17 Greatest Cold Finger Condensers for 2020

 

C111420-1420 - Synthware Cold Finger Condensers with Drip Tip Kemtech America - Each #ad

C111420-14/20 – Synthware Cold Finger Condensers with Drip Tip, Kemtech America – Each

C111420-14/20 – Synthware Cold Finger Condensers with Drip Tip, Kemtech America – Each #ad - Extended offset lower tip for drop control.

 

ACE GLASS 9250-04 Cold Finger Condenser for Distillation Head and System 1420 Joint Size #ad

ACE GLASS 9250-04 Cold Finger Condenser for Distillation Head and System, 14/20 Joint Size

ACE GLASS 9250-04 Cold Finger Condenser for Distillation Head and System, 14/20 Joint Size #ad - This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation. Has two upper, glass, size a hose connections that take 5/16-inch tubing. Fits into 6606, 6609, and 6613 distillation heads. Cold finger accessory for standard distilling heads and systems.

 

Kemtech America C114250 Synthware Cold Finger Condenser Drip Tip 2440 Joint 250 mm Length Below Joint 10 mm Hose Connection #ad

Kemtech America C114250 Synthware Cold Finger Condenser, Drip Tip, 24/40 Joint, 250 mm Length Below Joint, 10 mm Hose Connection

Kemtech America C114250 Synthware Cold Finger Condenser, Drip Tip, 24/40 Joint, 250 mm Length Below Joint, 10 mm Hose Connection #ad - Ketch america c114250 synthase cold finger condenser, drip tip, 24/40 joint, 250mm length below joint, 10mm hose connection.

 

Corning - Pyrex Cold Finger Condensers w2440 Stan Taper Inner Joints EA1 #ad

Corning – Pyrex Cold Finger Condensers, w/24/40 Stan Taper Inner Joints, EA1

Corning – Pyrex Cold Finger Condensers, w/24/40 Stan Taper Inner Joints, EA1 #ad - This simple pyrex® cold finger condenser, of relatively low efficiency, is often used to regulate refluxing by adjusting the flow of air or water through it (dephlegmation). This condenser has a 24/40 inner standard taper joint and is a replacement part for organic chemistry kit, no. Is approximately 10mm. D. 6949. The tubulation o.

 

ACE GLASS 9720-13 Micro Condenser Cold Finger 11 Ace-Thread #ad

ACE GLASS 9720-13 Micro Condenser Cold Finger, 11 Ace-Thread

ACE GLASS 9720-13 Micro Condenser Cold Finger, 11 Ace-Thread #ad - Water connection tubing is 5mm o. D. Overall length, 200mm. Code -23 for use with 9718 reactor. Outside diameter is 10mm or 14mm to fit #11 or #15 can accommodate-thread respectively.

 

C114150-2440 - Synthware Cold Finger Condensers with Drip Tip Kemtech America - Each #ad

C114150-24/40 – Synthware Cold Finger Condensers with Drip Tip, Kemtech America – Each

C114150-24/40 – Synthware Cold Finger Condensers with Drip Tip, Kemtech America – Each #ad - Extended offset lower tip for drop control.

 

Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser 1420 Inner Joint 13 mm Length Below Joint #ad

Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 13 mm Length Below Joint

Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 13 mm Length Below Joint #ad - Condenser for use in refluxing from 1 to 20ml of solvent in flasks having a capacity of 5 to 50ml. Minimal surface area provides for better yields while providing adequate cooling. The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Cold finger extends either 5mm or 13mm below the joint and is used on a flask with the listed joint size. Hose connection is 10mm at the largest serration. Top hose connection is cooling inlet and middle hose connection is cooling outlet.

 

Wilmad LG-17516-100 Cold Finger Condenser3520 Ball Joint1938 Outer Joint #ad

Wilmad LG-17516-100 Cold Finger Condenser,35/20 Ball Joint,19/38 Outer Joint

Wilmad LG-17516-100 Cold Finger Condenser,35/20 Ball Joint,19/38 Outer Joint #ad - Scientists rely on the expertise and artistic skills of wilmad-labglass’ engineers and glass specialists to manufacture nmr and epr consumables and laboratory glassware of the highest quality. Used daily in academia, healthcare and chemical, petroleum and other industrial applications, wilmad offers 7000+ items as part of their standard catalog as well as custom fabrication for individual glassware, glass repair services and oem glass parts. Replacement glassware for wg-ev311 rotary evaporators.

 

Laboy Glass Cold Finger Condenser Reflux Cold Trap 100mm in Length Below 1420 Male Joint Sublimation Apparatus Reflux Reaction Distillation Apparatus Lab Glassware with Removable Hose Connections #ad

Laboy Glass Cold Finger Condenser Reflux Cold Trap 100mm in Length Below 14/20 Male Joint Sublimation Apparatus Reflux Reaction Distillation Apparatus Lab Glassware with Removable Hose Connections

Laboy Glass Cold Finger Condenser Reflux Cold Trap 100mm in Length Below 14/20 Male Joint Sublimation Apparatus Reflux Reaction Distillation Apparatus Lab Glassware with Removable Hose Connections #ad - With 14/20 inner joint between the hose connections and finger chamber,the length below the joint is 100mm. With two removable hose connections. Made of high quality borosilicate glass 33,heavy wall design,made by hand-blowing to ensure uniform wall thickness,durable and reusable. 100% 90 day money back guarantee simply return for a full refund,no question asked. A cold finger condenser is used to generate a cold surface on the immersion finger ,used in sublimation apparatus, reflux reaction or distillation apparatus.

