16 Most Wanted Viscosity Cups

 

Zahn Immersion Viscosity Cup Viscometer 44ml Cup Volume 12345 for Test the Viscosity of Newtonian or Approximate Newtonian Liquid NO2 Zahn Cup #ad

Zahn Immersion Viscosity Cup Viscometer 44ml Cup Volume (#1/#2/#3/#4/#5) for Test the Viscosity of Newtonian or Approximate Newtonian Liquid (NO.2 Zahn Cup)

Zahn Immersion Viscosity Cup Viscometer 44ml Cup Volume (#1/#2/#3/#4/#5) for Test the Viscosity of Newtonian or Approximate Newtonian Liquid (NO.2 Zahn Cup) #ad - 3viscosity is expressed in zahn seconds which are correlated to viscosity in centistokes. 4mainly in order to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect. 2quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil. 1according to astm d 4212 (standard test method for viscosity cup immersion)standards.

 

Gardco EZ2 Series Viscosity Cup 2 19 to 156 Centistokes #ad

Gardco EZ2 Series Viscosity Cup #2, 19 to 156 Centistokes

Gardco EZ2 Series Viscosity Cup #2, 19 to 156 Centistokes #ad - Simply fill the cup by immersing it in the test liquid. Each stainless steel cup meets dimensions as specified in astm d 4212 standards. Easily measure viscosity using an ez viscosity cup and a stopwatch. After withdrawing the cup, measure the time it takes until the first break in the liquid stream. An easy and economical way to measure viscosity ±3% production tolerance. Each cup is supplied with a conversion table to determine viscosity in centistokes (cst) from the elapsed time.

 

Zahn Type - Viscosity Cup 1 TC 260 without Certificate by Automation Dr Nix #ad

Zahn Type – Viscosity Cup 1 TC 260 (without Certificate) by Automation Dr. Nix

Zahn Type – Viscosity Cup 1 TC 260 (without Certificate) by Automation Dr. Nix #ad - 15 4. 11 3. 74/0. 98/0. Model no. 5-80 20-80 20-75 20-80 20-80 centistokes range 5-56 21-231 146-848 222-1110 460-1840 applications very thin oil thin oil,paint lacquer medium oil mixed paint viscous liquid and mixtures very viscous mixtures (zahn type, viscosity cup 1 tc 260 (without certificate) by automation dr. 27/0. 17 5. 76/0. Kt 260-1 kt 260-2 kt 260-3 kt 260-4 kt 260-5 zahn cup zahn cup 1# zahn cup 2# zahn cup 3# zahn cup 4# zahn cup 5# orificє(cm/inches) 1. 08 2. 21 zahn range (sec) 33. Nix). 28/0.

 

BYK-Gardner 8206 Zahn Cup Dip Viscosity Cup No 1 Certified 20-84 Seconds Range 60 Max Centistokes Range #ad

BYK-Gardner 8206 Zahn Cup Dip Viscosity Cup No. 1 Certified, 20-84 Seconds Range, 60 Max Centistokes Range

BYK-Gardner 8206 Zahn Cup Dip Viscosity Cup No. 1 Certified, 20-84 Seconds Range, 60 Max Centistokes Range #ad - To convert zahn-seconds to centistokes, refer to astm d 4212. Byk-gardner dip viscosity cups (zahn type) may be used anywhere, in shops, factories and laboratories, for quickly checking and adjusting the viscosity of many different types of liquids. Results should be reported in zahn-seconds at a specified temperature for a particular cup. At the center of this handle is a finger-ring for holding the cup in a vertical position during use. Each cup has a 12-inch loop handle to allow the cup to be dipped by hand into a liquid container.

 

Huanyu Instrument ZAHN VISCOSITY CUPZahn Cup Viscometer Cup 5 Cup 44ml Cup Volume #ad

Huanyu Instrument ZAHN VISCOSITY CUP/Zahn Cup Viscometer Cup #5 Cup 44ml Cup Volume

Huanyu Instrument ZAHN VISCOSITY CUP/Zahn Cup Viscometer Cup #5 Cup 44ml Cup Volume #ad - Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil. Compact and easy to use. Viscosity is expressed in zahn seconds which are correlated to viscosity in centistokes. According to astm d 4212 (standard test method for viscosity cup immersion)standards.

 

Huanyu Instrument ZAHN VISCOSITY CUPZahn Cup Viscometer Cup 3 Cup 44ml Cup Volume #ad

Huanyu Instrument® ZAHN VISCOSITY CUP/Zahn Cup Viscometer Cup #3 Cup 44ml Cup Volume

Huanyu Instrument® ZAHN VISCOSITY CUP/Zahn Cup Viscometer Cup #3 Cup 44ml Cup Volume #ad - Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil. Compact and easy to use. According to astm d 4212 (standard test method for viscosity cup immersion)standards. Viscosity is expressed in zahn seconds which are correlated to viscosity in centistokes.

