/29 joint, Glass Stopcock)

Pressure Equalizing Addition Funnel 100mL Dropping Funnel Constant Pressure Funnel (24/29 joint, Glass Stopcock) - Usually the product will be sent in 2-5 working days and takes about 3–9 business days to reach you.

 

250ml Addition Pressure Equalizing Funnel with glass stopcock 2440 joint

250ml Addition Pressure Equalizing Funnel, with glass stopcock, 24/40 joint

250ml Addition Pressure Equalizing Funnel, with glass stopcock, 24/40 joint - Glass stopcock special capacity, joint size, and custom made are available upon request. 3, 3, standardiso international standard 4, with 24/40 joint 5. 250ml pressure equalizing funnel, with glass stopcock, 24/40 joint made with borosilicate glass 3. 3, low linear coefficient of expansion and high annealing point 1, ca pacity 250ml, 2, material borosilicate glass 3.

 

Laboy HMF031815 Glass 1000 mL Addition Graduated Pressure Equalizing Dropping FunnelLines W 2440 Joint at Top and 2 mm PTFE Stopcock

Laboy HMF031815 Glass 1000 mL Addition Graduated Pressure Equalizing Dropping Funnel/Lines W/ 24/40 Joint at Top and 2 mm PTFE Stopcock

Laboy HMF031815 Glass 1000 mL Addition Graduated Pressure Equalizing Dropping Funnel/Lines W/ 24/40 Joint at Top and 2 mm PTFE Stopcock - Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling. Comparing to an ordinary dropping funnel, the pressure-equalizing dropping funnels have an additional narrow-bore glass tube from the upper part of the funnel bulb to the ground glass joint around the stem at bottom. With standard taper glass outer joint at top and inner joint at bottom, with ptfe stopcock upper on the bottom glass joint.

 

50mL Pressure Equalizing Addition Funnel Dropping Funnel 1922 joint Glass Stopcock

50mL Pressure Equalizing Addition Funnel Dropping Funnel (19/22 joint, Glass Stopcock)

50mL Pressure Equalizing Addition Funnel Dropping Funnel (19/22 joint, Glass Stopcock) - Usually the product will be sent in 2-5 working days and takes about 3–9 business days to reach you.

 

Kimble Glass 634530-0060 Graduated Addition Funnel with Pressure Equalizing Line Standard Taper No Stopper 60 mL Capacity

Kimble Glass 634530-0060 Graduated Addition Funnel with Pressure Equalizing Line, Standard Taper, No Stopper, 60 mL Capacity

Kimble Glass 634530-0060 Graduated Addition Funnel with Pressure Equalizing Line, Standard Taper, No Stopper, 60 mL Capacity - Not stopper. Standard taper. Graduations to the stopcock are numbered both up and down. Manufactured from 33 expansion, low extractable borosilicate glass conforming to usp type i and astm e438, type i, class a requirements. 60ml capacity.

 

Chemglass CG-1702-01 Glass Cylindrical Style Addition Funnel with 2mm PTFE Stopcock 60mL Capacity

Chemglass CG-1702-01 Glass Cylindrical Style Addition Funnel, with 2mm PTFE Stopcock, 60mL Capacity

Chemglass CG-1702-01 Glass Cylindrical Style Addition Funnel, with 2mm PTFE Stopcock, 60mL Capacity - With pressure equalizing arm and ptfe stopcock. Cylindrical style addition funnel with a standard taper top outer joint and lower inner joint, both being the same size. Funnels with 14/20 and 19/22 joints are supplied complete with a stopper.

