17 Best and Coolest Glass Microfiber Filters for 2019

 

Ahlstrom 1610-1500 Borosilicate Glass Microfiber Filter Paper 11 Micron Medium Flow Grade 161 15cm Diameter Box of 100

Ahlstrom 1610-1500 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 15cm Diameter (Box of 100)

Ahlstrom 1610-1500 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 15cm Diameter (Box of 100) - This popular grade offers finer particle retention and higher flow rate than traditional analytical filter papers. Microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Standard glass microfiber filters. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut. Grade 161 is used in general laboratory applications, cell harvesting, liquid scintillation counting, and in the monitoring of air and water pollution. Grade 161 is generally recommended for water pollution monitoring techniques for total suspended solids. It is also found in the filtration of hot gases and liquids, and in pre-filtration.

 

Whatman 1827-110 934-AH Glass Microfiber Filters 15um 11cm 100Box

Whatman 1827-110 934-AH Glass Microfiber Filters, 1.5um, 11cm; 100/Box

Whatman 1827-110 934-AH Glass Microfiber Filters, 1.5um, 11cm; 100/Box - Use up to 550°c (1022°f). Glass microfiber filter papers are made entirely of borosilicate glass and contain no binders. Our whatman® filter papers offer you flexibility in filter choice without sacrificing quality. The industry standard for high-purity filtration available in a variety of grades and sizes. All filters are packaged 100 per box.

 

Whatman 1822-150 Glass Microfiber Binder Free Filter 12 Micron 67 s100mL Flow Rate Grade GFC 150cm Diameter Pack of 100

Whatman 1822-150 Glass Microfiber Binder Free Filter, 1.2 Micron, 6.7 s/100mL Flow Rate, Grade GF/C, 15.0cm Diameter (Pack of 100)

Whatman 1822-150 Glass Microfiber Binder Free Filter, 1.2 Micron, 6.7 s/100mL Flow Rate, Grade GF/C, 15.0cm Diameter (Pack of 100) - It is the standard filter in many parts of the world for the collection of suspended solids in potable water and natural and industrial wastes. 100/pack. Diameter 15. Retention 1. 0cm. This whatman gf/c glass microfiber filter combines fine particle retention with good flow rate. It provides fast and efficient clarification of aqueous liquids containing low to medium levels of fine particulates. This filter is widely used for cell harvesting, liquid scintillation counting and binding assays where more loading capacity is required. 2µm. Whatman # 1822-150.

 

LabExact 1200149 Grade TSS Glass Microfiber Filter Binderless Borosilicate Glass 15µm 90cm Pack of 100

LabExact 1200149 Grade TSS Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 9.0cm (Pack of 100)

LabExact 1200149 Grade TSS Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 9.0cm (Pack of 100) - Liquid filtration properties have been specifically designed for epa methods 2540c and 2540d for testing dissolved and suspended solids in water and wastewater. Excellent wet strength. 50um. Other common applications include gravimetric analysis of air pollutants, membrane support pads, membrane prefilters, clarification of reagent and buffer solutions, filtration of eluent for hplc and moisture analysis pads. Grade tss is a binderless high efficiency (hepa type) filter medium with particle retention of 1. Binderless borosilicate glass fiber media has no added extractables to aid in the elimination of sample contamination. High flow rate with high capacity.

 

LabExact 1200024 Grade 934AH Glass Microfiber Filter Binderless Borosilicate Glass 15µm 21cm Pack of 100

LabExact 1200024 Grade 934AH Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 2.1cm (Pack of 100)

LabExact 1200024 Grade 934AH Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 2.1cm (Pack of 100) - 2). Fine porosity, fast flow rate with a 1. 5 um size particle retention. Labexact 934-ah glass microfiber filters are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. Binderless borosilicate glass microfiber enables use up to 550ºc. This material is the standard for suspended solids content and related measurements (standard methods 2540d and epa method 160. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. Also widely used in cell harvesting applications and ria scintillation counting. Glass microfiber filters without binders are an ideal medium to entrap sediment for further analysis and counting due to the inert matrix. Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. The fibers used to manufacture these depth filters are smooth and uniform. Also, depth filtration media are commonly used for prefiltration prior to surface filtration with substrates such as membranes. The efficiency rating of the filter is characteristic of the complex void space structure that develops as the fibers overlap. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter because of the characteristically high flow rates of depth filters, they are generally used in applications such as single and multi process removal of sediment and coarse particulate. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity.