 

ACE GLASS 9250-02 Cold Finger Condenser for Distillation Head and System 1410 Joint Size #ad

ACE GLASS 9250-02 Cold Finger Condenser for Distillation Head and System, 14/10 Joint Size

ACE GLASS 9250-02 Cold Finger Condenser for Distillation Head and System, 14/10 Joint Size #ad - This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 6606, 6609, and 6613 distillation heads. Cold finger accessory for standard distilling heads and systems. Has two upper, glass, size a hose connections that take 5/16-inch tubing.

 

GOWE Dewar Cold-Finger Condenser 300mm effective length ID80mmOD100mm joint 4038 for rotavap #ad

GOWE Dewar Cold-Finger Condenser 300mm effective length ID80mmOD100mm joint 40/38 for rotavap

GOWE Dewar Cold-Finger Condenser 300mm effective length ID80mmOD100mm joint 40/38 for rotavap #ad - Borosilicate glass 33 material & in stock(glass equipment). Dewar cold-finger condenser 300mm effective length id80mmod100mm joint 40/38 for rotavap.

 

Kemtech America C114150 Synthware Cold Finger Condenser Drip Tip 2440 Joint 150 mm Length Below Joint 10 mm Hose Connection #ad

Kemtech America C114150 Synthware Cold Finger Condenser, Drip Tip, 24/40 Joint, 150 mm Length Below Joint, 10 mm Hose Connection

Kemtech America C114150 Synthware Cold Finger Condenser, Drip Tip, 24/40 Joint, 150 mm Length Below Joint, 10 mm Hose Connection #ad - Ketch america c114150 synthase cold finger condenser, drip tip, 24/40 joint, 150mm length below joint, 10mm hose connection.

 

ACE GLASS 9250-08 Cold Finger Condenser for Distillation Head and System 1922 Joint Size #ad

ACE GLASS 9250-08 Cold Finger Condenser for Distillation Head and System, 19/22 Joint Size

ACE GLASS 9250-08 Cold Finger Condenser for Distillation Head and System, 19/22 Joint Size #ad - Cold finger accessory for standard distilling heads and systems. This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation. Has two upper, glass, size a hose connections that take 5/16-inch tubing. Fits into 6606, 6609, and 6613 distillation heads.

 

Chemglass CG-1375-03 Series CG-1375 Cold Finger Condenser for 4550 1420 #ad

Chemglass CG-1375-03 Series CG-1375 Cold Finger Condenser for 45/50 14/20

Chemglass CG-1375-03 Series CG-1375 Cold Finger Condenser for 45/50 14/20 #ad - The gregar extractor† is the first major advance in laboratory extractor design in over 100 years. Complete extractor is supplied with extractor body, cold finger condenser, extra coarse extraction thimble, and solvent guide. During solid extractions the extractor operates upon the principle of continuous solvent displacement, permitting the sample to be immersed in solvent at all times, thereby increasing the efficiency of the solid-solvent interactions. The design eliminates packing and/or channeling of solid samples normally associated with common soxhlet extractors. Developed by joseph gregar and ken anderson of argonne national laboratories, this extractor is the only unit on the market that can perform all three common types of extraction (see the illustrations). The cg-1506-17, 24/40 250ml round bottom flask and auxiliary condenser (cg-1213 or cg-1218-a) are sold separately.

 

Chemglass CG-3030-03 Series CG-3030 Cold Finger Condenser for Micro Sublimer #ad

Chemglass CG-3030-03 Series CG-3030 Cold Finger Condenser for Micro Sublimer

Chemglass CG-3030-03 Series CG-3030 Cold Finger Condenser for Micro Sublimer #ad - The sublime has a capacity of 3ml between the lower portion of the cold finger and the interior bottom of the flask. 5 grams. With 24/25 standard taper joints to connect the flask and cold finger condenser. Micro scale sublimer can be used with quantities as small as 0.

 

Chemglass CG-1222-14 Series CG-1222 Cold Finger Condenser 1420 Inner Joint 100 mm Length Below Joint #ad

Chemglass CG-1222-14 Series CG-1222 Cold Finger Condenser, 14/20 Inner Joint, 100 mm Length Below Joint

Chemglass CG-1222-14 Series CG-1222 Cold Finger Condenser, 14/20 Inner Joint, 100 mm Length Below Joint #ad - Condenser has an inner joint and a sealed lower drip tip for drop control. Of 10mm at the middle serration. Hose connections have an o. D.

 

ACE GLASS 5960-08 Series Allihn Condenser with Cold Finger Hose Barb for 38 Tubing Length Below Joint 110 mm 2440 Joint #ad

ACE GLASS 5960-08 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8″ Tubing, Length Below Joint 110 mm, 24/40 Joint

ACE GLASS 5960-08 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8″ Tubing, Length Below Joint 110 mm, 24/40 Joint #ad - Fits into 5943, 5945, and 5946 condensers. Has two upper, glass, size d hose connections that take 3/8-inch tubing. This cold finger has a 24/40 inner joint that fits inside the condenser’s upper outer joint and tube to provide added cooling ability and faster condensation. Cold finger accessory for standard allihn type condensers.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.