 

Kimble Chase FUN ADD GL 50ML 2440 Graduated Addition Funnels with Pressure Equalizing Line - KMBL

Kimble Chase FUN ADD GL 50ML 24/40 Graduated Addition Funnels with Pressure Equalizing Line – KMBL

Kimble Chase FUN ADD GL 50ML 24/40 Graduated Addition Funnels with Pressure Equalizing Line – KMBL - Graduated funnels • cylindrical funnels have a pressure equalizing line, a glass stopcock, and a lower drip tip • graduations to the stopcock are numbered both up and down • the 299251 and 299250 series are supplied with an 850400 glass hex-head stopper the others are supplied without a stopper • manufactured from 33 expansion, low extractable borosilicate glass conforming to usp type i and astm e438, type i, class a requirements capacity (ml) 50 graduation intervals (ml) 1 height (mm) 275 standard taper joints 24/40 plug type glass replacement plug 305751-0221 stopcock bore size (mm) 2 top standard taper, no stopper case qty 1.

 

Kimble Chase FUNNEL VACUUM POWDER 2440 Powder Addition Funnels with Vacuum Hose Connection and Standard Taper Joint - KMBL

Kimble Chase FUNNEL VACUUM POWDER 24/40 Powder Addition Funnels with Vacuum Hose Connection and Standard Taper Joint – KMBL

Kimble Chase FUNNEL VACUUM POWDER 24/40 Powder Addition Funnels with Vacuum Hose Connection and Standard Taper Joint – KMBL - • Applying a vacuum cuts filling time in half • the funnels fit tubing id ¼” and have a 60° side angle and a standard taper inner joint • manufactured from 33 expansion, low extractable borosilicate glass conforming to usp type i and astm e438, type i, class a requirements id at funnel top (mm) 100 standard taper joints 24/40 case qty 1. Powder addition funnels with vacuum hose these funnels are ideal for adding solids or liquids to reaction set-ups under vacuum conditions.

 

Laboy HMF031813 Glass 500 mL Addition Graduated Pressure Equalizing Dropping FunnelLines W 2440 Joint at Top and 2 mm PTFE Stopcock

Laboy HMF031813 Glass 500 mL Addition Graduated Pressure Equalizing Dropping Funnel/Lines W/ 24/40 Joint at Top and 2 mm PTFE Stopcock

Laboy HMF031813 Glass 500 mL Addition Graduated Pressure Equalizing Dropping Funnel/Lines W/ 24/40 Joint at Top and 2 mm PTFE Stopcock - With standard taper glass outer joint at top and inner joint at bottom, with ptfe stopcock upper on the bottom glass joint. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling. Comparing to an ordinary dropping funnel, the pressure-equalizing dropping funnels have an additional narrow-bore glass tube from the upper part of the funnel bulb to the ground glass joint around the stem at bottom.

 

Chemglass CG-1712-03 Glass Cylindrical Style Graduated Addition Funnel with 2mm PTFE Stopcock 250mL Capacity

Chemglass CG-1712-03 Glass Cylindrical Style Graduated Addition Funnel, with 2mm PTFE Stopcock, 250mL Capacity

Chemglass CG-1712-03 Glass Cylindrical Style Graduated Addition Funnel, with 2mm PTFE Stopcock, 250mL Capacity - Cylindrical style addition funnel similar to cg-1710, but with a ptfe stopcock. Funnels with 14/20 and 19/22 joints are supplied complete with a stopper.

 

Laboy HMF032309 Glass Addition Graduated Pressure Equalizing Dropping FunnelLines 250 mL with 2440 Joints and High Vacuum Valve

Laboy HMF032309 Glass Addition Graduated Pressure Equalizing Dropping Funnel/Lines 250 mL with 24/40 Joints and High Vacuum Valve

Laboy HMF032309 Glass Addition Graduated Pressure Equalizing Dropping Funnel/Lines 250 mL with 24/40 Joints and High Vacuum Valve - Comparing to an ordinary dropping funnel, the pressure-equalizing dropping funnels have an additional narrow-bore glass tube from the upper part of the funnel bulb to the ground glass joint around the stem at bottom. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling. With standard taper glass outer joint at top and inner joint at bottom, with high vacuum valve.