 

Zahn 2 cheap portable viscometer Zahn Cup Viscosity Cup for for materials laboratory , White #ad

Zahn 2# cheap portable viscometer Zahn Cup Viscosity Cup for for materials laboratory , White

Zahn 2# cheap portable viscometer Zahn Cup Viscosity Cup for for materials laboratory , White #ad - 93mm 5-60cst 35-80sec. Zahn 2# 44ml Φ2. Weight 0. 86mm 100-800cst 20-80sec. Specification type volume of cup inner dia. Zahn 4# 44ml Φ4. 41mm 400-1800cst 20-80sec. 69mm 20-250cst 20-80sec. Of orifice range of measurment efflux time(sec) zahn 1# 44ml Φ1. Zahn 5# 44ml Φ5. Introduce our zahn cup is according to the american society for materials laboratory, paint and raw material standard astm numbers d4212-93 standard test method of immersion viscosity cup of relevant regulations, combined with the actual production. Zahn 3# 44ml Φ3. 14kg dimensions 380 × 70 × 80mm (l × w × h). 39mm 200-1200cst 20-80sec.

 

44ml Stainless Steel Zahn Cups 1 Paint Viscosity Cup #ad

44ml Stainless Steel Zahn Cups 1 Paint Viscosity Cup

44ml Stainless Steel Zahn Cups 1 Paint Viscosity Cup #ad - 1 hole diameter 2. Mainly for the printing process remains stable viscosity of the ink, the ink viscosity never exceeds the set range, in order to protect the color values of printing effect. 3. Widely used in gravure, lithographic, flexographic, silk edition ect. Make of stainless steel material,typically used in industrial paint viscosity measurement instruments. Description 44ml stainless steel zahn cups 1 paint viscosity cup specification cup material stainless steel cup no. 69 measuring range 20-250 flow time 20 ~ 80 cup volume 44ml total length 340mm cup inner diameter 33mm cup height57mm weight 68g the 2th cup diluent oil, mixing paints, varnishes features 1. 2. Package included 1 x stainless steel zahn cups.

 

4 Zahn Cup Viscosity Cup Viscometer Flow Cup 4 Brand New  White #ad

4# Zahn Cup Viscosity Cup Viscometer Flow Cup 4# Brand New , White

4# Zahn Cup Viscosity Cup Viscometer Flow Cup 4# Brand New , White #ad - Weight 0. 41mm 400-1800cst 20-80sec. Specification type volume of cup inner dia. 86mm 100-800cst 20-80sec. 93mm 5-60cst 35-80sec. Zahn 2# 44ml Φ2. Of orifice range of measurment efflux time(sec) zahn 1# 44ml Φ1. Zahn 4# 44ml Φ4. 39mm 200-1200cst 20-80sec. Zahn 5# 44ml Φ5. 69mm 20-250cst 20-80sec. 14kg dimensions 380 × 70 × 80mm (l × w × h). Introduce our zahn cup is according to the american society for materials laboratory, paint and raw material standard astm numbers d4212-93 standard test method of immersion viscosity cup of relevant regulations, combined with the actual production. Zahn 3# 44ml Φ3.

 

BYK-Gardner 0176 Ford Viscosity Cup No 4 Non-Certified #ad

BYK-Gardner 0176 Ford Viscosity Cup No. 4, Non-Certified

BYK-Gardner 0176 Ford Viscosity Cup No. 4, Non-Certified #ad - Ford viscosity cups have been produced by gardner laboratory for over forty years. Each cup produced has been in conformance with viscosity cup flow characteristics. The ford viscosity cups are guaranteed to be within 3% (drain time of calibration oil) throughout the recommended use range. The cups are for low viscosity liquids, their body made of solid bar aluminum and have a stainless steel orifice. They are calibrated against standard oils referenced to certified nist (national institute of standards and technology) oils.

 

NK-2 Viscosity Cup Viscometer Flow Cup Stainless Steel Viscosity Cup 50ml #ad

NK-2 Viscosity Cup Viscometer Flow Cup Stainless Steel Viscosity Cup 50ml

NK-2 Viscosity Cup Viscometer Flow Cup Stainless Steel Viscosity Cup 50ml #ad - Operation immerse the cup in the fluid & horizontal surface of the fluid is lower the rim of the cup, take out the cup vertically, meantime press the stop watch, the first break in the liquid’s flow is measured-need to evaluate, must measure for 3 times continuously & get the average value of the 3 measurements, it’s the flow time of the fluid. 1mm inner hole dia 3. 5mm viscosity scope70~370 cst flow out time20~100sec dimension280x40x40mm(lxwxh) notice a high precision of stop watch is required while using. It’s widely used for electronic products & plastic-used fluid. Specification volume50ml cup material stainless steel vertical height43±0. 5±0. 05mm outer hold dia6. 0±0. Usually the product will be sent in 2-5 working days and takes about 3–9 business days to reach you introduction nk-2 iwata viscosity cup, japan jis standard, applicable to quick test of viscosity of fluid of newton or newton-like in job site.