 

Ahlstrom 1610-2400 Borosilicate Glass Microfiber Filter Paper 11 Micron Medium Flow Grade 161 24cm Diameter Box of 100

Ahlstrom 1610-2400 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 24cm Diameter (Box of 100)

Ahlstrom 1610-2400 Borosilicate Glass Microfiber Filter Paper, 1.1 Micron, Medium Flow, Grade 161, 24cm Diameter (Box of 100) - Offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. Grade 161 is used in general laboratory applications, cell harvesting, liquid scintillation counting, and in the monitoring of air and water pollution. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. It is also found in the filtration of hot gases and liquids, and in pre-filtration. Grade 161 is generally recommended for water pollution monitoring techniques for total suspended solids. This popular grade offers finer particle retention and higher flow rate than traditional analytical filter papers. Microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Standard glass microfiber filters. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut.

 

Whatman 1823-024 Glass Microfiber Binder Free Filter 27 Micron 22 s100mL Flow Rate Grade GFD 24cm Diameter Pack of 100

Whatman 1823-024 Glass Microfiber Binder Free Filter, 2.7 Micron, 2.2 s/100mL Flow Rate, Grade GF/D, 2.4cm Diameter (Pack of 100)

Whatman 1823-024 Glass Microfiber Binder Free Filter, 2.7 Micron, 2.2 s/100mL Flow Rate, Grade GF/D, 2.4cm Diameter (Pack of 100) - Glass microfiber filter retention 27µm diameter 24cm. Will provide good protection for finely retentive membranes. Faster in flow rate and overall filtration speed than cellulose filter. Grade gf/d circles 24mm. Designed as a membrane prefilter and available in sizes to fit most holders.

 

LabExact 1200380 Grade F Glass Microfiber Filter Binderless Borosilicate Glass 07µm 90cm Pack of 100

LabExact 1200380 Grade F Glass Microfiber Filter, Binderless Borosilicate Glass, 0.7µm, 9.0cm (Pack of 100)

LabExact 1200380 Grade F Glass Microfiber Filter, Binderless Borosilicate Glass, 0.7µm, 9.0cm (Pack of 100) - Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. The efficiency rating of the filter is characteristic of the complex void space structure that develops as the fibers overlap. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. Frequently used with grade d to filter diluted aqueous solutions containing strong oxidizing, acidic, or alkaline components prior to laser spectroscopy. May also be used for tclp analysis and collecting extremely fine precipitated proteins, including immunoglobulins. 7um size particle retention. The fibers used to manufacture these depth filters are smooth and uniform. Grade f fine porosity, medium flow rate, with a 0. Glass microfiber filters are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents.

 

Thomas B1100 Borosilicate Glass Microfiber Filter 1 Micron Medium-Fast Flow Grade B 11cm Diameter Pack of 100

Thomas B1100 Borosilicate Glass Microfiber Filter, 1 Micron, Medium-Fast Flow, Grade B, 11cm Diameter (Pack of 100)

Thomas B1100 Borosilicate Glass Microfiber Filter, 1 Micron, Medium-Fast Flow, Grade B, 11cm Diameter (Pack of 100) - Glass micro fiber filters are available without binders, making the inertmatrix an ideal medium to entra-sediment for further analysis and counting. This material is twice as thick as grade a with a higher loading capacity. The fibrous material within the filter is commonly glass micro fiber or polypropylene. Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. Also, depth filtration media is commonly used as pre-filtration prior to surface filtration substrates such as membranes. Because of the characteristically high flow rates of depth filters, they are generally used in applications such as single and multi-process removal of sediment and course particulate. Depth filtration glass micro fiber. Binderless borosilicate glass microfiber. The efficiency rating of the filter is characteristic of the complex pore structure that develops as the fibers overlap. May also be used as a solid particulate filter for gasses or as a prefilter. In depth filters such as glass micro fiber, the purity of the filter is dictated by the presence of, if any, binder material that acts as a strengthening agent and aids in holding the fibers together. 140 grams per meter squared basis weight. Fine porosity, medium to fast flow rate, with a 1 micrometer size particle retention. Ideally suited for the collection of biochemical polymers that have been precipitated by denaturation.