 

Chemglass CG-1714-02 Glass Cylindrical Style Graduated Addition Funnel with 0-2mm PTFE Threaded Valve 125mL Capacity

Chemglass CG-1714-02 Glass Cylindrical Style Graduated Addition Funnel, with 0-2mm PTFE Threaded Valve, 125mL Capacity

Chemglass CG-1714-02 Glass Cylindrical Style Graduated Addition Funnel, with 0-2mm PTFE Threaded Valve, 125mL Capacity - Design of all ptfe plug permits semi-needle valve action. With a standard taper top outer joint and lower inner joint, both being the same size, and pressure equalizing arm. Cylindrical style graduated addition funnel has a threaded, grease-free extended tip valve. Funnels with 14/20 and 19/22 joints are supplied complete with a stopper.

 

Laboy HMF032111 Glass Addition Graduated Pressure Equalizing Dropping FunnelLines 250 mL with 2440 Joints and Two Glass Stopcocks

Laboy HMF032111 Glass Addition Graduated Pressure Equalizing Dropping Funnel/Lines 250 mL with 24/40 Joints and Two Glass Stopcocks

Laboy HMF032111 Glass Addition Graduated Pressure Equalizing Dropping Funnel/Lines 250 mL with 24/40 Joints and Two Glass Stopcocks - Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling. Comparing to an ordinary dropping funnel, the pressure-equalizing dropping funnels have an additional narrow-bore glass tube from the upper part of the funnel bulb to the ground glass joint around the stem at bottom. With standard taper glass outer joint at top and inner joint at bottom, with two glass stopcocks.

 

Laboy HMF031808 Glass 125 mL Addition Graduated Pressure Equalizing Dropping FunnelLines W 1420 Joint at Top and 2 mm PTFE Stopcock

Laboy HMF031808 Glass 125 mL Addition Graduated Pressure Equalizing Dropping Funnel/Lines W/ 14/20 Joint at Top and 2 mm PTFE Stopcock

Laboy HMF031808 Glass 125 mL Addition Graduated Pressure Equalizing Dropping Funnel/Lines W/ 14/20 Joint at Top and 2 mm PTFE Stopcock - With standard taper glass outer joint at top and inner joint at bottom, with ptfe stopcock upper on the bottom glass joint. Comparing to an ordinary dropping funnel, the pressure-equalizing dropping funnels have an additional narrow-bore glass tube from the upper part of the funnel bulb to the ground glass joint around the stem at bottom. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling.

 

Laboy HMF031810 Glass 125 mL Addition Graduated Pressure Equalizing Dropping FunnelLines W 2440 Joint at Top and 2 mm PTFE Stopcock

Laboy HMF031810 Glass 125 mL Addition Graduated Pressure Equalizing Dropping Funnel/Lines W/ 24/40 Joint at Top and 2 mm PTFE Stopcock

Laboy HMF031810 Glass 125 mL Addition Graduated Pressure Equalizing Dropping Funnel/Lines W/ 24/40 Joint at Top and 2 mm PTFE Stopcock - Comparing to an ordinary dropping funnel, the pressure-equalizing dropping funnels have an additional narrow-bore glass tube from the upper part of the funnel bulb to the ground glass joint around the stem at bottom. Laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in chemistry processes like heating and cooling. With standard taper glass outer joint at top and inner joint at bottom, with ptfe stopcock upper on the bottom glass joint.

 

Chemglass CG-1712-04 Glass Cylindrical Style Graduated Addition Funnel with 4mm PTFE Stopcock 500mL Capacity 2440 Joint

Chemglass CG-1712-04 Glass Cylindrical Style Graduated Addition Funnel, with 4mm PTFE Stopcock, 500mL Capacity, 24/40 Joint

Chemglass CG-1712-04 Glass Cylindrical Style Graduated Addition Funnel, with 4mm PTFE Stopcock, 500mL Capacity, 24/40 Joint - Funnels with 14/20 and 19/22 joints are supplied complete with a stopper. Cylindrical style addition funnel similar to cg-1710, but with a ptfe stopcock.