16 Greatest Vwrs

 

VWR Centrifugal Filters

VWR® Centrifugal Filters

VWR® Centrifugal Filters - Filter housings are constructed of polypropylene and are available with a polyethersulfone (pes) or nylon membrane. Filters with nylon membrane are ideal for prefiltration clean-up of large agarose or acrylamide gel debris prior to further purification with an mwco device. Use to concentrate, purify, and desalt peptides, proteins, oligonucleotides, dna, and rna clean up labeling and pcr reactions isolate dna from agarose gel slices buffer exchange separate proteins, oligonucleotides, and rna from acrylamide gels clarify samples or remove particulates.

 

Acrylic Needle Dispenser - VWR Tube Racks

Acrylic Needle Dispenser – VWR Tube Racks

Acrylic Needle Dispenser – VWR Tube Racks - This sturdy acrylic rack keeps blood collection tubes easily accessible for phlebotomists. When fully stocked, you wonâ€tmt have to worry about finding more supplies half way through your day. Sturdy acrylic construction slanted compartment design easy to access and keep organized the slanted compartments prevent tubes from rolling out and place tubes at an easy-to-grab angle. The extra-large tube rack is the best option for high-volume departments. The top storage area has individual compartments to keep additional supplies neatly organized and easily accessible.

 

VWR Glass Petri Dish 150x20mm Case of 12 Tops 89000-326 and 12 Bottoms 89000-686

VWR Glass Petri Dish, 150x20mm, Case of 12 Tops (89000-326) and 12 Bottoms (89000-686)

VWR Glass Petri Dish, 150x20mm, Case of 12 Tops (89000-326) and 12 Bottoms (89000-686) - The material remains clear after repeated wet or dry sterilization cycles. Dishes feature reinforced beaded edges to resist mechanical breakage and to aid in centering the bottom inside of the cover. Meet federal specification nnn-d-1478. 150 x 20mm. Bottom pieces are marked with a vertical arrow on the side to designate serial dilution starting points. Ordering information packs contain twelve of each piece, packaged in separate boxes. For easy sorting, covers are inscribed in white with the word cover and bottoms are inscribed in blue with the word bottom. Cover pieces feature a fused-on white ceramic enamel marking spot.

 

VWR Waterproof Food Thermometer 4421

VWR Waterproof Food Thermometer 4421

VWR Waterproof Food Thermometer 4421 - Fully autoclavable. Volume ranges from 02 µl to 10 ml. Control company. Significantly reduced plunger forces.

 

VWR 82021-133 Laboratory Notebook with Grid 100 No of Pages 281 mm Length 216 mm Width Black Pack of 12

VWR 82021-133 Laboratory Notebook with Grid, 100 No. of Pages, 281 mm Length, 216 mm Width, Black (Pack of 12)

VWR 82021-133 Laboratory Notebook with Grid, 100 No. of Pages, 281 mm Length, 216 mm Width, Black (Pack of 12) - Acid-free. Notebook covers are waterproof and chemical-resistant. Pack of 12. Country of origin united states. Notebooks keep indispensable data. Notebooks also contain periodic and conversion tables in the back. Vwr 82021-133 laboratory notebook with grid, 100 no. Vwr laboratory notebooks offer a wide array of applications, such as admissibility as court evidence, data on laboratory work, experiment details, and design and development. Part number 1176l87cs. Of pages, 281mm length, 216mm width, black, pack of 12.

 

VWR PTFE Evaporating Dishes  89026-096 - Flat Form Dishes 100 x 55mm 350ml without spout

VWR PTFE Evaporating Dishes, # 89026-096 – Flat Form Dishes, 100 x 55mm, 350ml without spout

VWR PTFE Evaporating Dishes, # 89026-096 – Flat Form Dishes, 100 x 55mm, 350ml without spout - Supplier no 89026-096 unit each description flat- form dishes diaxh 100 x 55 mm capacity 350 ml isostatically molded, fda approved pure ptfe evaporating dishes are chemically resistant and inert with a smooth internal finish. Autoclavable. Usable to 260°c (500°f).

 

VWR 52877-355 Lab Marker Blue Pack of 10

VWR 52877-355 Lab Marker, Blue (Pack of 10)

VWR 52877-355 Lab Marker, Blue (Pack of 10) - When used on glass or metal reusables, or on porcelain surfaces, ink will not smear when subjected to water and can be washed off these surfaces using various solvents, allowing repeated marking. Markers provide permanent marking on plastic disposables. Dries quickly for immediate handling of labware. Vwr 52877-355 lab marker, blue, pack of 10. Pack of 10. Country of origin united states. Provide permanent marking on plastic disposables. Part number 1176k75pk. Durable tip and generous ink supply provide a long product life.

 

VWR Grade 415 Filter Paper Qualitative Crepe - Model 28320-100 - Pack of 100 - Model 28320-100

VWR Grade 415 Filter Paper, Qualitative, Crepe – Model 28320-100 – Pack of 100 – Model 28320-100

VWR Grade 415 Filter Paper, Qualitative, Crepe – Model 28320-100 – Pack of 100 – Model 28320-100 - Vwr® grade 415 filter paper, qualitative, crepe vwr28320-100.