 

Whatman 1825-047 Glass Microfiber Qualitative Grade GFF Filter Paper 47 cm Diameter

Whatman 1825-047 Glass Microfiber Qualitative Grade GF/F Filter Paper, 4.7 cm Diameter

Whatman 1825-047 Glass Microfiber Qualitative Grade GF/F Filter Paper, 4.7 cm Diameter - The unit is composed of medical grade polypropylene, compatible with most solutions. This filter is available in the filter cup and disposable filter funnel format. This convenient device is molded from polypropylene with an integral, heat bonded filter for easy filtration. The filtercup is a disposable filter funnel available with a range of 70 mm whatman brand filter media. The filter media can be easily removed for further analysis. 8 µm particle retention and pure borosilicate glass structure. 7 µm. 7 µm retains fine particles down to 0. 6 µm, 0. Whatman glass microfiber filters gf/f this high-efficiency filter grade gf/f 0. Unlike membrane filters with a comparable retention value, it has a very rapid flow rate and extremely high loading capacity. It is very effective in filtering finely precipitated proteins. That is due to the tight specification of 0. Gf/f can be used in conjunction with gf/d as a pre-filter for the successful clarification of extremely ‘difficult’ biochemical solutions and fluids, and nucleic acids. Gf/f is the material upon which the epa method tclp 1311 for toxicity characteristic leaching procedure was developed. The whatman disposable filter funnels are available in 25 and 47 mm diameters and are convenient filter funnels containing whatman brand filter media. Gf/f is recommended for dna binding and purification.

 

LabExact 1200022 Grade 934AH Glass Microfiber Filter Binderless Borosilicate Glass 15µm 125cm Pack of 100

LabExact 1200022 Grade 934AH Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 12.5cm (Pack of 100)

LabExact 1200022 Grade 934AH Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 12.5cm (Pack of 100) - In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter because of the characteristically high flow rates of depth filters, they are generally used in applications such as single and multi process removal of sediment and coarse particulate. Depth filtration categorizes filter media that traps particulate within the random matrix of fibers found within the thickness of the media. Also widely used in cell harvesting applications and ria scintillation counting. 5 um size particle retention. Labexact 934-ah glass microfiber filters are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. Also, depth filtration media are commonly used for prefiltration prior to surface filtration with substrates such as membranes. Glass microfiber filters without binders are an ideal medium to entrap sediment for further analysis and counting due to the inert matrix. 2). This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. The efficiency rating of the filter is characteristic of the complex void space structure that develops as the fibers overlap. This material is the standard for suspended solids content and related measurements (standard methods 2540d and epa method 160. Binderless borosilicate glass microfiber enables use up to 550ºc. The fibers used to manufacture these depth filters are smooth and uniform. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. Fine porosity, fast flow rate with a 1.

 

Ahlstrom 1310-2400 Borosilicate Glass Microfiber Filter 10 Micron Medium Flow Grade 131 24cm Diameter Pack of 100

Ahlstrom 1310-2400 Borosilicate Glass Microfiber Filter, 1.0 Micron, Medium Flow, Grade 131, 24cm Diameter (Pack of 100)

Ahlstrom 1310-2400 Borosilicate Glass Microfiber Filter, 1.0 Micron, Medium Flow, Grade 131, 24cm Diameter (Pack of 100) - Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, fine particle retention 0. Ahlstrom 131 is recommended for the collection of suspended solids in potable water and in industrial wastes. Ahlstrom glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. This standard grade found in many environmental applications offers slightly more retention than ahlstrom 111 with slightly lower filtration speed and loading capacity. 1 micrometer, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut. Standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Applications for ahlstrom glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. 7 micrometer, 3. In biochemical tests, ahlstrom 131 is suited for cell harvesting, liquid scintillation counting and the analysis of carbohydrates. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. Ahlstrom offers a full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass.

 

Whatman 1827-055 934-AH Glass Microfiber Filters 15um 55cm 100Box

Whatman 1827-055 934-AH Glass Microfiber Filters, 1.5um, 5.5cm; 100/Box

Whatman 1827-055 934-AH Glass Microfiber Filters, 1.5um, 5.5cm; 100/Box - All filters are packaged 100 per box. Glass microfiber filter papers are made entirely of borosilicate glass and contain no binders. Our whatman® filter papers offer you flexibility in filter choice without sacrificing quality. The industry standard for high-purity filtration available in a variety of grades and sizes. Use up to 550°c (1022°f).