 

ZAHN 2 Viscosity Cup #ad

ZAHN #2 Viscosity Cup

ZAHN #2 Viscosity Cup #ad - Retest following each step again. The viscosity meter will accurately measure many different varieties of materials including but not limited to lacquers sealers enamels stains oils and waterbornes. Understanding your viscosity meter using apollo-spray viscosity meter is an accurate way of measuring the thickness/viscosity of a coating in order to ensure a fine finish. To use dip the viscosity meter into the coating start the stopwatch as soon as you pull the cup out of the material the coating will run out of the hole in the bottom of the cup in a steady stream as soon as you see the first break in the stream stop the watch the time showns is equivelent to #2 zahn seconds clean the cup and store if the time you get is more than the recommended or desired time than you need to thin your material use the appropriate thinner to the correct proprtion for your mixture. Continue to thin until the desired viscosity is reached or until you reach the maximum thinning recommended by the manufacturer of the coating you are trying to spray.

 

Zahn Immersion Viscosity Cup Viscometer 44ml Cup Volume 12345 for Test the Viscosity of Newtonian or Approximate Newtonian Liquid NO3 Zahn Cup #ad

Zahn Immersion Viscosity Cup Viscometer 44ml Cup Volume (#1/#2/#3/#4/#5) for Test the Viscosity of Newtonian or Approximate Newtonian Liquid (NO.3 Zahn Cup)

Zahn Immersion Viscosity Cup Viscometer 44ml Cup Volume (#1/#2/#3/#4/#5) for Test the Viscosity of Newtonian or Approximate Newtonian Liquid (NO.3 Zahn Cup) #ad - 2quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil. 1according to astm d 4212 (standard test method for viscosity cup immersion)standards. 3viscosity is expressed in zahn seconds which are correlated to viscosity in centistokes. 4mainly in order to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect.

 

4mm Portable Aluminum DIN Immersion Viscosity Cup Viscometer According to DIN 53 211 #ad

4mm Portable Aluminum DIN Immersion Viscosity Cup Viscometer According to DIN 53 211

4mm Portable Aluminum DIN Immersion Viscosity Cup Viscometer According to DIN 53 211 #ad - And we can also send the product to you as soon as possible if you have any questions , please feel free to contact us. The cup and iwata spray gun together become essential plant construction tools. The main technical parameters nozzle hole diameter Φ4 mm range of measurment:96-683 cst efflux time (in seconds) 20-110 s usage 1using a suitable solvent to wipe clean, when before or after the cup be used。 2put the cup into the container body 1- 5 minutes, to achieve thermal equilibrium of the cup body,then put the cup body vertical lift from the feedstock, the action should be fast and stable. 3timekeeping when the upper end of the cup leave from the surface of liquid, and liquid should be kept out of the cup vertically, with the surface distance of not more than 150mm. Note please give us your phone number which is to ensure a smooth and safe delivery. 4 stop timing when the first breakpoint occurs, and the difference between the two measured values should be less than 5% of the average. Product description applicable to the construction site to quickly measure the viscosity of the paint to be sprayed more widely used in electronic products, plastic coatings industry.

 

Huanyu Instrument BEVS DIN Cup Viscosity Cup 100 ml 2468 BEVS 11088 #ad

Huanyu Instrument® BEVS DIN Cup Viscosity Cup 100 ml 2#4#6#8# (BEVS 1108/8)

Huanyu Instrument® BEVS DIN Cup Viscosity Cup 100 ml 2#4#6#8# (BEVS 1108/8) #ad - Huanyu instrument the product usually takes 7–13 business days to arrive to your hand after your order is confirmed . 02mm volume 100 ml material cup body-aluminum alloy,nozzle-stainless steel bevs 1108/2 2mm(orifice), 15~30cst(viscosity range) bevs 1108/4 4mm(orifice), 112~685cst(viscosity range) bevs 1108/6 6mm(orifice),550~1500cst(viscosity range) bevs 1108/8 8mm(orifice), 1200~3000cst(viscosity range) friendly reminder we will try our best to provide you the best product and service, welcome to buy our product. Introduction  bevs din cup is designed according to din 53211 standard and adapted to test the thin liquid at low viscosity. Technical specification orifice precision ± 0. Please contact us if you have any question,and we will reply it as soon as possible.

 

BYK-Gardner PV-8202 Zahn Viscosity Cup number 2 30 to 230 cSt 22 to 80 sec #ad

BYK-Gardner PV-8202 Zahn Viscosity Cup, number 2, 30 to 230 cSt, 22 to 80 sec

BYK-Gardner PV-8202 Zahn Viscosity Cup, number 2, 30 to 230 cSt, 22 to 80 sec #ad - Description zahn viscosity cup, number 2, 30 to 230 cst, 22 to 80 sec. Number of items 1. Cup number 2. Viscosity 30 to 230 cst.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.