 

Ethyl Acetate - VWR Right-to-Know Safety-Vented Wash Bottles with GHS Labeling

Ethyl Acetate – VWR Right-to-Know, Safety-Vented Wash Bottles with GHS Labeling

Ethyl Acetate – VWR Right-to-Know, Safety-Vented Wash Bottles with GHS Labeling - Bottles are translucent ldpe (sodium hypochlorite is white ldpe for light-protection between 230 and 450nm and toluene is red ldpe) with color-coded polypropylene closures to aid in quick and easy identification. A unique valve prevents pressure build-up, eliminating potentially dangerous chemical drips, and allows dispensing in an upright or inverted position. The 53mm (2″) wide mouth makes refilling easy. Safety-vented wash bottles provide compliance with the globally harmonized system of classification and labeling of chemicals (ghs) and oshaâ€tms hazcom 2012 requirements, as pertains to “workplace labelsâ€. Methyl ethyl ketone and toluene assemblies do not include vented valve. Ordering information assortment orders include 4 bottles per bag, with one each of, acetone, isopropanol, bleach, and ethanol. Note bottles with labels that do not indicate a hazardous chemical do not have/require ghs pictogram or signal word. Pre-printed with chemical name and formula unique valve design improves use and safety translucent ldpe construction with color-coded polypropylene closures they are pre-printed with the chemical name and formula, ghs pictogram and signal word, national fire protection association (nfpa) section 704 four-color diamond, health hazards, chemical abstract system (cas) number, and suggested protective clothing and equipment.

 

VWR 52877-398 Lab Marker Red Pack of 10

VWR 52877-398 Lab Marker, Red (Pack of 10)

VWR 52877-398 Lab Marker, Red (Pack of 10) - Dries quickly for immediate handling of labware. Vwr 52877-398 lab marker, red, pack of 10. Pack of 10. Provide permanent marking on plastic disposables. Markers provide permanent marking on plastic disposables. Part number 1176k76pk. Durable tip and generous ink supply provide a long product life. When used on glass or metal reusables, or on porcelain surfaces, ink will not smear when subjected to water and can be washed off these surfaces using various solvents, allowing repeated marking. Country of origin united states.

 

VWR 89087-398 Traceable Giant-Digit Countdown Timer 84cm Length 76cm Width 13cm Height

VWR 89087-398 Traceable Giant-Digit Countdown Timer, 8.4cm Length, 7.6cm Width, 1.3cm Height

VWR 89087-398 Traceable Giant-Digit Countdown Timer, 8.4cm Length, 7.6cm Width, 1.3cm Height - Timer features automatic bounce back memory for repetitive timing. Three labeled buttons for intuitive operation. 4 cm (15/16″) display can be read from 15 m (50′). Giant-digit 3. Timer is supplied with battery, easel bench stand, and magnetic back.

 

Magnetic Holders - VWR Large Shelf Label Holders

Magnetic Holders – VWR Large Shelf Label Holders

Magnetic Holders – VWR Large Shelf Label Holders - Zero glare self-adhesive or magnetic holder options inserts are easily exchangeable label inserts are easily exchanged without removing the holder from its location. Replacement inserts are supplied in 21. Magnetic holders are easily repositioned on metal surfaces. 9lcm (81/2×11″) perforated sheets and include general formatting and printing instructions. Label holders are made of soft pvc that has been finished to eliminate glare for optimal bar-code readability. Ordering information label holders are provided with inserts. Self-adhesive holders will adhere permanently to any surface. Replacement inserts are laser and ink-jet printer compatible. 6wx27.

 

VWR Heavy Duty Low Form Beaker 600ml Case of 6

VWR Heavy Duty Low Form Beaker, 600ml, Case of 6

VWR Heavy Duty Low Form Beaker, 600ml, Case of 6 - Evenly tooled top rim and spout are designed for optimum performance. Heavy construction, including thick, uniform walls and extra thickness at the top rim, is intended to prolong beaker life expectancy under harder-than-normal usage conditions. Feature a durable matte finish marking area and white graduated scale.

 

Elastic Cuffs No Pockets - VWR Basic Protection SPP Lab Coats

Elastic Cuffs, No Pockets – VWR Basic Protection SPP Lab Coats

Elastic Cuffs, No Pockets – VWR Basic Protection SPP Lab Coats - They may be used to protect against dirt, grime, and certain dry particulates in nonhazardous environments. Available with elastic cuffs or knit cuffs. Lab coats are rigorously tested and manufactured in an iso certified facility under stringent process controls to ensure that each garment meets exacting quality standards and performs to specification. Serged seams. Economical, disposable first-line barrier maximum breathability low linting garments feature inset sleeves, snap front, and tapered collar. Lot controlled and validated through independent lab testing. Vwr® basic protection spp lab coats are manufactured from a spunbonded polypropylene (spp) fabric that is strong, lightweight, and breathable. These knee-length, general-purpose garments are ideal for less critical areas or pre-gowning entry rooms.

 

VWR Standard Orbital Shaker Model 5000 North American 120V 89032-100

VWR Standard Orbital Shaker, Model 5000, North American 120V 89032-100

VWR Standard Orbital Shaker, Model 5000, North American 120V 89032-100 - Ordering information shakers are supplied with a nonskid rubber mat that fits 45. Units also include a 2. All platform, clamp, and rack accessories are sold separately. 3m (92″) detachable 3-wire cord and plug. 7×61 cm (18×24″) trays.

 

VWR 13259-000 Modular Heating Blocks for Micro centrifuge Tubes Aluminum Pack of 1

VWR 13259-000 Modular Heating Blocks for Micro centrifuge Tubes, Aluminum (Pack of 1)

VWR 13259-000 Modular Heating Blocks for Micro centrifuge Tubes, Aluminum (Pack of 1) - Pack of 1. Well diameter 7. 9 mm. Well depth 7. Part number 1176j56ea. Made of aluminum. 5 ml. Single block size. Country of origin united states. 9 mm. The close contact of tubes to block walls allows for maximum heat retention. For tube volume 0. Vwr 13259-000 modular heating blocks for microcentrifuge tubes, aluminum.