 

Whatman 1823-047 GFD Glass Microfiber Filters 27um 47cm 100Box

Whatman 1823-047 GF/D Glass Microfiber Filters, 2.7um, 4.7cm; 100/Box

Whatman 1823-047 GF/D Glass Microfiber Filters, 2.7um, 4.7cm; 100/Box - Can be used in combination with gf/b to provide very efficient graded prefilter protection for membranes. The whatman gf/d glass microfiber filter is considerably faster in flow rate and overall filtration speed than cellulose filter papers of similar particle retention. Gf/d will provide good protection for finely retentive membranes. Diameter 4. 7µm. Retention 2. The filter is thick and consequently exhibits a high loading capacity. 100/pack. Designed as a membrane prefilter and available in sizes to fit most holders. 7cm. Whatman # 1823-047.

 

Whatman 1827-090 934-AH Glass Microfiber Filters 90 cm dia 100Box

Whatman 1827-090 934-AH Glass Microfiber Filters, 9.0 cm dia, 100/Box

Whatman 1827-090 934-AH Glass Microfiber Filters, 9.0 cm dia, 100/Box - All filters are packaged 100 per box. The industry standard for high-purity filtration available in a variety of grades and sizes. Our whatman® filter papers offer you flexibility in filter choice without sacrificing quality. Use up to 550°c (1022°f). Glass microfiber filter papers are made entirely of borosilicate glass and contain no binders.

 

LabExact 1200148 Grade TSS Glass Microfiber Filter Binderless Borosilicate Glass 15µm 70cm Pack of 100

LabExact 1200148 Grade TSS Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 7.0cm (Pack of 100)

LabExact 1200148 Grade TSS Glass Microfiber Filter, Binderless Borosilicate Glass, 1.5µm, 7.0cm (Pack of 100) - Grade tss is a binderless high efficiency (hepa type) filter medium with particle retention of 1. 50um. Binderless borosilicate glass fiber media has no added extractables to aid in the elimination of sample contamination. Excellent wet strength. Liquid filtration properties have been specifically designed for epa methods 2540c and 2540d for testing dissolved and suspended solids in water and wastewater. Other common applications include gravimetric analysis of air pollutants, membrane support pads, membrane prefilters, clarification of reagent and buffer solutions, filtration of eluent for hplc and moisture analysis pads. High flow rate with high capacity.

 

Ahlstrom 1410-0370 Borosilicate Glass Microfiber Filter Paper 31 Micron Fast Flow Grade 141 37cm Diameter Box of 100

Ahlstrom 1410-0370 Borosilicate Glass Microfiber Filter Paper, 3.1 Micron, Fast Flow, Grade 141, 3.7cm Diameter (Box of 100)

Ahlstrom 1410-0370 Borosilicate Glass Microfiber Filter Paper, 3.1 Micron, Fast Flow, Grade 141, 3.7cm Diameter (Box of 100) - 7 micrometer, 3. Applications for glass microfiber filters include environmental analysis for water, wastewater, testing of soils, air pollution and monitoring, research and process biochemistry, and gravimetric analysis involving ignition of samples. Laboratory analysis, 100 percent pure borosilicate glass, rapid flow rate, fine particle retention 0. Grade 141 is particularly recommended for pre-filtration of membrane filters and is also used in combination with grade 121 as a highly efficient protective and retentive grade density pre-filter for membrane filters. Glass microfiber filters are also found in the filtration of hot gases and liquids, and in pre-filtration. 1 micrometer, high loading capacity, chemical and thermal resistance (up to 500 degree c), long shelf life, brilliant white color reflecting more than 96 percent of visible light, custom cut, standard glass microfiber filters contain no binders or other additives that may cause interference to sensitive enzymatic or other chemical reactions. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is required. The unique characteristics of glass microfiber filters make its use particularly advantageous to laboratory filtration by enabling fast filtration of large volumes and difficult solutions without premature clogging. A full range of glass microfiber filters manufactured from 100 percent pure borosilicate glass. Fast speed, this grade offers better filtration speed and a higher loading capacity than an analytical filter paper of similar particle retention.